This curriculum vitae summarizes the educational and professional experience of Mohammad Mahbubur Rahman. It details his educational background including a PhD in Electronic Engineering and various Masters degrees. It also outlines his extensive work experience in research roles, including his current position as a Research Fellow at the Polish Academy of Science. The CV provides a lengthy list of Rahman's publications, awards, teaching experience, areas of research expertise, and funding sources for his work.
1. Curriculum Vitae Mohammad Mahbubur Rahman Page 1 of 10
CURRICULUM VITAE
MOHAMMAD MAHBUBUR RAHMAN
CONTACT Ul Plocka 8/150, +48793276411
INFORMATION Warsaw-01231, mur2ster@gmail.com
Poland http://www.researchgate.net/profile
/Mohammad_Mahbubur_Rahman3
/?ev=prf_highl
EDUCATION PhD in Electronic Engineering 2013
University Rovira I Virgili, Spain.
M.Sc. in Electronic Engineering 2010
University Rovira I Virgili, Spain.
M.Sc. in Nanoscale Science and Technology 2007
Chalmers University of Technology, Sweden.
B.Sc. in Physics
2004
Jahangirnagar University, Bangladesh.
CERTIFICATION
AND LICENSE
Clean room certificate in MC2 of Chalmers University of
Technology, Sweden.
2007
License of AVAC for metal deposition, Plasma etching from MC2 of
Chalmers University of Technology, Sweden.
2007
License of ESEM, AFM for full access of thin film characterization,
University Rovira I Virgili, Spain.
2010
License of PL, Perkinelmer, Sputtering, University Rovira I Virgili,
Spain.
2010-2013
License of Ellipsometer in École Polytechnique, France. 2011
License of Microfluidic Measurement in the University of Adelaide,
Australia.
2013
2. Curriculum Vitae Mohammad Mahbubur Rahman Page 2 of 10
EMPLOYMENT Research Fellow (Assistant Professor)
Polish Academy of Science
Warsaw, Poland.
Principal of Bangladesh Technical College
Assistant Professor, Department of Electronic and
Telecommunication Engineering
Bangladesh Technical College, Jessore, Bangladesh.
Postdoctoral Researcher Fellow
Department of Mechanical Engineering
University of Malaya, Malaysia.
Predoctoral Researcher (PhD student)
Department of Electronic Engineering
University Rovira I Virgili, Spain.
2016- Till date
2016- 2016
2014-2015
2009-2013
Visiting Research Associate
The School of Chemical Engineering
The University of Adelaide, Australia.
2013
Visiting Research Associate
Intec
The Universitadad Nacional de Litoral, Argentina.
2013
Junior Researcher
Electro physics and photonics group,
Gothenburg University, Sweden.
2007-2009
PUBLICATIONS Refereed Journal Articles 2009-Present
Tushar Kumeria, Abel Santos, Mohammad Mahbubur Rahman,
Josep Ferré-Borrull, Lluís F. Marsal and Dusan Losic, ‘Advanced
Structural Engineering of Nanoporous Photonic Structures:
Tailoring Nanopore Architecture to Enhance Sensing Properties’,
ACS Photonics, 1, 1298-1306, I.F: 5.4, C-15.
2014
Tushar Kumeria , M. Mahbubur Rahman , Abel Santos , Josep
Ferre-Borrull , Lluis F. Marsal , and Dusan Losic, ‘Structural and
Optical Nanoengineering of Nanoporous Anodic Alumina Rugate
Filters for Real-Time and Label-Free Biosensing Applications’, ACS
Analytical Chemistry, 86, 1837−1844, I.F: 5.9, C-36.
2014
3. Curriculum Vitae Mohammad Mahbubur Rahman Page 3 of 10
Tushar Kumeria, Mohammad Mahbubur Rahman, Abel Santos,
Josep Ferré-Borrull, Lluís F. Marsal and Dusan Losic; ‘Nanoporous
Anodic Alumina Rugate Filters for Real-Time and Label-Free
Sensing of Ionic Mercury: Toward Environmental Point-of-Analysis
Systems’, ACS Appl. Mater. Interfaces, 6,12971−12978, I.F: 7.1,C-
25.
2014
Josep Ferré-Borrull, Mohammad Mahbubur Rahman, Josep
Pallarès, Lluis F. Marsal; ‘Tuning Nanoporous Anodic Alumina
Distributed Bragg Reflectors with the Number of Anodization
Cycles and the Anodization Temperature’, Nanoscale Res Lett, 9,
416, I.F: 2.6, C-4.
2014
M. M. Rahman, Lluis F. Marsal, Josep Pallarès, Josep Ferré-
Borrull; ‘Tuning photonic stop bands of nanoporous anodic
alumina-based distributed Bragg reflectors by pore widening’, ACS
Applied Materials and Interface, 5, 13375−13381, I.F: 7.1, C-22.
2013
Mohammad Mahbubur Rahman, Enric Garcia-Caurel, Abel
Santos, Lluis F Marsal, Josep Pallarès and Josep Ferré-Borrull;
‘Effect of the anodization voltage on the pore-widening rate of
nanoporous anodic alumina’, Nanoscale Res Lett, 7, 474, I.F: 2.6, C-
23.
2012
Abel Santos, Maria Alba, Mahbubur M Rahman, Pilar Formentín,
Josep Ferré-Borrull, Josep Pallarès and Lluis F Marsal; ‘Structural
tuning of photoluminescence in nanoporous anodic alumina by
hard anodization in oxalic and malonic acids’, Nanoscale Res Lett,
7, 228, I.F: 2.6, C-27.
2012
Mohammad Mahbubur Rahman, Josep Ferré-Borrull, Josep
Pallarès, Lluis F. Marsal, ‘Photonic stop bands of two-dimensional
quasi-random structures based on macroporous silicon’, Phys Status
Solidi C, 8, 1066–1070, I.F: 1.5, C-6.
2011
P. Klason, M. M. Rahman, Q.-H. Hu, O. Nur, R. Turan, and M.
Willander; 'Fabrication and characterization of p-Si/n-ZnO
heterostructured junctions', Microelectronics Journal, 40, 706-710,
I.F: 1, C-54.
2009
PUBLICATIONS Refereed Conference Posters / Abstracts
E. Elizalde, M.M. Rahman, R. Urteaga, C.A. Berli, R.R. Koropecki,
Optofluidic study of the pore widening in nanoporous alumina
membranes, Anales Afa Vol. 25 N.4 (189-193)
2014
4. Curriculum Vitae Mohammad Mahbubur Rahman Page 4 of 10
Santos, A. Kumeria, T. Rahman, M. M. Ferré-Borrull, J. Marsal,
L.F. and Losic, D. : Structural engineering of nanoporous anodic
alumina rugate filters for optical sensing of glucose: Perspectives
and limitations. Biosensors 2014, Melbourne-Australia,
BIOS2014_0166 (Abstract and Poster).
Kumeria, T. Santos, A. Rahman, M. M. Ferré-Borrull, J. Marsal, L.F. and
Losic, D.: Nanoporous anodic alumina rugate filters for detection of ionic
mercury. Biosensors 2014, Melbourne-Australia, BIOS2014_0162
(Abstract and Poster).
Josep Ferre-Borrull, Mohammad Mahbubur Rahman, Lluis F.
Marsal, Josep Pallarès, ‘Effect of the number of cycles and of the
anodization temperature on Nanoporous Anodic Alumina cyclic
anodization’ PSST2014 (poster).
Mohammad Mahbubur Rahman, Gerard Macias Sotuela, Maria
Alba, Lluís F. Marsal, Josep Pallarès and Josep Ferré-Borrull,
‘Nanoporous anodic alumina produced with variable voltages ’,
CEN2012 (oral).
2014
2014
2014
2012
Mohammad Mahbubur Rahman, Gerard Macias Sotuela, Maria
Alba, Lluís F. Marsal, Josep Pallarès and Josep Ferré-Borrull, ‘3D
nanostruring of nanoporous anodic alumina for photonic
applications’, TNT2012 (poster).
2012
Josep Ferré-Borrull, Mohammad Mahbubur Rahman, Pedro
Granero, Pilar Formentin, Josep Pallarès and Lluis F. Marsal,
‘Photonic Properties and Applications of Nanoporous Anodic
Alumina’, ICOOPMA2012 (oral).
2012
Josep Ferré-Borrull, Enric Garcia-Caurel, Mohammad Mahbubur
Rahman, Josep Pallarès, Lluis F. Marsal; ‘Polarimetric
Characterization of Porous Anodic Alumina quasi-Random
Nanostructures’, WSE2012 (poster).
2012
Josep Ferré-Borrull, Enric Garcia-Caurel, Mohammad Mahbubur
Rahman, Josep Pallarès, Lluis F. Marsal; ‘Modeling Of Reflectance
And Ellipsometry Spectra Of Nanoporous Anodic Alumina’,
PSST2012 (oral).
2012
Mohammad Mahbubur Rahman, Josep Ferré-Borrull, Josep
Pallarès and Lluís F. Marsal; ‘Numerical Simualtion of Nanoporous
Anodic Alumina-based Metallo-dielectric Quasi-random Structures’,
CDE2011 (poster).
2011
5. Curriculum Vitae Mohammad Mahbubur Rahman Page 5 of 10
Josep Ferré-Borrul, Mohammad Mahbubur Rahman, Abel
Santos, Pilar Formentín, Josep Pallarès, Lluis F.
Marsal;’Nanostructured silicon surfaces by self-assembled
nanoporous anodic alumina for photonic applications’,
IMAGINENANO2011 (oral).
2011
Mohammad Mahbubur Rahman, Josep Ferré-Borrull, Josep
Pallarès and Lluís F. Marsal; ‘Photonic properties of quasi-random
structures based on macroporous silicon’, EMRS2010 (poster).
2010
Mohammad Mahbubur Rahman, Ivan Maksymov, Lluís F.
Marsal, Josep Pallarès and Josep Ferré-Borrull; ‘FDTD study of
quasi-random photonic structures obtained by electrochemical
etching’, CEN2010 (poster).
2010
M. M. Rahman, P. Klason, Naveed H.A. and M. Willander;
'Fabrication and Characterization of white light emitting diodes
based on ZnO nano-rods grown on p-Si' NANO apos 2008. 8th
IEEE conference (oral).
2008
P. Klason, P. Steegstra, O. Nur, Q-H. Hu, M. M. Rahman, M.
Willander, and R. Turan; 'Characterization of white light emitting
diodes based on ZnO nanostructures grown on p-Si'. ENS2007
(oral).
2007
PUBLICATIONS Published Book
Mohammad Mahbubur Rahman, ‘Development of Technologies
for the Obtention of Photonic Quasi-Random Nanostructures
based on Nanoporous Anodic Alumina’ (Doctoral Thesis, URV-
2013, Tarragona, Spain).
Polish Academy of Science Fellowship, PAN, Poland
HIR Postdoctoral Research Grant, University of Malaya, Malaysia
Fellowship for International mobility, The School of Chemical
Engineering, The University of Adelaide, Australia.
2013
2016
2014
2013
AWARDS &
HONORS
Fellowship for International mobility, Intec, Universidad Nacional
del Litoral-CONICET, Argentina.
2013
Fellowship for mobility to obtain the International Doctorate
Award, Universitat Rovira i Virgili, Departament d'Enginyeria
Electrònica, Elèctrica i Automàtica, Spain.
2013
Rovira i Virgili Predoctoral research grant, Universitat Rovira i 2009-2013
6. Curriculum Vitae Mohammad Mahbubur Rahman Page 6 of 10
Virgili, Departament d'Enginyeria Electrònica, Elèctrica i
Automàtica, Spain.
Best Poster award in the work shop of DEEEA. 2010
Rovira i Virgili postgraduate scholarship for international students,
Universitat Rovira i Virgili, Departament d'Enginyeria Electrònica,
Elèctrica i Automàtica, Tarragona, Spain.
2009-2010
TEACHING
EXPERIENCE
RESEARCH
EXPERIENCE
Technical scholarship, Department of Physics, Jahangirnagar
University, Bangladesh.
Title: Applied Mechanics
1998-2003
2006-Present
2016
Institute: Bangladesh Technical College, Jessore
Title: Semiconductor Devices
Institute: Bangladesh Technical College, Jessore
Title: Electronics
Institute: Bangladesh Technical College, Jessore
Title: Supervisor of Research Students
Institute: University of Malaya, Malaysia
Title: Semiconductor Device Physics
Institute: Chalmers University of Technology, Sweden
2016
2016
2014-2015
2006
PhD in Electronic Engineering 2006-Present
Title: Development of Technologies for the Obtention of Photonic
Quasi-Random Nanostructures based on Nanoporous Anodic
Alumina.
Expertise: Fabrication, modelling and characterization of
Nanoporous material for the photonic application.
Funding: Department of DEEEA, Universitat Rovira I Virgili.
2009-2013
Title: Development of an ultrasensitive optical sensor for
biomedical applications.
Expertise: Real time monitoring of the flow of ionic mercury
through the Nanoporous Anodic Alumina (NAA) based rugate filter
using RfS spectrometer.
Funding: Department of Chemical Engineering, The University of
Adelaide, Australia.
2013
Title: Characterization of NAA structures using optofluidic
method.
Expertise: Characterization of different NAA structures using
2013
7. Curriculum Vitae Mohammad Mahbubur Rahman Page 7 of 10
optofluidic method.
Funding: Intec, The Universitadad Nacional de Litoral, Argentina.
Title: Development of technologies for obtaining the Nanoporous
Anodic Alumina based quasi-random structures for photonic
application.
Expertise: Fabrication, modeling and photonic characterization of
NAA structures. Fabricating in electrochemical process; different
NAA structures modeling in Matlab, deltapsi, NKD;
characterization in AFM, ESEM, perkinelmer, monochrometor and
metal deposition in sputtering and thermal evaporator and carbon
nanotube deposition inside NAA membrane using CVD technique.
Funding: University Rovira I Virgili (URV), Spain.
2009-2013
Title: Fabrication and characterization of ZnO nanorod based
LED.
Expertise: Different ZnO structures, Plasma etching, Spin coating,
work in cleanroom environment.
Funding: Electrophysics and photonic group, Gothenburg
University, Sweden.
2007-2009
Title: Thickness and porosity estimation of NAA structures.
Expertise: Ellipsometric measurements and Deltapsi.
Funding: École Polytechnique, France.
2010
RESEARCH
EXPERIENCE
M.Sc. in Electronic Engineering 2009-2010
Title: Introduction to research.
Expertise: Finding research papers, most cited journals of interest.
Funding: University Rovira I Virgili, Spain.
2009
Title: Semiconductor devices.
Expertise: Modeling different semiconductor devices using Atlas.
Funding: University Rovira I Virgili, Spain.
2009
Title: Optoelectronic and Photonic devices.
Expertise: Optoelectronic device fabrication and characterization.
Funding: University Rovira I Virgili, Spain.
M.Sc. in Nanoscale Science and Technology
Title: Microelectronic Project
Expertise: Fabrication of Ferroelectronic Varactor.
Funding: Chalmers University of Technology, Sweden.
Title: Nanoscale Science.
Expertise: Nanotechnology, Nanomaterials and Quantum
2010
2005-2007
2005
2005
RESEARCH
EXPERIENCE
8. Curriculum Vitae Mohammad Mahbubur Rahman Page 8 of 10
Engineering.
Funding: Chalmers University of Technology, Sweden.
Title: Nanobio Science and information processing.
Expertise: DNA computing.
Funding: Chalmers University of Technology, Sweden.
2006
Title: Modeling and Fabrication of micro/nano devices
Expertise: Modeling and Fabrication of nano devices and Thin film
technology.
Funding: Chalmers University of Technology, Sweden.
2006
SERVICE TO
PROFESSION
Microfluidic Combinatorial On Demand Systems
Principal at Bangladesh Technical College, Bangladesh
Lectures on the electrochemical process of anodization, Argentina
2016
2016
2013
Lectures on the fabrication of multi-layer NAA, Australia. 2013
SERVICE TO
DEPARTMENT
/ UNIVERSITY
Deliver lectures on Different Subjects as an Assistant Professor of
Bangladesh Technical College, Bangladesh
Transfer knowledge to the group members regarding the state of
the art of technology at URV, Spain.
2016
2010-2013
Demonstration of the PL, Perkinelmer, ESEM and AFM
characterization technique at URV, Spain.
2010-2013
RESEARCH
INTERESTS
Fabrication of metal oxide semiconductor based LED and Laser 2007-present
Nanobio application of Metaloxide 2010-present
Microfluidic Microfluidic Combinatorial On Demand Systems 2010-Present
Structural Engineering surface chemistry functionalization of
nanostructures
2013-Present
Optical bio-sensing for clinical and industrial applications 2013-Present
Smart drug delivery from nanocarriers and surface coatings for
biomedical applications
2013-Present
TECHNICAL
EXPERTISE
Microfluidic System: Droplet Based Microfluidic, Continuous
Microfluidic system.
AVAC/Sputtering/ Thermal Evaporator: Metal deposition on
different substrate.
2013-Present
2007-Present
ESEM/TEM/AFM: Sample imaging (cross-section and surface) 2006-Present
9. Curriculum Vitae Mohammad Mahbubur Rahman Page 9 of 10
and roughness estimation.
PL/XRD: Optical characterization of material. 2010-Present
Perkinelmer/FTIR: Transmittance and reflectance measurement. 2013-Present
Ellipsometer: For thickness and refractive index estimation. 2010-2013
RFS spectrometer: Real time monitoring of microfluidic
measurement.
2013-Present
Plasma etching: Etching photoresist for device fabrication. 2007
Spin Coating: Depositing photoresist on different substrate. 2007
CVD: Deposition of Carbon nanotube (CNT) in NAA membrane.
Soft Lithography: For the fabrication of temperature controller.
2013
2016
EXTRA-
CURRICULAR
SERVICES
President of Bangladesh Association, Chalmers University of
Technology.
2008-2009
Secretary of Bangladesh Association, Chalmers University of
Technology
2007-2008
Organized as a team leader the Bengali New year (Pohela Boishakh)
celebration, Chalmers University of Technology.
2008
President of Narayanganj Student welfare association, Jahangirnagar
University, Bangladesh.
2002-2003
Vice President of Jahangirnagar University Physical Society. 2002-2003
Organized as a team leader the indoor games of Jahangirnagar
Unversity Physical society.
2002
PROFESSIONAL
MEMBERSHIPS
Bangladesh Physical Society 2004
Scientific Advisor of Wiley 2011-Present
SOFTWARE&
PROGRAMMING
SKILLS
Matlab/Octave: Simulation of photonic stop band of quasi-random
structure.
2009-2010
Labview: Develop and manipulate the control of microfluidic system to
generate droplets and the electrochemical process of anodization.
2009-Present
Meep: FDTD simulation of different photonic structures. 2009-2010
Origin/ Grapher/ Gnuplot: Processing of different spectra. 2009-present
NKD/ Deltapsi: Modeling the porous structures to estimate
thickness and porosity of porous structures.
2009-present
Latex: Preparing documentations. 2013-present
10. Curriculum Vitae Mohammad Mahbubur Rahman Page 10 of 10
TransienstaC: Programming for molecular dynamic simulation. 2006-2007
Sketchup8: Designing 3D models. 2013-present
REFERENCES
ImageJ: Image processing. 2010-present
Dr. Josep Ferré-Borrull, My PhD Supervisor, DEEEA, URV, +34
977 559 632, josep.ferre@urv.cat.
2009-2013
Prof. Roberto Koropecki, Supervisor in Argentina, Grupo Fisica de
Materiales, INTEC (CONICET-UNL), +543424559174,
rkoro@intec.unl.edu.ar.
2013
Dr Abel Santos Alejandro, Co-Supervisor in Australia, The University
of Adelaide, School of Chemical Engineering, +61 8 8313 1535,
abel.santos@adelaide.edu.au.
2013