This is our second generation of Sanitary hex pipe hanger. These pipe hangers are designed specifically for use in Bio-Technology, Pharmaceutical, Food, Beverage, and Dairy areas. Having no exposed threads, no crevices and a geometry that facilitates drain ability and cleanability make these hangers ideal for use in hygienic areas. http://syntirocorp.com/

1. Syntiro Dynamics - 5033 Industrial Rd., Building 6, Farmingdale, NJ 07727-3947
T: 732-377-3307, F: 732-230-6695 sales@syntirocorp.com, www.syntirocorp.com
PROCESS HEX HANGER - FIGURE PHH
STAINLESS STEEL TUBE, SCHEDULE PIPE AND PVC COATED CONDUIT
1/2”Tube (0.50”) to 4”Pipe (4.5”)
SILICONE GROMMETS FEATURES:
• Circumference seals to pipe
• Seals to hardware frame
• Hardware Frame snaps into
Silicone Grommet reducing loose
pieces
• Zero entrapping crevices
• Drainable cleanable design
• Resistant to high temperatures
• Excellent electric insulator
• Color coded for line type
designation
FIGURE PHHTC
Threaded Coupling Connection
FIGURE PHHR
Rod Connection
Process
Hex
Hanger
Cleanliness, Safety &
Laborsaving“Uptime”Features
Antiquated
Hex
YES
Drainable Exterior Design
Limits puddling & contaminant collection
NO
YES
Wipe Down Cleanable
Maintenance uptime
NO
NO
Exposed Threads
Contaminant entrapment zone
YES
NO
Crevices
Contaminant entrapment zone
YES
NO
Two wrenches required for installment
Safety and efficiency concerns
YES
NO
Sharp Edges
Safety concerns & contaminant collector
YES
MATERIALS
• Silicone Insert/Grommet - 80 durometer
• Intermittent temperatures from -40F (-40C) to 320F (160C)
• Tube & Pipe - Anchors are Light Gray & Guides are Red
• PVC Coated Electrical Conduit - Light Gray
• Contact sales@syntirocorp.com for chemical resistance data
• Hardware - 304 & 316 Stainless Steel
APPLICATIONS:
• Cleanrooms and mechanical areas; not limited to: biotech
pharmaceutical, food processing, beverages, dairy, cosmetic
chemical, water treatment, and semi-conductor industries.
Carriage Bolt“CB”
2 CB’s per unit
Hardware Frame“HF”
(HF snaps into SG
reducing loose pieces)
Hardware Frame“HF”
Silicone Grommet“SG”
Silicone Grommet“SG”
Acorn Nut“AN”
2 AN’s per unit
3
FIGURE PHHW Weld Mount
CARRIAGE BOLT & ACORN NUT FEATURES:
• Drainable & Cleanable
• No exposed threads
• Carriage bolt locks into the Hard-
ware Frame’s square hole allowing
installer to use a single wrench
• The antiquated Entrapping Hex
requires two wrenches, increasing
safety concerns and installation time
• Carriage bolts are reversible, so
rounded drainable surface is always
on the hangers topside
NEW
PRODUCT
SYNTIRO DYNAMICS
U.S. Pat. No. US 9,038,968 B2

2. Syntiro Dynamics - 5033 Industrial Rd., Building 6, Farmingdale, NJ 07727-3946
T: 732-377-3307, F: 732-230-6695 sales@syntirocorp.com, www.syntirocorp.com
PROCESS HEX HANGER ASSEMBLY
FIGURE PHH
Hanger Assembly Part Number Builder
Process Hex Hanger Mount Line Size & Type * Hardware Material Insert Material Anchor / Guide
PHH
W Weld 1.5PVP 1 1/2”PVC Coated Pipe - Conduit 304 304 SS S Silicone A Anchor
TC Threaded Coupling 2.0T 2”Stainless Steel Tube 316 316 SS S Silicone G Guide
R Rod Mount 0.75P 3/4”Schedule Pipe
Ordering Examples:
PHHW1.5PVP316SA = PHH, Weld Mount, 1 1/2”PVC Coated Pipe Conduit 316, Silicone Light Gray, Anchor
PHHTC2.0T304SG = PHH, Threaded Coupling Mount, 2”Stainless Steel Tube, 304, Silicone Red, Guide
PHHR0.75P304SA = PHH, Rod Mount, 3/4”Schedule Pipe, 304, Silicone Light Gray, Anchor
Hardware Size
1 2 3 4
Line Size PN Code Line Size PN Code Line Size PN Code Line Size PN Code Line Size PN Code
Line OD
1/2”Tube 050T 1/2”Pipe 0.50P 3/4”Pipe 0.75P 1”Pipe 1.0P 1.25”PVP 1.25PVP
3/4”Tube 075T
1/2”PVP 0.50PVP
3/4”PVP 0.75PVP
1”PVP 1.0PVP 1 1/2”Pipe 1.5P
1”Tube 1.0T 1.5”Tube 1.5T 2.0”Tube 2.0T
Length 2.375 (60) 2.69 (68) 3.63 (92.2) 4.31 (110)
Width 0.75 (19) 1.0 (25.4) 1.0 (25.4) 1.0 (25.4)
Height 1.06 (27) 1.56 (40) 2.13 (54) 2.63 (66.7)
Hang Nut Height 0.47 (12) 0.47 (12) 0.47 (12) 0.47 (12)
Thread ** 3/8”-16 (M10) 3/8”-16 (M10) 3/8”-16 (M10) 1/2”-13 (M12)
Hardware Gauge 11 Gauge - 0.125” 11 Gauge - 0.125” 11 Gauge - 0.125” 11 Gauge - 0.125”
Lbs. (g) 0.28 (125) 0.30 (136) 0.46 (210) 0.58 (261)
Hardware Size
5 6 7 8 9
Line Size PN Code Line Size PN Code Line Size PN Code Line Size PN Code Line Size PN Code
Line OD
1 1/2”PVP 1.5PVP 2”PVP 2.0PVP 3”Pipe 3.0P
4”Tube 4.0T 4”Pipe 4.0P2”Pipe 2.0P 2 1/2”Pipe 2.5P
3”PVP 3.0PVP
2 1/2”Tube 2.5T 3”Tube 3.0T
Length 4.78 (124) 5.38 (137) 6.0 (152) 6.63 (168) 7.50 (191)
Width 1.0 (25.4) 1.0 (25.4) 1.00 (25.4) 1.0 (25.4) 1.0 (25.4)
Height 3.13 (79) 3.63 (92) 4.25 (108) 4.63 (117) 5.625 (143)
Hang Nut Height 0.59 (15) 0.59 (15) 0.59 (15) 0.75 (19) 0.88 (22)
Thread ** 1/2”-13 (M12) 1/2”-13 (M12) 1/2”-13 (M12) 5/8“-11 (M16) 5/8”-11 (M16)
Hardware Gauge 8 Gauge - 0.1719” 8 Gauge - 0.1719” 8 Gauge - 0.1719” 7 Gauge - 0.1875” 7 Gauge - 0.1875”
Lbs. (g) 0.61 (275) 0.66 (301) 0.69 (312) 0.74 (337) 0.76 (346)
** Hanger’s threads match MSS Pipe 69’s table 4’s recommended minimum rod diameter
* Refer to“PN Code”on the below price chart
4
U.S. Pat. No. US 9,038,968 B2
SYNTIRO DYNAMICS