PT204P reader is an industrial-class 4-in-1 reader developed by PIOTEC. It adopts advanced embedded system design solution and open system structure, fully supports secondary development as well as meets various smart card manufacturers’ requirements of high speed and strong stability.
Application Scope: SIM Card, Banking Card, ID Card, M2M Chip
Welcome to contact us!
inquiry@piotec.cn
2. www.piotec.cn
Contact Reader
Overview
PT204P reader is an industrial-class 4-in-1 reader developed by Piotec.It adopts advanced embedded system design solution and
open system structure,fully supports secondary development as well as meets various smart card manufacturers' requirements
of high speed and strong stability.
Application Scope: SIM Card, Banking Card, ID Card, M2M Chip
PT200 series
PT201N PT204P
Details
Configurations
Master CPU 32bit ARM9
Dominant Frequency: 454MHz
SDRAM:128MB/channel
Nand Flash:128MB/channel
48P Europe-type terminal
10M/100M Ethernet interface integrated
Power supply interface integrated
Control interface integrated
Smart card reader functional interface
RJ45 interface
4U assy, reader quantity and assy size are customizable
Standard Dimension:320mm×460mm×178mm(10 PT204P
mainboards and 40 readers in total can be assembled)
Name
CPU
Storage
Main Interface
Smart card reader functional
interface
Assy configuration
3. www.piotec.cn
█ Adopting Linux embedded system
█ Conforming to ISO/IEC 7816-3 standard and supporting
T=0,T=1 protocol
█ Adjustable personalization frequency up to 20MHz
█ Adopting TCP/IP network communication protocol
█ Secondary development fully supported
█ Executing chip initialization,pre-personalization and
personalization with high efficiency
█ High efficiency power design with lower power consump-
tion and lower heat
█ Based on plug-board design, any quantity of ports
between 4 - 48 can be combined into the assy according to
the requirement
Advantages
encoding solution for smart devices
Ultra-high cost performance of industrial-class
PT204P-RACK 10 SLOTS
Supporting 5V/3V/1.8V supply voltage, ±10%
12~26VDC
-20℃~+ 85℃
50%±10%
less than 2W/4 channels
8W / 4channels
65mA ClassA/50mA ClassB/30mA ClassC
Default frequency is 3.57MHz
Supporting any value between 1-20MHZ(Adjustment accuracy:1KHz)
The manual and automatic mode of PPS can be configured
Baud rate can be supported up to 460.8Kbps(PPS 97)
Supporting CLASS ABC
Name
ISO7816 Interface Operating Voltage
External Supply Voltage
Operation Temperature
Operation Humidity
Reading/Writing Standby Power
Reading/Writing Rated Power
ISO7816 HOST Interface Max. Output Current
Perso Frequency
Baud Rate
ISO7816 Interface Output Voltage
Parameter
Technical Specification
4. www.piotec.cn
Performance Index
Name
Communication Protocol
Security Guard
Operating Mode
Address Setting
Operating System
Details
Supporting T=0, capturing reponse data automatically can be settable
(default off); Supporting T=1;
ESD protection, short circuit protection and overcurrent protection supported;
Transparent operation of IC card interface chip, the operating mode can be
modified directly;
IP address can be set up by dial switch; Any IP value between 0-255 can be
configured;
Built-in Linux system makes secondary development flexible and applica-
tions can be customized easily.