1. Manuel E. Padilla
18227 Fair Grange Lane
Cypress, TX 77433
Phone: Cell. (832) 748-1415, Home (281) 856-8759
E-Mail: mannypadilla66@yahoo.com
EDUCATION: ASSOCIATES DEGREE IN ELECTRO-MECHANICAL DESIGN - 1995
NEW ENGLAND TECHNICAL COLLEGE, WARWICK, RI
PDMS PIPING AND EQUIPMENT LEVEL I CERTIFICATE – 2009
HOUSTON COMMUNITY COLLEGE (HCC), ALIEF CAMPUS, HOUSTON, TX
SPED GREEN PROCESS PIPING LEVEL I CERTIFICATE – 2010
HOUSTON COMMUNITY COLLEGE (HCC), CODWELL CAMPUS, HOUSTON, TX
EXPERIENCE: STAR ENGINEERING SERVICES, INC – 12/15/08 – UP TO DATE
HOUSTON, TX OFFICE
SENIOR PIPE AND FACILITIES DESIGNER
Worked on the following projects Deep Gulf Energy’s in 2014 thru 2016 Kodiak for Williams Devils Tower MS Canyon
Block 773, Condor, Pyrenees and Sargent Projects for an subsea tie-back API 10K# and 15K# incoming flowlines and
new Production Modules addition (Test/Production Separator with a Heat Exchanger); in 2011 worked on Newfield
Exploration Pyrenees’ Project for a Subsea Tie-Back incoming flow line and a new Production Module addition
(Test/Production Separator and 3 Heat Exchangers); also on Exterran Eagle I Compressor Barge As-Built Mechanical
Flow Diagrams in Trinidad and in 2012 on Lucius Offshore Project designing for A Production Yard Valve and Equalizer
skids addition 3D structural frame models, Equipment and Piping 3D models, Created and prepared sets of MMS permits,
P&ID’s, Skid Package, ICP Plans, Pipe Supports 3D models and details and Isometric drawings, revisions and As-Built in
Cadworx 2011 and Autocad 2013. Also generated weight take off calculations in Microsoft Excel and sets of PDF files for
both projects. Also worked since 2012 worked on several Onshore Projects for Talisman Energy such as STS, Cooke,
Weeks Battery, Hughes & Dovalina and Powers production sites located in South Texas. Created Piping Plans,
Isometrics, Equipment Location Plot Plan, Mechanicals Flow Diagrams, Vessel Dimensional layouts, Pipe Supports 3D
models and details, Pipe Racks 3D models and details in Cadworx 2011 and Auto CAD 2013 and 2015. Worked on
Cooke Plant Mechanical Flow Diagrams As-Built. Attended Safety Meetings, Helicopter survival crash course and TWIC
card holder.
ATLAS ENGINEERING INC – 06/2008 – 12/05/2008
13831 Northwest Fwy. Suite 450, Houston, TX 77040
SENIOR PIPE DESIGNER
Worked contract on several offshore projects such as platform upgrades, equipment addition and hurricane damage
assessments for oil and natural gas facilities. Developed drawings using Cadworx 2008, AutoCAD 2008, Isogen, Navis
Works, Excel, created PDF’s files for clients and archived files in Windows XP. Made offshore trips to locate equipment,
routing pipe and mechanical walk-downs for P&ID’s and MMS permit drawings and working with a team preparing and
distributing the scope of work on daily basis and creating and delivering PDF Files through e-mails for clients and
fabricators, keep up a job book for every project delivered.
EXCEL ENGINEERING INC – 11/2007 – 06/2008
3200 Wilcrest, Suite 250 Houston, TX 77042
SENIOR PIPE DESIGNER
Worked contract on Dana Gas Crescent Petroleum Khor Mor LNG Recovery Plant Project adjusting piping models,
annotating and revising piping plans, sections, supports details and isometric drawings for fabrication using Cadworx 2008
AutoCAD 2008 and attended safety meetings for plants design, operation and recommendations to prevent accidents.
UPSTREAM ENGINEERING LLC – 06/2007 – 11/2007
1505 Hwy. 6 Suite 280 HOUSTON, TX
SENIOR PIPE DESIGNER
Worked contract designing piping models for skids, ICP lines and vessels in 3D with Cadworx and AutoCAD 2007, ran
isometric drawings with Isogen; prepared set of drawings for skids and made pipe supports models in 3D; created details
and pipe support location plans; prepared set of piping plans drawings for the installation phase also on new P&ID’s and
equipment arrangement layouts and revisions as required and created PDF’s files for VAALCO Gabon Inc. and BPZ
Energy Inc. Projects.
STAR ENGINEERING SERVICES INC – 06/1999 – 06/2007
METAIRIE, LA AND HOUSTON, TX OFFICES
PIPE DESIGNER
Worked developing and preparing complete sets of permits and fabrication drawings for offshore and overseas projects in
the oil and natural gas industry using AutoCAD and Cadworx 2007, Isogen, Adobe Acrobat, Excel and Windows XP.
Also made offshore trips to locate equipment, route pipe, tie-in points and Mechanical Flow Diagrams walk-downs,
prepared and distributed scope of work for a team. Also created and delivered PDF files and e-mails for clients and
fabricators and document control archiving.

2. TECHNICAL ENGINEERING CONSULTANTS INC - 06/1995 – 01/1999
GRETNA, LA
FACILITIES CAD DRAFTER
Worked with a facilities team developing drawings for several offshore projects in the Gulf of Mexico using Auto Cad, Pro
Pipe, Pro Iso and Windows software. Made drawing revisions in AutoCAD and issued them for MMS approval, for bid and
for construction.
INTERESTS: To continue learning and get training on more software programs like PDMS and Smart Plant and have an opportunity
utilize it in the near future, to enhance my experience as a Senior Piper and 3D Model Designer.
REFERENCES: Available upon request.