2. Send us a Quote
Creating long lasting partnerships since 2005
Customer Service: 716-795-3860 | sales@jtprecision.com
When your needs exceed the basics, we are here for you.
SPC: We monitor the critical features of your important parts through-
out the manufacturing run. Data is collected and processed as set up by
our engineering and quality team.
PPAP: We are experienced working in this environment. A stringent
policy is in place and monitored to preserve the approved process when
subsequent orders are manufactured.
Gage R&R: We work with each other to get the proper result. Engi-
neering, Quality and Manufacturing teams work out a robust inspection
process. Spending time here is always faster than making it again!
Programming: Custom post processors are written in house to
accelerate the job to the shop floor, with minimal editing at the machine.
Part Maker and SolidWorks are used to create seamless code and superior
part quality.
Finishing Department: Our Trained staff of finishers separate us
from the others. De-burring and polishing under magnification is a daily
process. We have the experience to get the “hard to find burrs” of the part
while preserving the typical call-outs of sharp corners and tight tolerances.
Grinding Department: We have 3 “Sharp” surface grinders and
1 “Supertec” universal grinder with collet attachment and touch probe
options. Sharp grinders are 12’’ x 24’’, the Supertec is 24’’ between centers
and 8’’ diameter capacity.
Nothing But The
Facts
Quality
CMM - Tesa - Micro - Lite 3D
Comparitor - Starrett
Digital Height Gauge - Mitutoyo
Finishing
Vision System - Mantis; Starrett
Precision Deburing Under Magnification
Stereo Microscopes
Air Brasive Jet Machine
We can inspect down to .000020 of an inch,
hard to find burrs will not be missed.
LET US BEYOUR FULL
SERVICE SUPPLIER
Laser Etching
Heat Treat
Surface Treatment
Welding
Brazing
Centerless Grind
Plastics
Metals
Exotics
Custom stocking programs
Give us your Kan-Ban & blanket orders
3. Precision Machining
9x Swiss Machines
6x Turning Machines
10x Milling Machines
Make: Star
Equipped with magazine bar feeders to handle large pro-
duction jobs and lights out operations. Our machines have
up to 7 Axes with capabilities from .020 - .812.
Make: Doosan
We have the ability to turn and mill as needed to make
parts complete. With sub-spindles, Y-axes movement and
Live Tooling, we can manufacture high quality parts with
less manual loading.
Make: Kia & Doosan
We machine burr-free medical components, boring and
milling tight tolerance small weapons parts, thread milling
high strength alloys, and drilling small diameter holes
(.005”) in fuel, oil and air nozzles. We have fourth axis
milling, coolant-through-tooling and our own custom
fixtures.
We will meet your exact needs.
Medical Small Arms Aerospace Gas & Oil Government
Let us quote your 1,000 to 100,000 piece job today!
4. 8701 Haight Road
Barker, NY 14012
Tel: 716-795-3860
Fax: 716-795-3861
sales@jtprecision.com
Illustrations are to enable the reader to make his/her own evaluation and are not intended as warranties, either expressed or implied. All images are property of JT
Precision, Inc. Copyright 2015 JT Precision, Inc. All rights reserved.
www.jtprecision.com | 716-795-3860
