An overview and technical specifications for the Fv54 prime mover truck from the Fuso line.

1. specification
sheet
fv54JR
455hp •24000kg gVm •60000 GCM • 3.86m wb •air suspension
prime mover
6x4 FV54
engine brake
B Double Rated
driver’s air bag
hill start system
automated transmission
adr approved sleeper cab
optional limited slip diff
optional alloy wheels & high roof
HIGH ROOF illustrated

2. MODEL:
FV54SJR5VFAA 6x4 standard roof
FV54SJR5VFAB 6x4 high roof, alloy wheels
WHEEL BASE
3860mm
3860mmSPECIFICATIONS
ENGINE
Mitsubishi FUSO OM457-T5 Diesel (ADR 80/03)
Configuration: 6 Cyl. In-line OHV
Type: Waste-gate Turbocharged with
Air to Air Intercooled
Displacement: 12 litre (11967cc)
Bore: 128mm
Stroke: 155mm
Power (DIN): 335kW @ 1900 rpm
Torque (DIN): 2200Nm @ 1100 rpm
Maximum Engine Speed: 2100 rpm
Cooling System: Water Cooled with Viscous Coupling Fan
Air Cleaner: Paper Element Type with Restrictor Indicator
Vertical Intake Mounted on Clean Air Side (RH)
Emission Control: Selective Catalytic Reduction (SCR)
Fuel
IInjection System: Unit Pump Injection
Fuel Capacity: 350 Litres Rectangular Steel Tank
with Locking Cap
Max Fill to approx 96% of Air Capacity
Filtration: Filter with Water Separator and Dash Indicator
AdBlue Exhaust Fluid Tank: Locking Cap Type
Capacity: 40Litres
Electrical
Voltage: 24V Negative Ground
Alternator Capacity: 80 amp
Starter Capacity: 24V-7.0kW
Battery Capacity: 2x12V, 150Ah/20hr
Battery Specification: 2x145G51 (N150)
Headlamp - Type: Halogen
Fog Light: Halogen
CLUTCH
Control: Automated Manual (no clutch pedal)
Specification: MFZ Twin Plate 400mm diameter
Transmission
Fuso G330-12 (INOMAT-II)
Type: 12 Speed Automated Manual
Features: Crawler Mode
Skip Shift Function for Light Loads
ECO Mode to Minimise Fuel Usage
Ratios: 1st
2nd
3rd
4th
5th
6th
7th
11.639 9.020 7.035 5.452 4.400 3.410 2.645
8th
9th
10th
11th
12th
RHigh RLow
2.050 1.599 1.239 1.000 0.775 9.900 12.774
Torque limited to 1853Nm from 1st
to 3rd
and Reverse
PTO Opening: Rear of Transmission
Propeller shaft
Type: Single Main Shaft GW5E2200
Inter-axle Shaft P12
Front Axle
FUSO F090T
Type: Reverse Elliot ‘I’ Beam
Capacity: 7500kg
REAR AXLE
FUSO R12/D12
Type: Full Floating Hypoid Type Tandem Drive
with Inter-Axle Diff Lock
Capacity: 21600kg*
Ratio: 4.625:1
*See MAX LOADING for vehicle capacities
The new generation intercooled, turbocharged power
plant provides 24% more torgue and protects the
enviroment with its SCR Emmision Control.
Suspended driver’s seat with
multiple adjustments & lumbar
support for driver comfort.
Spacious, climate controlled cabin with central locking, electric windows, radio / CD
player, and automated transmission, makes the Fuso Heavy Truck range a winner in
driving and operational comfort and ease.
and other specifications for Fuso trucks

3. GVM:
24000kg
24000kg
GCM:
60000kg
60000kg
Steering
Type: Integral Ball and Nut
Steering Column: Tilt/Telescopic Adjustable
Brakes
Type: Full Air, Dual Circuit with FUSO Taper
Rollers, ABS plus ASR (Anti Slip Regulator)
Size - Front: 410x150mm
- Rear: 410x200mm
Park Brake: Rear Wheel Spring Actuated
Auxiliary: Powertard Exhaust Brake with
4 Levels of Retardation
Tailer: Hand Control Valve, Air Lines
Coupling and Electrical Cable
FRONT SUSPENSION
Type: Long Taper Leaf
Size: 1500x90mm Leaves
Shock Absorbers: Double Acting
REAR SUSPENSION (air)
Type: Trailing Arm Air Suspension with Dump Control
Road Friendly Rated: Approval Number RF2011
Air Bags: 2x250mm dia.
Capacity at Ground: 18000kg total*
Shock Absorbers: Double Acting
*See MAX LOADING for vehicle capacities
CHASSIS
Type: Reinforced Parallel Channel
Rear of Chassis Tapered to Suit Tractor
Size: 300x90x7.0mm
Width: 840mm
Tensile Strength: 540Mpa
WHEELS & TYRES
Wheel - Type: FV54SJR5VFAA 11, Single Piece Steel Disc (Including Spare)
FV54SJR5VFAB 11, Single Piece Alloy Disc (Including Spare)
- Size: 22.5x8.25DC
- Stud Pattern: 10x335mm PCD
Tyre - Size Front: 295/80R22.5 152/148
- Size Rear: 11R22.5 148/145
- Size Spare: 295/80R22.5 152/148
OPTIONAL EQUIPMENT
R02: Limited Slip Differential (LSD) for Both Diffs
MASS (kg - estimated)*
Model Front Rear Total
FV54SJR5VFAA 4415 3285 7700
FV54SJR5VFAB 4450 3265 7715
Note: Mass (est.) includes oil and water but excludes spare wheel, tools & fuel
* Weights provided are subject to 3.5% variation (+/-)
instruments
Gauges: Speedometer with Odometer
Tachometer
Air Pressure (2)
Fuel Level
Water Temperature
AdBlue Level
Colour Information Display Fuel Consumption
Service Indicators
Hour Meter and Tripmeter
Oil Level Check
Warning Lamps: ABS
ASR
Turn Signal
High Beam
Engine Brake & Shift Down Brake
Driver’s Seat Belt
Fog Lamp
All Major System Faults
Oil Level
Ad Blue Low
Air Suspension Low
Alternator
Differential Lock
Cruise Control
Cab Tilt Lock
Warning Lamp/Buzzer: Air Pressure
Oil Pressure
Hill Start
Park Brake
Engine Overrun
Engine Overheat / Low Coolant Level
Cab features
Type: All Steel Forward Control Elec / Hyd Tilt Cab:
Mounting: Air Suspended Front and Rear
Colour: Natural White
Windscreen Wipers: 2 Speed + Intermittent Cycle
with Integrated Washer Nozzles
Rear Vision Mirrors: 2 x External
Flat Main Mirrors Plus Convex Spotters
Motorised Main Mirrors, All Mirrors Heated
Seating Capacity: 2
Seat Belts: 2 Lap Sash
Seats - Driver: Suspended with Lumbar Support
- Passenger: High Back Fixed Base
Sleeping: ADR42/04 Approved Sleeping Berth
MAX. LOADING
Model Front Rear Total
FV54SJR 6500kg 18000kg 24000kg
} Air Rear Suspension
Safety is paramount with driver’s air bag, seat belt pre-tensioners, cruise control, hill start system
on automated models, motorised mirrors, easy to read comprehensive instruments and left hand
transon window combine to provide uncompromised driver safety.
SCR is a simple system that allows the engine to be tuned for optimal
combustion and injects AdBlue into the exhaust to reduce emissions.

4. Unless specified in writing herein the accessories, applications, bodies or equipment depicted in this document are for illustration purposes only and may not be available from Mercedes-Benz Australia/Pacific Pty Ltd (ABN 23 004 411 410) (“MBAuP”).
No representation or warranty whatsoever is given in relation to any accessories, applications, bodies or equipment or suitability of same that are shown herein that may be manufactured, supplied or fitted by a party other than MBAuP. MBAuP
reserves the right without notice or obligation to discontinue or make changes to the colour, designs, materials and specifications of the products and options referred to herein at any time. For the most current information and in order to ascertain
which accessories, applications, bodies and equipment are available from MBAuP please contact your authorised Mitsubishi FUSO truck and bus dealer. Fuso is a registered trademark of Mitsubishi Fuso Truck & Bus Corporation.
Copyright © MBAuP. Reproduction in whole or part prohibited without written approval. Date: Nov. ’11 Part No. TSH55A
Call 1300 426 812 or visit fuso.com.au
SPECIFICATIONS
warranty
3 YEAR & 3 YEAR
Basic/Powertrain
3 Years, 200,000kms or 4,000 operating hours
(whichever comes first)
3 Years Cab Perforation/Anti Corrosion
STANDARD FEATURES
Driving
Driver’s Air Bag and Seat Belt Pre-tensioners
Suspended Driver’s Seat
Hill Start System
Central Locking
Electric Windows
Cruise Control (range 40 to 100km/h)
LH Transom Window
24V Accessory Power Outlet / Cigar Lighter
Climate Control
Opening Rear Quarter Glass
Radio / CD Player
Cup Holder
Fluorescent Cabin Lamp
Trailer Package including Trailer “Stretch Brake”
Storage
Centre Storage Console
Dash Storage Tray 2 DIN
Dual Overhead Storage
Coat Hooks
High Roof Model includes Additional Overhead Storage
Cab: External
Fog Lights
Door Side Impact Beams
Roof Mounting Points (max. static load 70kg)
Front End-Outline Marker Lamps
Dual Air Horns
Chassis
Integrated Front Underrun System (FUPS)
Tool Kit
Reverse Warning Buzzer
Clear Top of Chassis Rail for ease of Body Fitment
DIMENSIONS (mm)
Wb = Wheel Base FV54JR
Standard High
Roof Roof
Width Front Fender: 2490 2490
Rear Axle: 2485 2485
Front Track: 2055 2075
Rear Track: 1850 1865
Frame: 840 840
Length A Overall: 6690 6690
B Extreme Axle Spacing: 4520 4520
C Front Overhang: 1370 1370
D Wheelbase: 3860 3860
F Rear Axle Spacing 1320 1320
G Front Axle to Rear of Cab: 700 700
H Rear of Cab to Trailer Valve 183 183
I Frame, Trailer Valve to Rear Axle 2977 2977
J Frame, Rear Axle to End: 1460 1460
Height N Overall: 3299 3648
O Air Intake to cab Roof 205 225
P Cab to Ground: 3094 3423
Q Cab to Frame: 2090 2420
R Rear Frame to Ground:- Inflated: 1033 1033
- Deflated: 976 976
Turning Circle (kerb to kerb): 12.8m 13.0m
Performance - (Calculated-paved road)
Electronically Speed Limited to (km/h) 100
Engine Speed at 100km/hr in top gear (rpm) 1882
Gradeability** at Rated GCM: 26%
** This is Theoretical Performance (it may vary under different conditions).
Note: Chassis reinforcement must be utilised for Tipper/Demountable type body
configurations.
To conform with ADR 13/00 (lighting requirments) the following must be adhered
to at body installation.
- If other than a flat type or tipper body is fitted, rear end out-line marker lamps
must be installed.
- If overall length exceeds 6.0 metres, side reflectors must be installed.
- If overall length exceeds 7.5 metres, side marker lamps must be installed.
To conform with ADR 42/04 (General Safety), rear wheel guards must be fitted to
the vehicle.