1. Page 1 of 2 References available upon request
Career History
Current position (Since January / 2015)
Job Title: QA/QC Engineer
Department: Quality Department
Employer: Saudi Metal Art Work Co.
Arabian Roots Group – Jeddah KSA
Job Responsibilities:
Prepare inspection and test plans (ITP), QC inspection reports, and acceptance criteria
according to project specifications with respect to International standards such as AWS,
ASME, ASTM, and ISO.
Check approved shop drawing received from consultant or client repetitive.
Prepare welding book (WPS, PQR, and Welders prequalification) to be submitted to
consultant with Material submittals (MTS) and Document submittals (DCS).
Hold receiving inspections activities for fabrication raw materials (Material grades sorting
using Portable Spectrometer and Mechanical tests such as hardness and tension test).
Inspection of Steel Structure Fabrications for Dimensional and Fit-up check.
Checking painted / coated steel surfaces (coating thickness, zinc content and surface finish).
Inspection of welding joints and connections as per AWS (Visual check, NDT such as Die
penetration test, Ultrasonic and X-rays radiography).
Perform tests and inspections to be witnessed by third parties as per customer requirement.
Responsible for submitting MIR to consultant and get product release to be sent to site.
Inspection of Decorative items such as Gold Plated items and Stainless steel Handrails.
Responsible for calibrating devices which could be internally calibrated and holding calibration
plan for which are externally calibrated.
Responsible for holding ISO 9001 documents and preparing internal audit.
January / 2013 – December / 2014
Job Title: Quality Control Shift Engineer
Department: Quality Department
Employer: Alexandria Automotive Casting Co. – Alexandria Egypt
Automotive and parts manufacturing industry
Job Responsibilities:
Responsible for doing in process control activities to assure that manufacturing process is
done according to quality specifications and control plans.
Apply variable metal tests such as Microstructure check, Hardness and Tension test,
porosity check by X-rays and Die penetration test, analysing material composition by
Spectrometer, checking material grade using Ultrasound test…etc.
Monitoring cast full dimensions by CMM machine.
Perform receiving inspections for metal and sand raw materials.
Follow up customer complaints and take the necessary corrective actions.
Take charge of product audit activities and product sorting actions including inspecting
products for casting defects as requested by customer.
Develop statistics by calculating the percentage of defected products record inspection data.
Develop a quality control plan based on ISO 9001 and ISO/TS 16949
Khaled Mahmoud Shehata
E-mail: khaledshehata_eng@hotmail.com
Mobile: KSA +966540416199 / +966580622971
Egypt +201014281475
Objective
Seeking a challenging engineering position in a leading organization where all my knowledge and
skills are best utilized and developed.
2. Page 2 of 2 References available upon request
Personal Details
Name: Khaled Mohamed Mahmoud Mohamed Shehata
Location: Jeddah, KSA
Date of birth: 08/01/1990
Marital status: Single
Nationality: Egyptian
Training and Certificates
Currently Certified Welding Inspector preparation course and practical training
September / 2015 Practical Training on XRF Spectrometer Application
February / 2015 ISO 9001:2008 Internal Audit training course
December / 2014 Lean Six Sigma Black Belt 120 hours training course
September / 2011 Management of Mini-projects course certified from Shell education center
October / 2012 – January / 2013
Job Title: Mechanical Design Engineer
Department: Lean Manufacturing Engineering Department
Employer: Alexandria Automotive Casting Company
Job Responsibilities:
Responsible for performing technical studies for new projects and preparing project status
reports, cost benefit analysis and recommended actions.
Develops manufacturing processes by designing and modifying equipment for fabricating,
building, assembling and installing components.
Responsible for creating 3D CAD models of parts and assemblies then creating dimensional
drawings and complete bill of materials.
Prepare design calculations and CAD drawings for steel structure projects.
Personal Skills
Languages
Arabic: Mother tongue
English: Excellent
French: Fair
German: Fair
Computer skills
Proficient in Computer Aided Design applications (Solid Works and AutoCAD)
Familiar with Finite element analysis software (Cosmos and Mat Lab)
Microsoft Office
Sports and hobbies
Judo: 3rd place in Alexandria championship and 1st place in championship for schools
Basketball: Worked as a mini-basket referee
Fishing
Education
2008 - 2012
Graduated from: Faculty of Engineering – Alexandria University
Degree: B.Sc. in Engineering – Mechanical Department
Grade: Good (70%)
Graduation project: Energy recovery for cars through small scale wind turbine
Graduation project grade: Excellent
1995 - 2007
Graduated from: Sidigaber language school
Degree: High School Certificate
Grade: Excellent (97.6%)