Universal abrasion resistant Tester can be used to flat grinding, mill grinding, edge grinding, folding grinding and anti-frost, edge-close and fleece and other wear-resistant test, can be used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber, leather, paper, and many other materials.
2. The instrument can be used to flat grinding, mill grinding, edge grinding, folding
grinding and anti-frost, edge-close and fleece and other wear-resistant test, can be
used for woven fabrics, knitted fabrics, coated fabrics, fleece fabrics, socks, knitted
fabrics, knitted fabrics, felt, nonwoven, deep fabric, yarn, cord plastic film, rubber,
leather, paper, and many other materials. The test sample may be dry or immersed in
water, oil, or other liquids.
The instrument is mainly composed of control system and friction system. The sample
is installed on the clamp and is tightened. The upper fixture with the sandpaper is go-
ing down, adjust the position of the weight so that the sandpaper in contact with sam-
ple surface, through the control system set the number of friction times of the sample,
and start the instrument. The lower fixture base does front-to-back motion, so that the
sample and sandpaper being rubbed against each other. When the number of times the
movements reach the set value, the instrument stops and remove the sample to observe
the degree of wear.
Suitable for testing all kinds of fabrics, including wear performance and wear re-
sistance of clothing, shoes and industrial textiles.
ASTM D3514/D3885/D3886,AATCC 119/120,FTMS 191/5300/5302,FORD
EFB 15J2/BN 112-01
1
www.qinsun-lab.com info@qinsun-lab.com
Stable reliable and consistent
Introduction
Standards
Accessories
Frosted accessories
Cloth edge and fold between the friction sample
Elastic friction pad
Abrasive 50 yards / roll
3 rating cards for ASTM D3514
3. The test runs in automatic mode, ensuring both accurate of the test results with repeat-
ability and eliminating the need for the operator to evaluate the test results;
The advanced gripping device ensures constant sample tension;
With a flat-grinding test head (inflatable membrane type of wear test method) and a
mill-grinding test head and the required weight and the initial abrasive;
Built-in timer and mechanical cycle counter;
The machine with a reciprocating table, flat grinding / mill grinding test head mount-
ed on top;
Clamping ring inner diameter: 94 mm;
Lock ring height: ≤9.5 mm;
Speed: 120 ± 15/min;
Moving: 25 mm;
Air pressure: 62 kPa (9 psi);
Dimensions: 330 × 500 × 460mm (length × width × height);
Weight: 33kg (72lb);
Stable reliable and consistent
Technical Parameters
Qinsun Instruments Co., LTD
info@qinsun-lab.com
Tel:021-64200566
Fax:021-64200566-810
Address:No.258 Ban Ting road, Song Jiang district, Shanghai
For more information:www.qinsun-lab.cn/Products/
2
All copyrights and brands are reserved by Qinsun Instruments Co., LTD. Specifications,
terms and pricing may alter from time to time. Please consult your local sales repre-
sentatives for detailed product configuration.