An overview of firesafe and gas, smoke and watertight solutions for pipe and cable penetrations in building & construction and Industrial installations

1. BEELE Engineering products and systems are developed explicitly for a service life and functionality of more than
25 years, as has now been demonstrated in many installations. The products are tested to meet the highest con-
ceivable fire and mechanical loads. Not only do they easily withstand oil fires, explosions, tsunamis, shocks and
vibrations, they also offer protection against corrosion, temperature differences, and adverse climatological effects.
Taking all these threatening aspects into account, it may be obvious that just one system or one rubber or plastic
grade will not be enough to optimize protective system technology. A wide variety of systems and technologies
has been developed over the years. And are still being developed.
WE CARE is our passion - WE SOLVE is our missionKNOWLEDGE TRANSFER, EDUCATION AND TRAINING
HI-TECH RUBBER TECHNOLOGY
ADVANCED R&D AND TESTING FACILITIES
ULTRA-MODERN FACTORIES
MADE IN AALTEN (NL)
FIRE SAFE AND/OR GAS AND WATERTIGHT SEALING
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS

2. SAFETY
SEALING
SYSTEMS
NOFIRNO®
system technology to withstand 240 minutes fire exposure
in minimum 100 mm thick walls and 150 mm thick floors - Water and gas tight
Sleeve - fill - seal - that’s it
NOFIRNO®
rubber/sealant: drinking water approved
NOFIRNO®
: no aging, >20 years service life, temperature range -50 0
C up to +180 0
C
0620
Water tight and air tight
sealing systems for cable
transits
KIWA 90683-01
ETA
13/0153
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR MULTI-CABLE TRANSITS

3. SAFETY
SEALING
SYSTEMS
NOFIRNO®
system technology: ease of ducting extra cables
No disassembling of the sealing system - Substantial lower maintenance costs
Punch a hole - remove sleeves - duct cable(s) - sleeve - seal - that’s it
No impact on fire safety, water and gas tightness
Fresh NOFIRNO®
sealant adheres on the existing NOFIRNO®
sealant
0620
Water tight and air tight
sealing systems for cable
transits
KIWA 90683-01
ETA
13/0153
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
EASE OF ADDING EXTRA CABLES IN MULTI-CABLE TRANSITS

4. SAFETY
SEALING
SYSTEMS
NOFIRNO®
system technology for application in sandwich walls
HR fire safe plastic conduit sleeves and frames with loose flanges
Flanges fixed to the wall with NOFIRNO®
sealant
Successfully fire tested in minimum 100 mm thick walls
Conduit sleeves max. 250 mm; conduit frames max. 150x300 mm
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR MULTI-CABLE TRANSITS

5. LEAXEAL®
duct sealing technology to get it tight and to keep rodents out
AQUASTOP®
/NOFIRNO®
to seal leaking conduits even when water is running in
AQUASTOP®
ductile rubber not needed when installing under dry conditions
NOFIRNO®
filler sleeves, compressed AQUASTOP®
, drying,
NOFIRNO®
sealant - that’s all
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR LEAKING CONDUITS
SAFETY
SEALING
SYSTEMS

6. NOFIRNO®
applied in split CSD®
frames to seal leaking conduits
with none or insufficient access
CSD®
modular split frame (ABS or HR plastic) assembled around the cable set
NOFIRNO®
gasket placed between the frame and the wall
NOFIRNO®
sleeves and sealant - that’s all
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR LEAKING CONDUITS
SAFETY
SEALING
SYSTEMS

7. CONTROFIL
MULTI-CABLE TRANSITS
CONTROFIL®
preventing overfilling and enabling neat cable routing
of fire safe, gas and watertight multi-cable transits
Blocks are passage modules, not sealing blocks to be compressed
CONTROFIL®
multi-window transits tested for 4 hour fire exposure in
minimum 100 mm thick walls and 150 mm thick floors (E 240)
Water tight and air tight
sealing systems for cable
transits
ETA
applied
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR MULTI-CABLE TRANSITS
SAFETY
SEALING
SYSTEMS

8. FIRSTO®
mudular casings filled with fire safe ACTIFOAM®
-sheets
pre-slit and non-slit - fire safe sealing solution (UL listed)
System allows in a simple manner regular changes of the cable sets
Remove cover plate and some ACTIFOAM®
-sheets, add cable set,
replace ACTIFOAM®
and cover plate - that’s all!
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR MULTI-CABLE TRANSITS
SAFETY
SEALING
SYSTEMS

9. NOFIRNO®
sealing system for gaps up to 300 mm wide with NOFIRNO®
sealant at both sides - fire tested 240 minutes EI 240/E 240
Can be combined with ACTIFOAM®
fo one sided installation
Sealing system is “walking proof” when properly installed
Tested according to EN1366-4:2010
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR LINEAR JOINT/GAPS
SAFETY
SEALING
SYSTEMS
ETA
applied

10. Layered ACTIFOAM®
/ULTRA sandwiches (up to 135 mm height) covered with
NOFIRNO®
sealant for fire rated sealing of gaps in constructions (tunnels)
ACTIFOAM®
/ULTRA gap seal exposed for 2 hours to 1250 0
C
No smoke release; only 12 0
C temperature rise at the unexposed side
ACTIFOAM®
is a fire safe, closed cellular foam rubber - high thermal insulation value
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR LINEAR JOINT/GAPS
SAFETY
SEALING
SYSTEMS

11. CSD®
modular casting system adjustable to the width of the form work
Collars of the system act as water barrier
Inlets exactly fitting for the SLIPSIL®
plugs
Casting system also available in the fire retardant HR quality
Maximum sizes up to 200 mm blue ABS and 250 mm black HR
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
MODULAR EMBEDDED PIPE SYSTEM FOR FITTING CONDUITS
SAFETY
SEALING
SYSTEMS

12. SLIPSIL®
sealing plugs - 4 decades proven water and gas tight ducting
European Technical Approval for fire rated pipe penetrations in
HR conduit sleeves or in drilled holes.
Fire safe, gas and watertight - Temperature range -50 0
C up to +180 0
C (also HR)
SLIPSIL®
sealing plugs are drinking water certified
0620
Water tight and air tight
sealing systems for pipe
transits
KIWA 90683-01
ETA
13/0152
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR PIPE AND CABLE TRANSITS
SAFETY
SEALING
SYSTEMS

13. SLIPSIL®
sealing plugs in SLIPSIL®
flanged pipes with NOFIRNO®
gaskets
Conduit sleeves made from steel with anti-corrosion coating
or stainless steel 1.4571 passivated or alternative from black HR plastic
SLIPSIL®
sealing plugs and NOFIRNO®
gaskets are
drinking water certified
Water tight and air tight
sealing systems for pipe
transits
KIWA 90683-01
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR PIPE AND CABLE TRANSITS
SAFETY
SEALING
SYSTEMS

14. Multi-SLIPSIL®
plugs in CSD®
modular casting system or drilled holes
Watertight sealing of cable and pipe entries in concrete pits/manholes
Multi-sealing plugs available for ducting
2, 3, 4 or 5 same diameter cables or pipes
Lubricate (really a must) and push - that’s all
KIWA 90683-01
Water tight and air tight
sealing systems for cable
transits
Water tight and air tight
sealing systems for pipe
transits
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR MULTI-PIPE/CABLE TRANSITS
SAFETY
SEALING
SYSTEMS

15. SLIPSIL®
sealing plugs with MPP multi-passage modules
MPP modules made from HMPE in various configurations
Passage openings sealed with DYNATITE®
sealing plugs
Optimized for later extensions - removing blind plugs for extra cables
Gas and watertight sealing system
DYNATITE
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR MULTI-PIPE/CABLE TRANSITS
SAFETY
SEALING
SYSTEMS

16. GLANDMOD®
modules - CET-A-SIL®
sealing plugs - NOFIRNO®
gaskets
The alternative for glands used for cable entries in electrical cabinets
water and gas tight - blast proof - IP rated
Modules made of HMPE plastic or aluminum - various configurations
Modules also available in fire resistant NOFIRNO®
rubber
Water tight and air tight
sealing systems for cable
transits
CET-A-SIL
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR MULTI-CABLE CABINET ENTRIES
SAFETY
SEALING
SYSTEMS

17. DYNATITE®
sealing plugs in DYNATITE®
conduit sleeves
For applications where a high degree of (instantaneous) tightness is
required - self compressive system technology
Easily withstands shock pressure loads of up to 15 bar
Conduit sleeves capacitor discharge welded - no crevice corrosion DYNATITE
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR EXTREME PRESSURE RATINGS
SAFETY
SEALING
SYSTEMS
KIWA 90683-01
Water tight and air tight
sealing systems for pipe
transits

18. Water tight and air tight
sealing systems for pipe
transits
NOFIRNO®
system technology to withstand 120 minutes fire exposure
in minimum 150 mm thick partitions (E 120) - water and gas tight
Sleeve - fill - seal - that’s it
European Technical Approval for single pipe transits
Tested for axial and radial movements - Temperature range -50 0
C up to +180 0
C
0620
KIWA 90683-01
ETA
13/0153
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR SINGLE & MULTI-PIPE TRANSITS
SAFETY
SEALING
SYSTEMS

19. NOFIRNO®
sealing system for watertight and fire safe sealing of
transits in bund walls around storage facilities of flammable liquids
PGS 29 risk evaluation by KIWA Netherlands
Successfully tested for two hours Jet Fire exposure according to
ISO 22899-2 and Hydrocarbon Fires
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING SYSTEMS FOR TRANSITS IN BUND WALLS
SAFETY
SEALING
SYSTEMS

20. CRUSHER®
sleeves in HR conduit sleeves or drilled holes
Fire safe ducting of plastic pipes in minimum 150 mm thick partitions
EN 1366-3:2009 - Classification EI 240 / E 240
C-FIT crushers are pushed in the wall or floor opening
Fire stopping systems at both sides of the wall not needed
0620
ETA
13/0941
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
FIRE SAFE SEALING SYSTEMS FOR PLASTIC PIPE TRANSITS
SAFETY
SEALING
SYSTEMS

21. NOFIRNO®
sealants are used in various sealing systems
The sealant is water repellent and forms a ceramic char when exposed to fires
NOFIRNO®
sealant has outstanding properties to cope with axial and radial movements
UV and weathering resistant - no aging - service temperature -50 up to +180 0
C
NOFIRNO®
sealant is drinking water certified
NOFIRNO®
is absolutely HALOGEN
FREE with zero VOC (volatiles organic
compounds) according to TÜV reports
89206405-01 and 89207423-01.
Furthermore NOFIRNO®
has a low smoke
index and a high oxygen index
(ISO 4589-2: 1996), and low flame
spread characteristics according to IMO
Resolution A.653(16).
NOFIRNO®
is a paste-like compound
which is simple to use. NOFIRNO®
has a
balanced viscosity and can be applied
overhead.
KIWA 90683-01
Water tight and air tight
sealing systems for cable
transits
Water tight and air tight
sealing systems for pipe
transits
NOFIRNO®
sealant
optimum performance to seal
against water, gas, dust and fire
0062
0620
KIWA 90683-01
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
HIGH PERFORMANCE SEALANTS WITH LONG SERVICEABILITY
SAFETY
SEALING
SYSTEMS

22. Various sizes and shapes of NOFIRNO®
standard gaskets with unique
profiling for highest tightness ratings (6-15 bar) with lowest tightening
forces (6-8 Nm) - durable tightness - fire safe
Gasket sheets 1000x1000 mm, thickness 5 or 10 mm
to cut gaskets to size and shapes
KIWA 90683-01
Water tight and air tight
sealing systems for cable
transits
Water tight and air tight
sealing systems for pipe
transits
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
HIGH PERFORMANCE, PROFILED SEALING GASKETS
SAFETY
SEALING
SYSTEMS

23. SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
FIRE SAFE, GAS TIGHT GASKETS FOR FIRE DAMPERS
Round, square and rectangular shapes of NOFIRNO®
gaskets with unique
profiling for instance for fire dampers
Fire safe, gas and watertight - Temperature range -50 0
C up to +180 0
C
Made of UV, Ozone and weathering resistant NOFIRNO®
rubber
No re-tightening of bolts from time to time needed
SAFETY
SEALING
SYSTEMS

24. FISSIC®
coating available in 1 - 55 liter drums
Optimum performance to protect against corrosion and fire
UV and salt water resistant - water impermeable
Can be brushed or airless sprayed - adheres even on silicones
No solvents
FISSIC®
is a fire retardant coating on the basis of an APEO-free
water-based polymer emulsion without the addition of
VOC containing solvents
FISSIC®
has been tested successfully on flame spread charac-
teristics and toxicity and is classed as ”not capable of
producing excessive quantity of smoke or toxic product”.
MED certificate 39278/A0 EC issued by Bureau Veritas
FISSIC®
is fire proof and salt water resistance (even after
fire). KIWA Netherlands report 20150421HN01
FISSIC®
is gas tight up to 30 mBar
FISSIC®
is water impermeable
KIWA Netherlands report 20160203TW01
FISSIC®
is resistant to diesel & petrol
KIWA Netherlands report 20160224TW01
FISSIC®
prevents “CUI - corrosion underneath insulation”
FISSIC®
successfully SBI tested according to EN 13823:2010
and ISO 1716 for A-class rating - A2-s1-d0
Non-combustible, no smoke/flames, no droplets
FISSIC®
adhesion 3.84 MPa according to ISO 4624:08-2003
KIWA Netherlands report P 10498a
FISSIC®
coating
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
FIRE PROOF ANTI-CORROSION COATING
SAFETY
SEALING
SYSTEMS

25. FYLLOFYS®
incombustible fiber free thermal insulation shells as an
alternative for mineral wool or ceramic fiber mats
Specially developed for fire rated pipe transits to cope with the
max. temperature rise of 180 0
C in case of fire (EN 1366-3:2009)
FISSIC®
coating applied offering a highly protective and reflective layer
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
FIBER FREE THERMAL INSULATION SHELLS AND SHEETS
SAFETY
SEALING
SYSTEMS

26. Fire Safe, Water and Gas
tight Sealing Systems
Shielding Properties:
91% - 99,9%
NOFIRNO®
sealing systems are applied in nuclear installations
for gas and watertight and fire stopping penetrations
Basic materials exposed to 200 kGy equaling a service life of 80 years
XATTAX®
technology for shielding properties
RADIATT®
shielding rubber developed for special applications
KIWA Covenant
K93662/01:
Shielding properties gamma
radiation XATTAX®
sealing
systems
KIWA Report
20160525HN/01:
Gamma irradiation resistance
of polymeric materials for
BEELE®
cable and pipe
sealing systems
XATTAX
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
RADIATION RESISTANT AND SHIELDING SYSTEMS
SAFETY
SEALING
SYSTEMS

27. This year (2017), construction of a new 45,000 m² campus in Aalten (the Netherlands) will begin, not only to facilitate
development and transfer knowledge and information, but also to bundle expertise in order to raise the entire market to a
higher level. The new Sealing Valley complex will include multimedia equipped lecture halls and classrooms, state-of-the art
R&D and testing laboratories, as well as a production facility. In the future, there will be a showroom where students and
visitors can experience simulated scenarios involving fire, water and other calamities in a safe environment.
The priority of Sealing Valley will be to train BEELE engineers so they can make their own contribution to the development
of our products and systems, and be able to disseminate their professional knowledge all over the world. Sealing Valley will
also benefit the general community by offering regular workshops on preventive safety. Organizations looking to learn about
fire safety and essential sealing methods for protection against water, gas, and natural disasters will be able to participate.
WE CARE is our passion - WE SOLVE is our missionKNOWLEDGE TRANSFER, EDUCATION AND TRAINING
CENTRE OF EXCELLENCE - COOPERATION WITH NOTIFIED BODIES - COOPERATION WITH SUPPLIERS
PARTNERSHIP WITH CUSTOMERS - WORKSHOPS/VIDEO CONFERENCING
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS
SEALING VALLEY AALTEN

28. BEELE Engineering bv
Beunkdijk 11 - 7122 NZ AALTEN - THE NETHERLANDS
Tel. 0543 461629 - Fax 0543 461786 - E-mail: info@beele.com
Websites: http://www.beele.com - www.fissiccoating.com - www.sealingvalley.com
SAFETY
SEALING
SYSTEMS
K N OW L E D G E T R A N S F E R , E D U C AT I O N A N D T R A I N I N G
FIRE SAFE AND/OR GAS AND WATERTIGHT SEALING
SOLUTIONS IN BUILDING AND INDUSTRIAL INSTALLATIONS