1. www.powertemp.com
Versa Lug
*
(800) 472-1158
The Versa Lug* is a patent pending repetitive and
multi-use lug designed to alleviate the problems
associated with standard aluminum allen wrench lugs.
The Versa Lug can be used for a variety applications
that require wiring and unwiring cable on a regular
basis. It can accommodale both bare ended or eyelet
wire, features an oblong shaped hole which makes
connecting frayed cable easier, and allows for greater
tourque and cable compression.
The lug bolt features a compression end with a patented spinning tip that stays in place as the cable
is compressed and does not twist and knurl the wire, extending the usability of the cable end and
reducing the need to trim the cable ends after each use.
Alleviates the problems associated with standard allen wrench lugs.
Additional Features
Square Stock for Added Wrench Grip
Patented Spinning Bolt End with Hex
Head and Allen Insert.
• Copper or aluminum
• 1/4” slot and (2) 1/4” clamping bolts
• Rear 1/2” threaded hole for bolting or stud applications
• (2) 1/4” threaded holes for bolting or anti-spin bolts or studs
• 1/2” threaded holes on all four sides
• Square stock for added wrench grip
• Rated for 600A and cable sizes #6 to 250 MCM
• UL Listed
T Slot Buss AdapterBuss Installation Slot Stackable Lugs
* Patent Pending