The RELINK Continuous Power Supply Unit is a very effective Energy Storage system, available in the market for residential installations.

1. RLS35
CONTINUOUS POWER SUPPLY (CPS)
© 2015 RELINK limted. All rights reserved. All trademarks or brands in this document are registered by their respective owner.
The domestic RELINK Off Grid Continuous Power Supply
(CPS) has the capability to store energy generated by solar
or wind power or capture off peak power for later use and
better allocation. With RELINK CPS energy storage the
householder can optimize the energy consumption or
increase the self-consumption from solar source up to 75%
at very reasonable price.
RELINK RLES35 is all-in-one system integrating the charger
inverter and high density lithium batteries (LiFePO4
).
The batteries are rack mount trays easy to assemble or
dissemble. The system is easily expandable in terms of
rated power and storage capacity ranging from 2.5 kWh
RLES35-02 up to 15 kWh the RLES35-12. The RLES35 can be
connected both in a single-phase or three-phase systems.
The RELINK Energy Storage in combination with our grid-
tied microverters RES300HV allows the end-user to have
a silent and renewable energy back-up generator never
injecting energy in to the public grid. The CPU is specially
driving the micro-inverters, managing the stored power and
eventually, if battery are fully charged, is reducing the micro-
inverter power output avoiding energy injection into the grid
system.
EASY PERFORMING SAFE
• Simplified installation
• Flexible configuration
• Suitable for 3-ph and 1-ph systems
• Expandable capacity
• Battery tryes interchangable
• Web monitoring
• Grid-tied PV inverters compatible
• Maximized Energy Harvest
• LiFePO4
• High Density Batteries
• Compact size
• High efficiency
• Battery cells approved
• Impoved safety
• Low DC current

2. RLS35
CONTINUOUS POWER SUPPLY (CPS)
© 2015 RELINK limted. All rights reserved. All trademarks or brands in this document are registered by their respective owner.
Technical Specification Table RLS35
AC INPUT
Nominal grid voltage 230 V
Operation grid voltage range 195 V ... 265 V
Maximum input AC current 17.4 A
Maximum input AC power 4000 VA
Maximum input AC current 17.4 A
Power Factor > 0.90
AC input protection 30 A fuse - overvoltage - undervoltage - overtemperature
AC OUTPUT
Nominal output voltage 230 V ± 5%
Maximum output power 3500 W (4000 VA)
Maximum output current 17.4 A
Overload P > 110% 3 mins P > 120% 1 min
Operation frenquency range 50 (60) Hz ± 2 Hz autodetection
Efficiency > 93% at full load
AC output protection 30 A fuse - overload - overcurrent - overvoltage - overtemperature
MECHANICAL DATA
Dimension (LxWxH) - rack 19” 750 x 600 x 900 mm
Ambient operating temperature 0°C ... +40°C
Ambient operating humidity max 95 (non condensing)
System IP rating IP20
Weight 70 kg
Charger cooling forced ventilation
Slot available for battery (each solt is 3 unit) 3
FEATURES & COMPLIANCES
Communication RS485 & Powerline with Relink Gateway
Display LCD
Warranty terms 2 years product
Safety compliance IEC 62040-1
EMC compliance IEC 62040-2
Monitoring Gateway & Relink Portal (coming soon)
Technical Specification Table BAT25
Technology LiFePO4
Noninal capacity 2500 kWh
Standard capacity 2000 kWh
Nominal DC voltage 158.4 V
Maximum charging current 21.2 A
Battery protections (with BMS) overvoltage - undervoltage - overcurrent
Dimension 3u tray suitable for 19” rack
Weight 25 kg
Battery compliance IEC 62133
RELINK Limited
35/1, Salvu Psaila St.
BKR9072 Birkirkara, Malta
t: +356 21232096
www.relink.com.mt | admin@relink.com.mt