Creating Low-Code Loan Applications using the Trisotech Mortgage Feature Set
Course Roof Rats What You Need To Know.doc.pptx
1. What You Need To Know
Order Rodentia : Family Muridae : Rattus rattus
Description. A blackish (or brownish), medium-sized, slender rat with
long, naked, scaly tail; tail usually longer than head and body.
Habits. Roof rats are live in close association with man. They may live
near the ground, but usually they frequent the attics, rafters, and
crossbeams of the buildings. They make typical runways along pipes,
beams or wires, up and down the studding, or along the horizontal ceiling joists, often leaving a
dark-colored layer of grease and dirt to mark their runways. The roof rat is nocturnal and only where
populations are relatively high are they seen in the daytime.
Breeding. Roof rats breed throughout the year, with two peaks of production — in February and
March and again in May and June. The period of least activity is in July and August. Each year,
females have six to eight litters with four to 12 pups in each litter. The gestation period is
approximately 21 days They are reproductively mature in three months.
Diseases.
Hantavirus Pulmonary Syndrome (HPS): Hantavirus pulmonary syndrome (HPS) is a deadly
disease transmitted by infected rodents through urine, droppings, or saliva. Humans can contract the
disease when they breathe in aerosolized virus. HPS was first recognized in 1993 and has since
been identified throughout the United States.Although rare, HPS is potentially deadly. Rodent control
in and around the home remains the primary strategy for preventing hantavirus infection.
Murine Typhus: Murine typhus (caused by infection with R. typhi) occurs worldwide and is
transmitted to humans by rat fleas. Flea-infested rats can be found throughout the year in humid
tropical environments, but in temperate regions are most common during the warm summer months.
Travelers who visit in rat-infested buildings and homes, especially in harbor or riverine environments,
can be at risk for exposure to the agent of murine typhus.
Rat-bite fever (RBF): Rat-bite fever (RBF) is a systemic bacterial illness caused by Streptobacillus
moniliformis that can be acquired through the bite or scratch of a rodent or the ingestion of food or
water contaminated with rat feces.
Salmonella enterica serovar Typhimurium: As its name suggests, it causes a typhoid-like disease
in mice. In humans S. Typhimurium does not cause as severe disease as S. Typhi, and is not
normally fatal. The disease is characterized by diarrhea, abdominal cramps, vomiting and nausea,
and generally lasts up to 7 days. Unfortunately, in immunocompromized people, that is the elderly,
young, or people with depressed immune systems, Salmonella infections are often fatal if they are not
treated with antibiotics.
Leptospirosis: Leptospirosis is a bacterial disease that affects humans and animals. It is caused by
bacteria of the genus Leptospira. In humans it causes a wide range of symptoms, and some infected
persons may have no symptoms at all. Symptoms of leptospirosis include high fever, severe
headache, chills, muscle aches, and vomiting, and may include jaundice (yellow skin and eyes), red
eyes, abdominal pain, diarrhea, or a rash. If the disease is not treated, the patient could develop
kidney damage, meningitis (inflammation of the membrane around the brain and spinal cord), liver
failure, and respiratory distress. In rare cases death occurs.
2. What you should know about ROOF RATS:
● Roof rat droppings are long and cylindrical.
● Roof rats are nocturnal.
● Roof rats will enter homes and buildings. They only need a hole the size of a quarter to gain entry.
● Roof rats are good climbers. They can climb walls and use utility lines and fences to travel from
structure to structure.
● Outside, roof rats will nest in trees, woodpiles, garbage, and plants.
● Inside, high places, like attics, are their preference.
● Roof rats eat fruits, vegetables, nuts, pet food and invertebrates (spiders, snails and worms, for
example). They will also eat paper.
If you have the following items around your home, you may be more prone to attracting roof rats:
ROOF RAT HABITAT
Roof rats may live or establish their nests in:
Your home attic and walls
Algerian ivy
Palm trees
Yucca
Pampas grass
Honeysuckle
Blackberries
Italian cypress
Juniper tams
Star jasmine
Other heavy shrubbery
Wood and lumber piles
Storage boxes
Yard and garden storage
Research shows that by eliminating or reducing environmental conditions that are conducive to pest activity
you can strongly reduce or eliminate rodent infestations. This checklist is designed to provide the information
necessary to assist you in your efforts to keep a home rodent free after the initial service.
☐1) Remove stored items in close proximity to the structure.
☐2) Cut grass and/or weeds along the foundation.
☐3) Install hardware cloth over foundation vents.
☐4) Install hardware cloth over roof vents.
☐5) Install hardware cloth over marked openings.
☐6) Remove accumulated grocery bags & newspapers.
☐7) Repair interior plumbing leaks.
☐8) Repair exterior plumbing leaks
☐9) Caulk or seal around plumbing penetrations.
☐10) Move stored boxes 6” from walls.
☐11) Install weather striping along bottom of doors.
☐12) Remove pet food and water dishes when not used.
☐13) Store pet food in sealed containers.
☐14) Keep trash in sealed containers.
7. INSPECTIONS
The inspection provides you with valuable information.
The extent and severity of the infestation. Is the problem localized in one area of the building? Are the
rodents infesting several rooms? How sever is the infestation? By accurately gathering this information prior to
any control efforts, time and money can be saved by doing a thorough inspection. A common mistake in rodent
control is to underestimate the severity of an infestation either in numbers of animals or by the area infested.
The location of rodent harborage and activity areas. By inspecting for various rodent signs, clues can be
gathered as to the location of nesting areas, as well as where and how the rodents travel from nests to their
food and water. By intensifying your control efforts at these locations, greater control can be achieved.
Inspection.
8. On the exterior...
Identify the rodent entry areas. A thorough inspection of the exterior of the building should be conducted.
Areas to inspect include all utility lines that enter the structure through the walls. All openings around water
lines, air conditioning ducts, drain pipes, vents and electrical conduits should be inspected. Of course, the
spaces beneath doors are one of the most common entryways for rodents. Doors should be checked to ensure
the lower edge is not more than ¼ inch from the floor. Broken basement windows and unscreened vents also
are common invasion routes. Also check storage sheds, garden sheds and potting sheds along with exterior
heater closets.
In the case of roof rat inspections, roofs should be checked to see that sheathing is complete and there are no
openings at roof junctures where one roof over laps or ties into another roof. In addition, check roof ventilators,
screen vents and louvered in-wall vents and chimneys.
Locate the areas of rodent activity. The key to effective inspections is to identify the primary harborage, feeding
and activity areas to get the best results. Typically, rodents build their nests near food sources. Therefore, the
control areas are those areas between the nest and feeding areas.
When conducting inspections it’s a good idea to think in terms of what rodents require. Inspect the building and
list all of the areas where food is available. An adult rat requires up to 1 ounce of food and water daily to
survive, food has to be readily accessible. Keeping this in mind during your inspections, begin by locating all
areas in and out of the account that provide food for rodents. This is especially useful when inspecting
structures where there is a minor infestation and the rodent zone is difficult to pinpoint. Keep in mind if there is
an abundance of snails or fruit that could be the food and water source.
On the interior...
Inside structures, a few of the more common rodent harborage locations include the following:
● Secluded corners (remember rodents follow wall surfaces and prefer corners because these areas
provide them with a sense of security)
● Beneath and inside cabinets
● Beneath and within furniture
● Beneath and behind large appliances
● Floor cabinet voids in kitchens
● Base voids in dresser bureaus
● Wall voids
9. ● Ceiling voids
● Sill plate areas on top of basement and crawl space foundation walls
● Attic areas
● Storage areas over a garage
● Basements
There are rodent signs you should look for with roof rats: 1) droppings (feces); 2) gnawing damage;
3) runways; 4) tracks; 5) grease marks (rub marks) ;6) urine stains; 7) visual sightings of live or dead rodents;
8) rodent sounds; and 9) rodent odors.
Gnawing damage. Evidence of recent gnawing and/or damage as a result of gnawing is an excellent sign for
determining the presence of rodents. Rodents gnaw on many items including aluminum, mortar, plastic, lead
and any other items softer than the enamel of their incisors.
Urine stains and odors. Rodent urine is often deposited on their runways and other frequented areas. Under
ultra-violet light, rodent urine will fluoresce yellow on burlap bags and pale, blue-white on various packaging
paper. Rodent odors are often detectable in well established infestations.
Rodent sightings and sounds. Obviously, seeing live rodents during an inspection is a sure confirmation of an
infestation. Various sounds produced by rodents and their young are high-pitched squeaks, gnawing and
scratching sounds, and sounds of rodents moving across and attic.
Runways, tracks and grease marks. Runways are usually evident in rodent infestations because rodents
repeatedly use the same pathways between their nests and food sources.
Control strategies. In some situations you will have a wide range of control tools and strategies from which to
choose. In other cases, however, your control options may be limited due to food exposure, safety precautions
for children and non-target animals, and various environmental factors. All this can be determined through your
inspection. Of course, the goal is not only an effective control program, but one a safe one.