PPT based on the Infusion pump.

1. IN FUSION
PUMP
PROF. JITENDRA TORAVI SIR
GROUP MEMBERS:
Ke t k i K u l k a r n i – 1 9 1 0 5 A 0 0 0 3
S h w e t a K h a t a ke – 1 9 1 0 5 A 0 0 2 8
I s h a D o s h i – 1 9 1 0 5 A 0 0 0 6
D i s h a Pa t i l – 1 9 1 0 5 A 0 0 5 8

2. W H A T IS INFUSION PUMP?
An infusion Pump is a Bio-medical Device
that is capable of delivering fluid in large
or small amounts and use to deliver
nutrients or medications such as insulin or
other hormones, antibiotics, chemotherapy
drugs, and pain relievers, to a patient's
body in a controlled manner.
Types of Pumps
are :
• Infusion
Pump
• Syringe
Pump
• Insulin Pump
• PCA Pump
•Suction Pump
•Peristaltic Pump
•Multi-channel
Pump
•Smart Pump

3. Some Infusion Pumps are designed
mainly for stationary use for the
Patients bedside others called
Ambulatory Infusion Pumps, are
designed to be portable or wearable.
Stationary
Infusion Pumps
Ambulatory
Infusion Pumps

4. HOW IT WORKS?
•Hang the Saline bottle, fix the IV tube in the
peristaltic sheet.
•Start the Infusion Pump by tapping the switch
situated behind the equipment.
•Set the Adult or Micro Mode as per the requirement.
•Set the unit i.e. ml or drop by ML Mode Button.
•Set ml and set time with their respective buttons and
the rate will be automatically displayed on the screen
or you may also set the rate.
•After setting that press the START Button to begin
infusing liquid.
•You may also use the BOLUS setting for fast infusion.
•When you have to stop the infusion press STOP

5. s are usually shown
dience. It serves a
variety making
presentations
ls for convincing and
Presentation
before an au
of purposes,
powerful too
teaching.
PARTS OF
INFUSION PUMP

7. Large volumetric pump :
The LVPs are infusion pumps, which
infuse large volumes of nourishment or
medication fluids. They often employ
electronic peristaltic pumps. The pump is
controlled by manual means or through a
Syringe Pump :
These are infusion pumps that deliver low medication volumes for medication
required in small quantities. Many times these are used on babies and young
children. These infusion pumps are ideal in providing medication in small amounts
such as hormones, which you can deliver through a controlled motor mechanism
that uses a pumping system that works like a plunger.

8. TECHNICAL
SPECIFICA TION
1. Brand - AKAS
2. Price - RS. 35,200.00
3. POWER SUPPLY - AC 220V to 240V 50Hz
4. BATTERY BACKUP - 4hrs @ 8 drops/min
5. POWER CONSUMPTION -10VA
6. PUMPING MECHANISM - Linear Peristaltic
7. DROP SENSOR - External ‘Air in line’
8. DETECTOR - Internal
9. BATTERY TYPE - Rechargeable Ni-Cd, Built-in &
standard
10.ALARM INDICATION - Target volume, Target time,
Excess flow, Less flow, Air in line, Battery low, KVO
11.PURGE FLOW - Flushing of IV tube possible
12.DROP RATE RANGE - 1 to 150 drop/min for Adult
13.VOLUME RATE RANGE - 0.5 to 900 ml/hr for Adult
14.DROP RESOLUTION - 1 drop/min
15.BOLUS FUNCTION - Auto Bolus, Purge Bolus
16.TARGET VOLUME - 1 to 990ml
17.BOLUS VOLUME - 0.1 to 50mL

9. MANUFACTURERS

10. CA UT ION S
• Don't use the Infusion Pump on Anesthetic Patient.
• Don't operate it in a high-pressure oxygen room.
• Don't install or store pumps where the chemicals are
stored.
• Don't expose it to sunlight or any other strong light.
• Don't store or operate it to the area where the air pressure increases or
decreases spontaneously.
• Don't expose it to dust or the presence of corrosive gas in the
atmosphere.
• Don't carry it in the area where vibration occurs.
• Don't expose it at a hot place or splashing water.

11. THANK
YOU