1. Dipl.-Ing. Electronic
Master in Sciences Management
Master in Electronic Engineer
Nord González
Steckendorfer Str. 93
47799 Krefeld - DE
Dear Sir/Madam,
I am very interested in the job vacancy you have advertised on your website, it would be for me the
perfect opportunity to grow professionally within a renowned company.
I am an Electronic Engineer with a high degree of qualifications and eight years working experience
in the fields of I.T, Telecommunications and Electrical engineering. I have successfully completed
a Master in Electronic Engineering as well as a Master in Project Management and I am a Cisco
Certifications holder. In addition, I hold a diploma in Renewable Energy, Solar and Photovoltaic.
In February of 2015, I was accepted in a Scholarship Program for Engineers and Doctors by the
HSBC Bank to learn German in the Goethe Institute in Düsseldorf. Right now I have more than one
year living here in Germany. Right now I am looking for a job that really match with my profile and
experiences. I am very hardworking and it would be for me a honor and a privilege to contribute to
your company with my knowledges and experiences, which I summarized in the following list:
Higher Education and Responsibilities:
· Project Management, Couching, and Team Working Leader
· Planning, Coordinating, and Implementing Project
· Commissioning of Telecommunications and Renewables Energies
· Field Engineer supervisor and coordinator
· Technician in IT and Data Networks and Renewables Energies
Certifications with Cisco technology:
· CCNA 640-801; CCNA Security 640-553
· CCDA Design 640-863
· Cisco CCIP 1/3: MPLS 642-611
· Cisco CCNP 1/3: SITWCH 642-611
Other knowledge and skills in Telecom and Networking Area:
· Huawei Technology: BTS / UMTS / 3G / LTE 4G.
· Radio Base Station installations of Antennas and Radios in Tower.
· Communication protocols: OSPF, EIGRP, RIPv2, BGP, MPLS, VPN
· Ethernet Technology: WAN, MetroEthernet, LAN, VLAN, NGN and Wireless
· Design and Implement Optical Systems Transmission LLD: DWDM, PDH, SDH
Other knowledge and skills in Energies.
· Electrical Power, Low – Medium and High Voltage
· Electrical current AC/DC, AC/AC, DC/DC, Inverter, Regulator, Transformer
· Wind Turbines: Commissioning of Vesta, Siemens, GE
· Photovoltaic Energy: Design, Cost, Planning and Implementation
I really wish to be considered for this vacancy and I am looking forward to your response, and a
chance to discuss how I can contribute to your company in an interview.
Yours faithfully,
Nord Gonzalez.
2. Curriculum Vitae
NORD GONZALEZ
Personal Information
First name / Surname: Nord Gonzalez
Date of Birth: 12.10.1983
Nationality: Spanish / Venezuelan
Address: Steckendorfer Str. 93
47799 Krefeld – Germany
Mobile: +49 (0)162 517.65.21
E-Mail nordgonzalez@yahoo.es
Skype: nordgonzalez
University Studies
Sep. 2011 – Jun. 2014 Master in Electronic Engineer
La Laguna University, Canary Islands (Spain)
· Digital and Analogical Communications.
· Optical Communications: DWDM, WDM SDH, PDH.
· Digital Modulations: ASK, FSK, PSK, BPSK, QPSK.
· Electricity: AC/DC, Rectifier, Transforms, Motors.
· Renewable Energy: Wind Turbines, Photovoltaic.
Jun. 2009 – Jul. 2010 Master in Science in Management
Caribbean International University, (Netherlands Antillen)
Willemstad - Curaçao
· Project Management
· Project Planning – Commissioning
· Coordinator – Supervision
· Leader – Couching
Sep. 2003 – Sep. 2008 Electronic Engineer
Polytechnic Santiago Mariño, Caracas (Venezuela)
· Optical Communications: WDM / DWDM, SDH.
· Digital Communications and Digital Modulations: ASK, FSK,
PSK, BSFK, BPSK, QPSK and QAM
· Electricity: AC/DC, Rectifier, Transforms, Motors
· Power Electronics / Electricity
Other Knowledge and Studies
Oct. 2014 – Feb. 2015 Diploma in Wind power, Photovoltaic and Water
Institute for the Technology of Canary (ITC),
Tenerife Island (Spain)
Sep. 2014 – Nov. 2014 Professional Certificate in Photovoltaic Installation
FEMETE Institute, Tenerife Island (Spain)
Cisco Systems Networking Certifications (Valid until 2017)
· CCNA 640-801
· CCDA Design 640-863
· CCNA Security 640-553
· CCIP 1/3: MPLS 642-611
· CCNP 1/3: SWITCH 642-813
(Approved in 2014)
3. Work Experience in Energy and Telecommunications
Jun. 2015 – Nov. 2015 Electrical and Electronic Operator
SiempelKamp ATR, Krefeld (Germany)
I worked there as an operator of industrial equipment. My duties
included the reading of plans and the installation of electrical
protections, relets, transforms, converter, rectifiers, electronic cards
with Bus-Cam port, digital displays and cabling all the components
in the rack and case.
Once the Electrical Rack is complete, I conduct preventive tests
before installing it in the client company. I was also sent on site for
the inspection of devices.
Oct. 2014 – Feb. 2015 Field Engineer in Renewable Energies
ITC, Santa Cruz, Tenerife (Spain)
In ITC, I worked as an operator of industrial equipment and renewable
energies. My duties included the planning, coordination and
implementation of a project start-up in a renewable energy field. I also
planning the installation of equipment such as: Photovoltaic Energy
Panel, Wind Turbine, and Electricity; and carried out its preventive
maintenance and made some Commissioning, as well as taking care of
the preparation & control of technical reports. I also worked with the
HOMER program for cost effectiveness and high quality project
execution.
Apr. 2014 – May 2014 Field Engineer in Renewable Energies – Internship
Tefcan, San Cristóbal de La Laguna (Spain)
As Field Engineer, I installed Photovoltaic Energy Panel, Electricity and
Wind Power Generator. My activities and responsibilities also included
the fulfilment of all Quality Standards with full documentation and the
Preventive Maintenance in Wind Power Generator.
Aug. 2011 – Nov. 2013 Telecommunications Equipment Operator – Engineer
Socassat, Santa Cruz of Tenerife (Spain)
I worked for mobile equipment supervising its installation for businesses
such as BTS (Base Transmission Station). I was handling technologies
such as Huawei BSA 3900, and I had to communicate with Data Centres
to notify faults on site (e.g. node connection testing, activate or
shutdown some ports or protocols, Calculations with Anritsu
Technology to made possible some measure of ROE, power and Radios
frequency at the output of the antennas). In some instance I had to upload
scripts to resolve any other problem before the delivery of the device.
Other important activates were the coordinate the installations of:
- Radio Base Station for: GSM, GPRS, UMTS,
LTE and WCDMA technologies.
- Router and Switch L2/L3 Huawei 3528.
- Huawei BSA and Radio IP Ericsson.
- Remote Radio Unit Ericsson and Nokia.
- Optics Fiber (SM, MM) and RF cable.
- Dual antenna and Tri-band.
4. Jul. 2009 – Jul. 2011 Telecommunications Equipment Operator - Project Manager
Venetel S.R - CANTV’s Outsourcing, Caracas (Venezuela)
I worked on IPTV project where I was responsible for this project in its
Network design, implementation, support and installation of the
networks equipment such as:
- Core Switch ZTE 8902 / Access Switch ZTE 5952
- Alcatel's DSLAM 7302
- Redware and Juniper Firewall and Load Balancers
I also supervised the technical personal:
- Installation of Router and Switches Huawei, Alcatel and Cisco
- Manage and review the optical designs and connexions plans
- Manage the Installation of Optical fiber (MM-SM / Transceivers
10/40 Km), coaxial and Ethernet cables
My other responsibilities were the network planning and monitoring of
the system transmission like: DWDM, PDH, SDH, and STM-1 Card
with Huawei and Alcatel Lucent Technology. I also manage the security
implementation such as the configuration TACACS+ or RADIUS to log
warnings generated during unauthorised access via VPN. I Applied
Scanners or Sniffers to identify how vulnerable the equipment was, I
implemented access lists and firewall to close ports, and configured SSH
access for the remote computers.
Feb. 2009 – Jun. 2009 Telecommunications Equipment Operator - VoIP Specialist
ZUP Integradores - CANTV’s Outsourcing, Caracas (Venezuela)
As a specialist at the Engineering Department of NGN Project (Next
Generation Network) in partnership with Huawei, my responsibilities
were to install five Softswitch and four hundred UA5000’s Nodes. We
had to make some Logical Migration from PSTN Network to the Nodes
Huawei’s Multiservice UA5000.
I had to implement the following communication protocols:
- R2 and SS7 Signalling. Gatekeeper and H.323
- Subscriber new telephone lines
- Made Logical Migration and entry data in Packets
- Upgrades the UMG Huawei and Softswitch
- Worked with the Huawei Softswitch softx3000 program and
Huawei U2000 imager Operations
- Implement a System Transmission with: DWDM, PDH, SDH,
STM-1 / STM-4 Card with Huawei and Alcatel Lucent Technology
Jan. 2007 – Jan. 2009 Telecommunications Equipment Operator – Engineer
SGH Consulters - CANTV’s Outsourcing, Caracas (Venezuela)
I used to make inspections and supervise the field crews (Technical Staff
and Contractors) in different nodes of the country during the installation
of the Ring Metro Ethernet network. I provided acceptances for the
Preliminary Engineering reports and Final details reports.
The equipment that was installed and configured were Switches and
Routers such as:
- Cisco GRS 12400, Cisco 6700 and 3550
- Alcatel Lucent 7450-7250 and Huawei 3528
- Ericsson Mini-Link IP Radios.
The configuration of protocols was mainly MPLS, VPN, VPLS, SAP,
SMP, MESH, SSH, Tacas+, RADIUS and VLANs.
5. Sept. 2006 – Jan. 2007 Telecommunications Equipment Operator - Analyst Junior
SPI - Telefonica’s Outsourcing, Caracas (Venezuela)
As an Analyst, I was working with the PABX Systems of Ericsson and
Avaya. My role consisted of giving users the sufficient support within
the application of IP Phones, when a failure was originated in the Central
Telephone Room. In addition, I had to generate internal network, trunk
lines failure reports.
The equipment that I used to install and configure were:
- PABX Ericsson and IP phone Ericsson
Renewable Energy Knowledge
· Support and execution of the commissioning of Wind Turbines and Photovoltaic Park
· Commissioning and support of the park network, Scada
· Debugging, fault resolution of control systems and operating system
· Ability of working at heights, for example tows, wind turbines
Telecommunication Skills
· High Knowledge in Cisco, Huawei and Alcatel: Router, Switch, Load Balancers, F5
· High Knowledge in Ethernet Technology: WAN/LAN, VPN, MPLS, ATM, VPLS, VLAN
· Specialist in Optical Fiber Connectors and High handling with the Optical Fiber's splicer
· High Knowledge in Mobile Phones Platforms like: BTS GSM equipment / UMTS RRU and
RFU radios, E1s, Radio Links with Ericsson’s radio IP, Dual Antennas and Antennas Tri-
bands
Computer Skills
· Proficient in most types of Windows OSs / Basic Knowledge in Linux
· Microsoft Office / Microsoft Project
· Basic Knowledge in Scada
· Basic Knowledge in HOMER Program
Language Skills
· Spanish: Native Speaker
· English: Avanced
· German: Intermedium; (Goethe Institute Düsseldorf from February until May 2015 by HSBC
Bank Study Program, German course for Engineers and Doctors with high qualifications and
experiences)
6. Personal Reference in Germany
HSBC Bank 03.02.2015 - 03.06.2015
(5 Monate / Stipendium Programm)
Sektor: Deutsch Kurs.
In Deutschland bin ich seit Februar 2015, da ich mich hier gezielter nach einer meinen Qualifikationen
entsprechenden Arbeit umsehen möchte: Im Rahmen eines Stipendiat von HSBC Trinkaus Jugend &
Bildung von Februar bis June 2015 erwarb ich grundlegende Deutschkenntnisse (Sprachniveau B1).