Motionics Wireless Laser Rangefinder (WLRF) packs a WASP-200 LRF ultra-compact laser rangefinder. It is capable of quickly and accurately identifying the distance to a target up to 200m away. With built-in Bluetooth Low Energy transmitter, laser measurement readings can be wirelessly viewed and collected on iPhone/iPad. There is an inclinometer embedded inside WLRF to monitor device tilt angle simultaneously with laser distance measurement, facilitating applications that require intersection scanning. WLRF has a standard ¼-20 thread mounting hole to allow user to easily mount the device on a common tripod for quick and steady setup.

1. Wireless Laser Rangefinder
WLRF User Guide
Motionics, LLC www.motionics.com info@motionics.com
8500 Shoal Creek Blvd Building 4 Suite 209, Austin, TX, 78757
© 2018 Motionics, LLC. All rights reserved. Made in the U.S.A
Important Notes!
Turn off the device after use. It will NOT turn off automatically.
Do NOT open the device. Opening causes permanent damage and voids
the warranty.
Do NOT stare directly into the apertures of the laser.
Description
Included in the box
Compatible Software
Quick Start
iOS: MultiGage Reader
iOS App can be directly downloaded from the App Store for FREE.
WLRF Base 1X
USB Charging Cable 1X
USB Power Adapter 1X
User Guide 1X
Turn on your WLRF.
Run MultiGage Reader App on iPhone or iPad.
In the main page, tap + button to bring up a new pairing page.
Wait for the software to finish scanning nearby devices, select WLRFXXX
to connect.
Connection may take a few seconds, once paired, instrument reading
shows in the software.
To activate angle reading, tap More-Setting and toggle activation switch
for angle measurement.
Select corresponding angle based on device rotation direction as
illustrated below.
To view sensor status and change data update rate, tap device name
WLRFXXX in the main page.
Antenna
Charge Port – connect to USB power adapter via provided USB to barrel
cable to charge WLRF
On/Off Button – press to turn WLRF on/off
Tri-Color LED
– Device is on
– Device is in charge
– Device is fully charged
Laser Sensor
Mounting Hole – remove the cap screw and connect to a tripod or other
mounting system with 1/4-20 thread
1
5
4
1
3
2
6
2
3
4
5
6
Angle 1 Angle 2 Angle 3