2. FracSolution Technologies, 507 North Sam Houston Parkway East, Suite 505, Houston, TX 77060
Phone: (800) 605-8292
www.fracST.com
AQUA PERF BALLS
Ball Diameter: 0.500”, 0.625”, 0.750”, 0.875”, 1.000” (Inquire about other sizes)
Density: 1.39 g/cc
Balls do not require refrigerated storage or special handling
Shipping and Storage Conditions: Standard ambient conditions when bagged
Customizable temperature performance available upon inquiry
MidTEMP
150 to 220 degF – Aqua color
Compressive Strength: Minimum 7000 psi using 0.875” ball with 0.094” interference
In 72 degF water, 0.875” ball absorbs water but does not dissolve after 11 days
LoTEMP
50 to 120 degF – White color
Maximum storage temperature: 140 degF
Compressive Strength: Minimum 7000 psi using 0.875” ball with 0.094” interference
In 72 degF water, 0.875” ball absorbs water initially and fully dissolves in 11 days
0
0.5
1
0.00 1.00 2.00 3.00 4.00 5.00
BallOD,in
Hours in Boiling Water
Ball OD vs Time in Boiling Water
“In searching for a non-standard size biodegradable ball for acid work I approached FracSolution
Technologies who were willing to make me the non-standard size. The customer eventually decided on a 7/8”
ball, but because of FracSolution Technologies willingness to make a ¾” ball for me I tried their Aqua Perf
Balls in a 20,000 gallon treatment. The treatment had a pump time of about an hour so some of the 400 balls
were loaded in the gun for nearly two hours and we had no problem getting them to leave the gun. We saw
good diversion near the end of the job as we expected and I was pleased with the overall performance of the
Aqua Perf Balls. I’ve since reordered them because we also liked their lower price point which in this market
is very important.”
Mike Johnston - Torqued-Up Energy Services