Contact Picson Construction Equipments for C&D waste recycling plant manufacturer in India. The technique of recovering, recycling, and reusing materials and waste generated during the construction, refurbishment, and destruction of roads, bridges, and buildings

1. C & D Waste Recycling Plant
The process of recycling, recovering and reusing waste materials obtained at the time of
construction, destruction, or renovation of bridges, buildings, or roads is referred to as
construction & demolition waste recycling or C & D recycling. A plant that caters to the
recycling requirements for construction and demolition waste is referred to as C & D waste
recycling plant.
A Brief on C & D Waste
C & D waste or construction & demolition waste refers to the waste obtained from the
construction, demolition, repair, and renovation of huge building structures, large houses,
roads, bridges, dams, and many more. C & D waste consists of concrete, steel, wood,
masonry, gypsum, plaster, asphalt, and metal. The waste from construction and demolition
waste is notable since it contains an array of hazardous materials like lead and asbestos. The
amount of waste tends to vary, but it is estimated that about 15-20 percent of the entire
municipal solid waste comes from various construction and demolition projects.
How Does C & D Waste Impact the Environment?
Improper management of waste resulting from construction & demolition can be a huge
urban threat since it negatively impacts the environment. Construction and demolition waste
happens to be a major source of air pollution. Designated landfill sites happen to occupy huge
real estate, and land worth billions of dollars is buried under the waste arising from
construction & demolition. Uncontrolled and widespread illegal dumping of C & D waste in
lakes and rivers results in the destruction of the water bodies.
What can be the Solution?
Carrying out a few essential steps can certainly prove to be the right solution in this regard. It
will be great to divert the construction & demolition waste from disposal by practicing
reduction at source, salvaging, recycling as well as reusing the existing materials, and buying
used and recycled materials & products.
• Reduce: Source
Reduction at the source plays a significant role in reducing the use of life-cycle material, use
of energy and generation of waste. It is true that recycling and reusing are vital methods that
facilitate the sustainable management of waste after its generation. However, reduction at the
source helps prevent waste from being generated in the first place, which proves to be quite
beneficial.
• Reuse of Construction and Demolition Materials
Demolition of existing buildings and disposal of the debris is certainly not a practice that
proves to be resource efficient in nature. Recovery of used C & D materials that are still
valuable for further use happens to be an effective way to save money along with the
protection of natural resources.
• Recycling of Construction and Demolition Materials
There are a number of building components that are possible to recycle where markets exist.
Concrete, rubble, and asphalt are many times recycled into aggregate or form new asphalt or

2. concrete products. It is also possible to recycle wood into products like furniture, mulch,
compost, and a number of other products. Metals, including brass, copper, steel, etc., are also
valuable commodities to recycle. Moreover, cardboard packaging from building sites is
usually not classified as a construction & demolition waste material. However, it falls into the
mixed construction & demolition waste category, and several markets exist for recycling this
material.
Customize Your C & D Waste Recycling Plant
If you are looking forward to recycling the construction & demolition waste efficiently and
effectively, PICS International would certainly be one of the best options in this regard. The
recycling equipment available at PICS International can help sort the problem of management
of C & D waste at any site without any hassle. Our machines have the potential of capable of
to treat bulk debris and provide great results.
At PICS International, two types of systems in C & D recycling waste are offered that are
discussed below.
1. Dry Line Process
The dry line system from PICS International involves the use of recycled aggregate from C &
D waste in which the waste collected is fed into the recycler so that it can be converted from
big, unmanageable size waste into suitable size aggregate such as 40 mm, 20 mm and 10 mm.
After recycling, the aggregate is used in concrete, where further properties of concrete are
tested, such as durability properties, workability, microstructure, and hardened properties.
2. Wet Line Process
The wet line system from PICS International makes sure that the recycled aggregate product
is free from clay, dirt, plastic, wood, and organic materials. These machines are capable of
breaking down & eliminating harmful material from recycled aggregate feeds as well as
liberating fines and floating out lightweight trash like wood, plastics, sticks and other debris.
Technologies Involved
The high-end recycling plant of PICS International involves the following technologies.
• Feed hopper
• Recycler
• Pre-screening
• Washing and aggregate cleaning
• Trash screen for removal of light weights
• Sizing screen for washed aggregate
• Hydro cyclone system for sand washing
• Water management system for process water recycling
Why Choose PICS International for C & D Waste Recycling?
PICS International is a name that you can blindly trust in the field of C & D waste recycling.
The company offers unmatched services and solutions, including superior post-sales service,
thereby ensuring a hundred percent satisfaction among all. Here are a few reasons why PICS
International is a leading name in C & D waste recycling industry.

3. • Manufacturing Expertise – PICS International’s manufacturing expertise overcomes
the infrastructural challenges of coming up with products that ideally serve the
intended purpose of use.
• Superior Performance – Every tool, machinery, and equipment available at PICS
International is guaranteed to offer superior performance to ensure high functionality.
• Commitment to Top-Notch Service – PICS International assures top-notch after-
sales support to make sure that the supplied equipment run and functions smoothly
without any kind of interruption.
• Quality Assurance – Every product available at PICS International passes through
rigorous quality testing to ensure that they necessarily meet the international quality
standards.
• Complete Product Training – PICS International offers complete training regarding
the usage as well as functionalities of every product it manufactures and supplies.
• Dedicated Support – PICS International offers dedicated round-the-clock support to
ensure that users can connect for help without worrying about the current time.