Bomag bw 211 d 4 single drum roller service repair manual
Service Price Book
1. GRUNDFOS
TABLE OF CONTENTS
GRUNDFOS
SERVICE &
SOLUTIONS
GRUNDFOS
SERVICE &
SOLUTIONS
BM.......................................
BME, BMET.........................
BMP.....................................
BMQE..................................
®
BoosterpaQ ........................
CH, CHI...............................
CM.......................................
Control Box & CU321..........
CR.......................................
Disinfection..........................
Dosing.................................
HS.......................................
Jet Pumps...........................
LM, LP.................................
Machine Tool.......................
Magna.................................
ML/MG, MLE/MGE..............
MQ.......................................
SP........................................
Sanitary...............................
Sump, Sewage and
Effluent................................
Tools....................................
TP, UP, UPS........................
UMC, UPC, UMT, UPT........
4
20
26
30
32
34
42
48
50
124
132
140
142
146
148
164
SERVICE AND REPAIR......
Service Information and
Repair Rates
1
166
170
174
192
196
202
210
218
2. GRUNDFOS
Service and Repair Pricing
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
1
Grundfos offers either a complete rebuild for your pump or a minor repair. All
service at Grundfos facilities is performed by certified Grundfos technicians
conforming to ISO 9001 high quality standards.
Complete Rebuild
Completerebuildsincludeamajoroverhaulofwornanddamagedcomponents.
Allrebuiltpumpsarereturnedtothecustomertestedtohighqualitystandards,
are fully repainted, and include a twelve-month warranty from date of repair.
Minor Repair
Minor repairs include service such as mechanical seal and/or gasket
replacements and exclude the replacement of any major components. All
repaired pumps are fully tested prior to return. No additional warranty is
provided.
Other Services
Configuration/programming services are provided at $150 net each.
Special Pump Tests (net)
*(Definitions on next page)
Verified Pump Performance Test: $500 adder per pump.
Witness Verified Pump Performance Test: $750 adder per pump.
Hydrostatic Test: $450 adder per pump.
Witness Hydrostatic Test: $700
AUTHORIZED SERVICE CENTERS
For a list of Authorized Service Centers, contact Grundfos or
www.grundfos.com.
FIELD SERVICE
Assistance or training by Grundfos can be provided in the field for installation,
start-up, operation or maintenance of Grundfos products. Grundfos field
technicians generally ask that the customer furnish all necessary tools, safety
equipment, and measuring devices upon service call. Exceptions must be
prearranged.Electricalservicesshallbelimitedtothemotorwiringconnections.
FIELD PRICING
General repair work by Skilled Technician:
•Service day rate: $1,200 net
•Hourly rate: $150 net
Installation, start-up, commissioning, troubleshooting, and
assessments of pumping systems:
•Service Engineer day rate: $1,600 net
•Hourly rate: $200 net
Pump Audit: $2,000 net
Commissioning fees for BME/BMET/BMEX products:
•Service Engineer rate: $5,600 net
(each visit includes 2 days on-site and 2 days travel)
•Additional days on-site: $1,400 net
Rates are applicable from date of departure from base point until return. Work
and/or travel totalling over 8 hours per day will be charged at the hourly rate
(except BME/BMET/BMEX commissioning). Technicians work maximum of
12 hours per day. Field services provides Grundfos personnel in an advisory
capacitytoguideandcounselpurchaser'spersonnelininstallation,alignment,
start-up, operation and maintenance of Grundfos equipment.
Add to rates as follows:
1) Transportation: by car, $ .75 per mile; by common carrier, as
incurred.
2) Lodging, rental car, and job-related telephone expenses will be
charged at cost. Copies of receipts will be furnished to
purchaser.
3) A charge of $85.00 per day will be the per diem rate for all meals
and incidental expenses.
NOTES:
• Grundfos cannot accept products which have been contaminated
with toxic or hazardous materials.
• Grundfos reserves the right to change prices without notice.
• See our website at www.grundfos.com.
3. STANDARD FACTORY PUMP PERFORMANCE TESTS
The Grundfos factory tests virtually every pump for proper performance
during the production process and there are only very rare exceptions to
this rule (e.g. 50 Hz submersible pumps, which requires an additional cost).
The factory uses calibrated measurement equipment to perform the tests,
and both Grundfos Pumps and ISO test procedures are strictly followed.
Pump performance is typically measured at two or three pre-defined flow
points (gpm) throughout the performance range of the pump, and the
resulting total dynamic head (feet), voltage (volts) and current (amperes)
for each flow point is measured. The test criterion is "pass/fail" and the
actual test values are not documented or provided with the purchase
of the pump. If actual test values need to be documented for a specific
pump, a verified pump performance test is required. The standard factory
pump performance test is included free with the purchase of the pump (no
additional charge).
VERIFIED PUMP PERFORMANCE TESTS
(performed at the factory)
The Grundfos factory will conduct a verified performance test to measure
and document the performance of a specific pump. The factory uses
calibrated measurement equipment to perform the tests, and both Grundfos
Pumps and ISO (ISO 9906 Annex A [equivalent to HI Acceptance Grade
3B]) test procedures are strictly followed. Pump performance is measured
at a minimum of five flow points (gpm) throughout the operating range of
the pump, and the resulting total dynamic head (feet), voltage (volts) and
current (amperes) at each flow point is measured and recorded. The results
are documented in a test report and forwarded to the appropriate contact
person of the company purchasing the pump. A verified test number is
engraved or stamped on or near the pump nameplate, and this number will
also appear on the test report. Please note that the factory will only conduct
a verified pump performance test on complete pumps (pumps with motors).
If a verified test is required on a pump end only, the test will need to be
accomplished through the Grundfos Service Department.
VERIFIED PUMP PERFORMANCE TESTS
(through the Service Department)
Grundfos Service Department can also perform verified pump performance.
These tests are typically done on pumps that are in the Service Department
for repair or modifications, but can also be done on new pumps (such as
pump ends) through the "Interspeed" Program. The Service Department
uses calibrated measurement equipment to perform the tests, and both
Grundfos Pumps and ISO test procedures are strictly followed. Pump
performance is measured at a minimum of five flow points (gpm) throughout
the operating range of the pump, and the resulting total dynamic head (feet),
voltage (volts) and current (amperes) at each flow point is measured and
recorded. The results are documented in a test report and forwarded to the
appropriate contact person of the company purchasing the pump. A verified
test number is engraved or stamped on or near the pump nameplate, and
this number will also appear on the test report.
WITNESSED VERIFIED PUMP PERFORMANCE TEST
A representative of the company purchasing the pump physically goes to
the Grundfos factory or Service Department to witness the test.
HYDROSTATIC TEST
The Grundfos factory will perform a static pressure test and document the
results for a specific pump. The pump is filled with water and pressurized
to 1.5 times (1.1 times for pumps with thermoset parts) the published
maximum working pressure, and the pump is not in operation during this
test. The pressure will be maintained for ten minutes with no material defects
or leakage (slight leakage around the mechanical seal is acceptable). The
results are documented in a test report and forwarded to the appropriate
contact person of the company purchasing the pump. A hydrostatic test
number will be engraved or stamped on or near the pump nameplate and
this number will appear on the test report. Please note that hydrostatic tests
are not available for submersible pumps.
GRUNDFOS
Centrifugal Pump Tests
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
Please verify prices with Grundfos when you order; prices are NET.
TEST NET PUMP
TYPE PRICE TYPES
Verified Performance Test 500.00 SP, CR, TP, LP, LM, CRK, SPK, MTR
Hydrostatic Test 450.00 CR
Witnessed Verified Performance Test 750.00 SP, CR, TP, LP, LM, CRK, SPK, MTR
Witnessed Hydrostatic Test 700.00 CR
Vibration Test 1,200.00 CR
Witnessed Vibration Test 1,450.00 CR
Notes:
1. For pump types not listed consult factory
2. Extra delivery time will normally be required
3. A test report will be shipped with the pump
4. Pumps are tested in accordance to ISO 9906 Annex A (equivalent to HI Acceptance Grade 3B)
5. Vibration test is in accordence with ISO 10816
2
6. BM
Sectional Views
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
– 301a
5
BM4
(For position number
reference)
BM6
BM8
(For position number
reference)
(For position number
reference)
NOTES: Some referenced position numbers may not be available as individual items (see complete kit).
301b–
– 301a 301b–
301a– – 301b
For contents of kits, see the Grundfos Product Center.
7. MATERIAL POS.
NUMBER NO.
Booster Module
790773 BM 4” Lead & Bushing Serv Kit, Model C/D, Mfg. >8/98, FKM 602.00
790774 BM 4" Lead & Bushing Serv Kit, Model B, Mfg. < 8/98, FKM 710.00
790775 BM 6”, 4" Mtr. Lead & Bushing Serv Kit, FKM 823.00
96590980 BM 4” T.B. Lead & Bushing Serv Kit, Model B to C/D, FKM 465.00
95061961 372 BM(B) 17 and 30 Pump Brace 315.00
96490909 372 BM(B) 46 and 60 Pump Brace 282.00
96591175 373 BM 4", 4" Mtr. Centering Kit, Model D 137.00
155547 373 BM 6", 4" Mtr. Centering Kit, 316SS, 50 BAR 1,014.00
155967 373 BM 6", 4" Mtr. Centering Kit, 904L, 50 BAR 1,423.00
96591169 373 BM 6", 6" Mtr. Centering Kit, 316SS, 50 BAR 571.00
96591172 373 BMI 6", MS600/6000 MTR. Centering Kit 771.00
96421545 373 BM 8", 6" MS6000 Mtr. Centering Kit, 25 BAR 1,088.00
95062077 373 BM 8", 8" Frank. Mtr. Centering Kit, 25 BAR 1,345.00
155019 377a BM 6”, 4” Mtr. Terminal Box, Complete Model C/D, FKM 1,484.00
155020 377a BM 6”, 6” Mtr. Terminal Box Complete Model C/D, FKM 1,507.00
155023 377a BM 6”, 6” Mtr. Y/D Terminal Box Complete, Model B 2,054.00
155025 377a BM 6”, 6” Mtr. Terminal Box Complete, Model B 2,190.00
155026 377a BM 6”, 4” Mtr. Terminal Box Complete, Model B 1,962.00
96590997 377a BM 4” Terminal Box Complete, Model D, FKM 829.00
96416764 377a BM 8” 37-45 kW./50-60 HP, Terminal Box Complete, Model A, FKM 2,002.00
96416763 377a BM 8” 55-93 kW/75-125 HP, Terminal Box Complete 1,837.00
96579386 BM/B 8” 55-93 kW/75-125 HP Cable Entry CPL. FKM 770.00
95061879 379 BM4" O-Ring, Sleeve, FKM Ø106 x 4.5 26.00
95062281 379 BM6" O-Ring, Sleeve, FKM Ø158.12 x 5.33 50.00
95062176 379 BM8" O-Ring, Sleeve, FKM Ø250 x 5 mm 129.00
96446909 379 BMB 6" O-Ring, Sleeve, FKM Ø175 x 5 mm 35.00
785649 MS6000 "A" Shaft Seal and Diaphragm Kit, FKM 298.00
96502319 MS6000 "B" Carbon Ceramic Shaft Seal & Diaph. Kit, FKM 437.00
96558416 MS6000 "B" Sic Sic Shaft Seal & Diaph. Kit, FKM 668.00
96558324 MS4000 (R, RI) Shaft Seal SIC/SIC and Diaphragm Kit, NBR 156.00
96558325 MS4000E (RE, RIE) Shaft Seal SIC/SIC and Diaphragm Kit, FKM 156.00
990331 Direction of Flow Sticker 10.00
00ID2398 Nyltite Gasket/Washer for Pos. 46 & 13, MS6000 9.00
98587184 Roller for 8" BM(B) Centering Device 148.00
MS4000RE Motors
96652069 MS4000RE 3X380-415/50Hz,440-480/60Hz .75kW / 1HP M8 FKM 3,360.00
96652071 MS4000RE 3X380-415/50Hz,440-480/60Hz 1.1kW / 1.5HP M8 FKM 3,464.00
96652073 MS4000RE 3X380-415/50Hz,440-480/60Hz 1.5kW / 2HP M8 FKM 3,534.00
96652077 MS4000RE 3X380-415/50Hz,440-480/60Hz 2,2kW / 3HP M8 FKM 3,787.00
96652091 MS4000RE 3X380-415/50Hz,440-480/60Hz 3kW / 4HP M8 FKM 3,965.00
96652099 MS4000RE 3X380-415/50Hz,440-480/60Hz 4.0kW / 5.5HP M8 FKM 4,144.00
96652102 MS4000RE 3X380-415/50Hz,440-480/60Hz 5.5kW / 7.5HP M8 FKM 4,564.00
MS6000RE Motors
98710880 MS6000RE "C" 3X400/50Hz,460/60Hz 5.5KW / 7.5HP. FKM 3,669.00
98735497 MS6000RE "C" 3X400/50Hz,460/60Hz 7.5kW / 10HP. FKM 3,754.00
98735498 MS6000RE "C" 3x400/50Hz,460/60Hz 9.2kW / 12.5HP. FKM 4,022.00
98735500 MS6000RE "C" 3x400/50Hz,460/60Hz 11.0kW / 15HP. FKM 4,363.00
98735511 MS6000RE "C" 3x400/50Hz,460/60Hz 13.0kW / 17.5HP. FKM 4,634.00
98735513 MS6000RE "C" 3x400/50Hz,460/60Hz 15.0kW / 20HP. FKM 7,105.00
98735514 MS6000RE "C" 3x400/50Hz,460/60Hz 18.5kW / 25HP. FKM 5,445.00
98735515 MS6000RE "C" 3x400/50Hz,460/60Hz 22kW / 30HP. FKM 5,794.00
98735516 MS6000RE "C" 3x400/50Hz,460/60Hz 26kW / 35HP. FKM 6,365.00
98735517 MS6000RE "C" 3x400/50Hz,460/60Hz 30kW / 40HP. FKM 6,778.00
MS Motor Kits
96558324 MS4000 (R, RI) Shaft Seal SIC/SIC and Diaphragm Kit, NBR 156.00
96558325 MS4000E (RE, RIE) Shaft Seal SIC/SIC and Diaphragm Kit, FKM 156.00
96502319 MS6000 "B" Carbon Ceramic Shaft Seal, seal housing & Diaph. Kit, FKM 437.00
96558416 MS6000 "B" SiC/SiC Shaft Seal, seal housing & Diaph. Kit, FKM 668.00
96164191 MS6000 "C" Carbon Ceramic Shaft Seal & Diaph. Kit, NBR 213.00
96164192 MS6000 "C" SiC/SiC Shaft Seal & Diaph. Kit, FKM 603.00
96164201 MS6000R "C" Shaft Seal Housing (use to convert B to C - allows C leads to fit B 79.00
96164204 Nyltite Gasket/Washer (qty. 50 of 00ID2398) for Pos. 46 & 13, MS6000 1,172.00
96164199 Kit, MS6000 "C" Radial bearing SiC 32 481.00
96164194 Kit, MS6000 "C" Thrust bearing 7.5kN 200.00
96164195 Kit, MS6000 "C" Thrust bearing 27.5kN 350.00
96164196 Kit, MS6000 "C" Thrust bearing 40kN 577.00
MS4000/6000RE Motor Leads
95920942 20 BM MS4000RE 3 Wire Ld wo/ground, 14AWG, 68" XLPE w/FKM O-Ring 216.00
96590755 20 BM MS6000(RE)"B" 3 W-Ld wo/grnd, 8 AWG, XLPE, 5m/196" BM Mfg.>0613, <1415 423.00
96623007 20 BM MS6000(RE)"B" 3 W-Ld wo/grnd, 8 AWG, XLPE, 8m/314" BM, Mfg.>0613, <1415 618.00
96300156 20 BM MS6000(RE)"C" 3 W-Ld wo/grnd, 8 AWG, XLPE, 5m/196" BM Mfg.>1415 423.00
96300157 20 BM MS6000(RE)"C" 3 W-Ld wo/grnd, 8 AWG, XLPE, 8m/314" BM, Mfg.>1415 433.00
790773 BM 4” Lead & Bushing Serv Kit, Model C/D, Mfg. >8/98, FKM 602.00
790774 BM 4" Lead & Bushing Serv Kit, Model B, Mfg. < 8/98, FKM 710.00
790775 BM 6”, 4" Mtr. Lead & Bushing Serv Kit, FKM 823.00
96590980 BM 4” T.B. Lead & Bushing Serv Kit, Model B to C/D, FKM 465.00
96623008 6" BM MS6000R DOL 5m, 3 W-Ld wo/grnd, 8 AWG, XLPE, Lead Kit with Bushings 862.00
96623009 6" BM MS6000R SD 5m, 3 W-Ld wo/grnd, 8 AWG, XLPE, Lead Kit with Bushings 1,123.00
96623010 6" BMB MS6000R SD 5m, 3 W-Ld wo/grnd, 8 AWG, XLPE, Lead Kit with Bushings 589.00
96623011 6" BMB MS6000R SD 5m, 3 W-Ld wo/grnd, 8 AWG, XLPE, Lead Kit with Bushings 1,123.00
96623013 6" BM MS6000R DOL 8m, 3 W-Ld wo/grnd, 8 AWG, XLPE, Lead Kit with Bushings 738.00
96623014 6" BM MS6000R SD 8m, 3 W-Ld wo/grnd, 8 AWG, XLPE, Lead Kit with Bushings 1,305.00
96623015 6" BMB MS6000R DOL 8m, 3 W-Ld wo/grnd, 8 AWG, XLPE, Lead Kit with Bushings 659.00
96623016 6" BMB MS6000R SD 8m, 3 W-Ld wo/grnd, 8 AWG, XLPE, Lead Kit with Bushings 1,152.00
BM
Service Kits
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
LIST
KIT DESCRIPTION PRICE ($)
6
NOTES:
Motors are
Tempcon fitted for
use with MP204.
4" motors include
four metric nuts and
MS6000 include
1/2" UNF bolts for
pump attachment.
Motors do not
include leads or
centering devices
as these differ from
one Booster Module
to another.
New motor leads
must be used when
replacing motors.
Motor centering
devices can be
reused.
For contents of kits,
see the Grundfos
Product Center.
< = Before
> = After
9. BM
Exploded Views
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BM 8
(For position number
reference)
NOTES: Some referenced position numbers may not be available as individual items.
BM 3, 5
(For position number
reference)
8
11. BM
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BM 17
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items.
10
13. BM
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BM 30, 46
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items.
12
16. BM
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BM 60
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items.
15
18. BM
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BM 77, 125
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items.
17
22. MATERIAL POS. MATERIAL POS.
NUMBER NO. DESCRIPTION NUMBER NO. DESCRIPTION
Kits Spare Parts - Turbine (continued)
145177 N/A Gasket Kit for BME Pulley Head 620.00 00ID1368 398a Bolt, Allen Head, M8 x 20mm, BMT 9.00
145178 Gasket Kit for BMT Pulley Head 1,040.00 140168 399 Discharge, Outlet Clear, for all model turbine, BMT 630.00
Service Kit - Grease Gun with Special Fittings and Grease - 2 x 400 gram Motor
96658749 N/A G.G. w/Sm.fittings, w/grease Unirex N2, ABB 30-55kW motors 748.00 96699763 310 Siemens 200L 400/480-2 50/60HZ 30/33.5 kW B03-55, R.B. 5,816.00
96658761 G.G. w/Lg.fittings, w/grease Unirex N2, ABB 75-160kW motors 534.00 96699762 Siemens 200L 400/480-2 50/60HZ 37/41.5 kW B03-55, R.B 7,215.00
96658760 G.G. w/Lg. fittings, w/grease Kluberquiet 72-72, VEM motors 760.00 96699751 Siemens 225M 400/480-2 50/60HZ 45/51 kW B03-55, Ins. R.B. 10,077.00
96741461 G.G. w/Lg. fittings, w/grease Unirex N3, Siemens Motors 534.00 96699750 Siemens 250M 400/480-2 50/60HZ 55/63 kW B03-60, Ins. R.B. 11,727.00
96699749 Siemens 280S 400/480-2 50/60HZ 75/84 kW PTC B03-65, Ins. R.B 14,275.00
Rebuild Sets - Drive Bearing, Grease Gun, Grease and Nipples for Motor 96653933 ABB M2BAT 280 SMB 400/690-2, 90 KW B03, Roller Brg. 21,050.00
96695713 N/A Roller Bearing & Grease-Unirex kit, ABB 75-160 kW motor 2,042.00 96699747 Siemens 280M 400/480-2, 50/60HZ 90/101 kW B03-65, Ins. R.B. 16,396.00
96695714 Roller Bearing & Grease-Kluberquiet kit, VEM 110-132 kW motor 2,712.00 96653934 ABB, M2BAT 315 SMA 400/690-2, 110 KW B03, Roller Brg. 22,974.00
96695715 Roller Bearing & Grease-Kluberquiet kit, VEM 160 kW motor 2,974.00 96699746 Siemens, 315S 400/480-2, 50/60HZ 110/123kW B03-65, Ins. R.B. 18,018.00
96653935 ABB, M2BAT 315 SMB 400/690-2, 132 KW B03, Roller Brg. 21,331.00
Grease Cartridge Replacements 96699742 Siemens, 315M 400/480-2, 50/60HZ 132/148 KW B03-65, Ins. R.B. 21,292.00
96616737 N/A Grease, Unirex N2, 400 gr. container for ABB motor only 122.00 96699720 Siemens, 315L 400/480-2, 50/60HZ 160/180kW B03-65, Ins. R.B. 27,824.00
91079414 Grease, Unirex N3, 400 gr. container for Siemens motor only 120.00
96616736 Grease, Kluber quiet 72-72, 400ml. Container: VEM motor only 294.00 Spare Parts - Pulley for electric motor
96619081 353 Pulley - motor for V-Belt, DIN 2211-SPB-190-55 x 4 grooves 376.00
Spare Parts - Pulley Heads 96405546 Pulley - motor for V-Belt, DIN 2211-SPB-200 x 4 grooves 373.00
96693978 N/A Service, Complete Pulley head 7 grooves BME (145866) 21,273.00 96405547 Pulley - motor for V-Belt, DIN 2211-SPB-200 x 5 grooves 399.00
96693979 Service, Complete Pulley head 9 grooves BME (96486607) 23,670.00 96405548 Pulley - motor for V-Belt, DIN 2211-SPB-200 x 6 grooves 449.00
96863885 Service, Complete Pulley head for Turbine 21,533.00 96405549 Pulley - motor for V-Belt, DIN 2211-SPB-200 x 7 grooves 768.00
145980 N/A Turbine Pulley Head Complete with pipes BME/T a=ø185 45,362.00 96405550 Pulley - motor for V-Belt, DIN 2211-SPB-212 x 4 grooves 389.00
145981 Turbine Pulley Head Complete with pipes BME/T a=ø160 42,965.00 96405551 Pulley - motor for V-Belt, DIN 2211-SPB-212 x 5 grooves 420.00
96586818 347 Thrust bearing cpl. BME/T (w/pos. 368, 369 & 370) 3,911.00 96405552 Pulley - motor for V-Belt, DIN 2211-SPB-212 x 6 grooves 471.00
00ID2915 349(a) Bolt, Hex Head, M10 x 90mm, BME 10.00 96405553 Pulley - motor for V-Belt, DIN 2211-SPB-212 x 7 grooves 901.00
00ID2913 349b,c Lock Nut, M10, BME/T 9.00 96405554 Pulley - motor for V-Belt, DIN 2211-SPB-224 x 4 grooves 398.00
00ID2878 362a Bolt, Hex Head, M12 x 30mm, BME/T 79.00 96405555 Pulley - motor for V-Belt, DIN 2211-SPB-224 x 5 grooves 441.00
140944 363a Housing for thrust bearing, BME 4,662.00 96405556 Pulley - motor for V-Belt, DIN 2211-SPB-224 x 6 grooves 498.00
00ID2201 364(a) Bolt, Hex Head, M8 x 25mm, BME/T 9.00 96405557 Pulley - motor for V-Belt, DIN 2211-SPB-224 x 7 grooves 956.00
96586852 367 Shaft with Thrust Bearing, BMT 5,239.00 96405558 Pulley - motor for V-Belt, DIN 2211-SPB-236-55 x 4 grooves 429.00
96586853 367a Shaft with Thrust Bearing, BME 5,481.00 96405559 Pulley - motor for V-Belt, DIN 2211-SPB-236 x 5 grooves 467.00
145983 368 Thrust Bearing, Stationary, BME/T 3,305.00 96405560 Pulley - motor for V-Belt, DIN 2211-SPB-236 x 6 grooves 523.00
140992 369 Retainer, Thrust Bearing, BME/T 881.00 96405561 Pulley - motor for V-Belt, DIN 2211-SPB-236 x 7 grooves 994.00
140924 370 Lock Pin for Retainer pos. 369, BME/T (4 required) 272.00 96405562 Pulley - motor for V-Belt, DIN 2211-SPB-250 x 4 grooves 446.00
96586850 371 Shaft Seal, BME 1,618.00 96405563 Pulley - motor for V-Belt, DIN 2211-SPB-250 x 5 grooves 498.00
00ID3162 373(a) Bolt, Hex Head, M8 x 30mm, BME 9.00 96405564 Pulley - motor for V-Belt, DIN 2211-SPB-250 x 6 grooves 557.00
00ID4123 374 Union, Screwed Connection, YR 8-1/8 208.00 96405565 Pulley - motor for V-Belt, DIN 2211-SPB-250 x 7 grooves 1,056.00
145984 375 Shaft, Stationary, BMT 5,262.00 96405566 Pulley - motor for V-Belt, DIN 2211-SPB-280 x 4 grooves 488.00
145848 375a Shaft, Stationary, BME 5,028.00 96405567 Pulley - motor for V-Belt, DIN 2211-SPB-280 x 5 grooves 538.00
00ID2129 377 Bolt, Hex Head, M5 x 16mm, BME 13.00 96405568 Pulley - motor for V-Belt, DIN 2211-SPB-280 x 6 grooves 614.00
140100 378 Cover, Rear, BME 876.00 96405569 Pulley - motor for V-Belt, DIN 2211-SPB-280 x 7 grooves 1,122.00
96939108 380(a) Ball Bearing, 6310/C3 Open/Open, BME 105.00 96486605 Pulley - motor for V-Belt, DIN 2211-SPB-280 x 9 grooves 1,671.00
145853 381 Spacing Pipe, Oil Pump, ø50 x 115, BME 1,033.00 96405570 Pulley - motor for V-Belt, DIN 2211-SPB-300 x 4 grooves 514.00
00ID8439 381a Bolt, Hex Allen Head, for pos.381, M6 x 14mm, BME 9.00 96405571 Pulley - motor for V-Belt, DIN 2211-SPB-300 x 5 grooves 576.00
140192 383 Pulley housing for V-Belt, DN150 x 200mm L, 7 groove BME 929.00 96405572 Pulley - motor for V-Belt, DIN 2211-SPB-300 x 6 grooves 659.00
96486606 Pulley housing for V-Belt, DN150 x 219mm L, 9 groove BME 2,842.00 96405573 Pulley - motor for V-Belt, DIN 2211-SPB-300 x 7 grooves 1,189.00
145100 387 Cover, Front, -CPL. 7 groove BME 1,880.00 96521347 Pulley - motor for V-Belt, DIN 2211-SPB-300 x 9 grooves 2,023.00
96488112 Cover, Front, -CPL. 9 groove BME 2,641.00 96443616 353a Bushing for pulley on Electric MotorType 3020, ø55mm 120.00
00ID2130 388 Bolt, Hex Head, M6 x 30mm, BME 13.00 96405643 Bushing for pulley on Electric MotorType 3020, ø60mm 120.00
96415569 Bushing for pulley on Electric MotorType 3020, ø65mm 120.00
Spare Parts - Turbine 96405666 Bushing for pulley on Electric MotorType 3535, ø60mm 293.00
142601 384 Hose, Discharge Outlet, ø300 x 1.0m, BMT 783.00 96405644 Bushing for pulley on Electric MotorType 3535, ø65mm 298.00
142602 Hose, Discharge Outlet, ø300 x 1.5m, BMT 1,158.00
142603 Hose, Discharge Outlet, ø300 x 2.0m, BMT 1,355.00 Spare Parts - V Belt
00ID3065 384a Clamp/strap, Full dia. for pos. 384 & 399, ø285 / ø320, BMT 124.00 96584500 353b V-Belt, XPB Optibelt, DN 1250mm 40.00
96892093 390 Turbine, Casing, SS, for turbine ø160 / ø138, BMT 1,921.00 96584501 V-Belt, XPB Optibelt R4, DN 1320mm 43.00
96892199 Turbine, Casing, SS, for turbine ø185 / ø163, BMT 2,179.00 96584502 V-Belt, XPB Optibelt R4, DN 1400mm 47.00
140116 391 O-Ring, for pos. 390, 392 & 399, Silcone Cord, ø660 x 10mm 129.00 96584503 V-Belt, XPB Optibelt R4, DN 1450mm 50.00
145600 392 Clamp/strap, half diameter for pos. 390 & 399, BMT 1,698.00 96584504 V-Belt, XPB Optibelt R4, DN 1500mm 52.00
00ID4112 392a Machine Bolt, Hex Head, M8 x 60mm for pos. 392, BMT 13.00 96584505 V-Belt, XPB Optibelt R4, DN 1550mm 55.00
00ID2061 392b Nut, M8 for pos. 392a. BMT 9.00 96584506 V-Belt, XPB Optibelt R4, DN 1600mm 57.00
00ID3284 392c Washer, for pos. 392a & 392b, BMT 9.00 96584507 V-Belt, XPB Optibelt R4, DN 1650mm 59.00
96892093 393 Turbine Wheel, ø160 / ø138, BMT 1,921.00 96584508 V-Belt, XPB Optibelt, DN 1700mm 62.00
140956 Turbine Wheel, ø185 / ø163, BMT 6,062.00 96584509 V-Belt, XPB Optibelt, DN 1800mm 63.00
145970 394 Tension Element for pos. 393, BMT 2,145.00 NOTE: For contents of kits, see the Grundfos Product Center.
00ID3068 394a Bolt, Hex Head, M6 x 25mm for pos. 394, BMT 35.00
140907 395 Nozzle, SS, for turbine ø4 - ø5.9mm, BMT 620.00
140957 Nozzle, SS, for turbine ø6 - ø7.9mm, BMT 637.00
140958 Nozzle, SS, for turbine ø8 - ø9.9mm, BMT 659.00
140959 Nozzle, SS, for turbine ø10 - ø11.9mm, BMT 668.00
145985 398 Distribution Pipe, SS, for turbine ø160 / ø138, BMT 7,751.00
145976 Distribution Pipe, SS, for turbine ø185 / ø163, BMT 8,857.00
BME, BMET
Service Kits
LIST
PRICE ($)
LIST
PRICE ($)
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
21
23. BME, BMET
Outline View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BME, BMET
(For position number
reference)
NOTES: Some referenced position numbers may not be available as individual items (see complete kit).
BME
BMET
For contents of kits, see the Grundfos Product Center.
22
24. BME, BMET
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BME, BMET
(For position number
reference)
Pulley Head BME
NOTES: Some referenced position numbers may not be available as individual items (see complete kit).
23
For contents of kits, see the Grundfos Product Center.
25. BME, BMET
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BME, BMET
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
24
For contents of kits, see the Grundfos Product Center.
Pulley Head BMT
28. MATERIAL
NUMBER
Piston Kits
96577088 Piston set, BMP 0,2 S 3,456.00
5 Pistons- 1 Retaining plate- 1 Retaining guide
96577089 Piston set, BMP 0,4-0,6 S 3,456.00
5 Pistons- 1 Retaining plate- 1 Retaining guide
96577122 Piston set, BMP 1,0-1,2 S 4,181.00
5 Pistons- 1 Retaining plate- 1 Retaining guide
96605256 Piston set, BMP 2,5-3,2 S 4,655.00
9 Pistons-1 Retaining plate
96605257 Piston set, BMP 6,2 -8,0 S 5,090.00
9 Pistons-1 Retaining plate
96577054 Piston set, BMP 0,3 NS 3,456.00
5 Pistons- 1 Retaining plate- 1 Retaining guide
96577055 Piston set, BMP 0,6-1,0 NS 3,733.00
5 Pistons- 1 Retaining plate- 1 Retaining guide
96577056 Piston set, BMP 1,7-2,1 NS 4,550.00
5 Pistons- 1 Retaining plate- 1 Retaining guide
96605235 Piston set, BMP 3,4-4,4 NS 6,251.00
9 Pistons-1 Retaining plate
96605236 Piston set, BMP 6,2 -8,0 NS 6,543.00
9 Pistons-1 Retaining plate
96906735 Piston set, BMP 0,6-1,0 RS 2,414.00
5 Pistons- 1 Retaining plate- 1 Retaining guide-1 O-ring set
96906737 Piston set, BMP 1,8-2,2 RS 3,452.00
5 Pistons- 1 Retaining plate- 1 Retaining guide-1 O-ring set
96906739 Piston set, BMP 5,1-8,2 RS 7,124.00
9 Pistons-1 Retaining plate- 1 O-ring set
96906740 Piston set, BMP 10,2 RS 7,129.00
9 Pistons-1 Retaining plate- 1 O-ring set
Valve Kits
96577057 Valve plate set, BMP 0,2-0,6 S and BMP 0,3-1,0 NS 1,914.00
1 Port plate-1 Valve plate- 1 O-ring set
96577082 Valve plate set, BMP 1,0-1,2 S and BMP 1,7-2,1 NS 2,278.00
1 Port plate-1 Valve plate- 1 O-ring set
96605237 Valve plate set, BMP 2,5- 3,2 S and BMP 3,4- 4,4 NS 3,199.00
1 Port plate-1 Valve plate- 1 O-ring set
96605238 Valve plate set, BMP 6,2- 8,0 S and BMP 6,2- 8,0 NS 4,071.00
1 Port plate-1 Valve plate- 1 O-ring set
96906834 Valve plate set, BMP 0,6-1,0 RS 2,016.00
1 Port plate-1 Valve plate- 1 Oring set
96906835 Valve plate set, BMP 1,8-2,2 RS 2,016.00
1 Port plate-1 Valve plate- 1 Oring set
NOTES: Kits are not stocked in the USA.
For contents of kits, see the Grundfos Product Center.
BMP
Service Kits
LIST
DESCRIPTION PRICE ($)
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
27
29. MATERIAL
NUMBER DESCRIPTION
Cylinder Kits
96577123 Cylinder barrel, BMP 0,2-0,6 S 3,183.00
1 Cylinder barrel
96577124 Cylinder barrel, BMP 1,0-1,2 S 3,363.00
1 Cylinder barrel
96605260 Cylinder barrel, BMP 2,5-3,2 S 4,071.00
1 Cylinder barrel
96605261 Cylinder barrel, BMP 6,2- 8,0 S 6,106.00
1 Cylinder barrel
96577083 Cylinder barrel, BMP 0,3-1,0 NS 3,184.00
1 Cylinder barrel
96577084 Cylinder barrel, BMP 1,7-2,1 NS 3,369.00
1 Cylinder barrel
96605239 Cylinder barrel, BMP 3,4- 4,4 NS 4,363.00
1 Cylinder barrel
96605250 Cylinder barrel, BMP 6,2- 8,0 NS 6,398.00
1 Cylinder barrel
96906841 Cylinder barrel, BMP 0,6-1,0 RS 1,959.00
1 Cylinder barrel- 1 O-ring set
96906852 Cylinder barrel, BMP 1,8-2,2 RS 2,742.00
1 Cylinder barrel- 1 O-ring set
96906854 Cylinder barrel, BMP 5,1-10,2 RS 9,748.00
1 Cylinder barrel- 1 O-ring set
Shaft Seal Kit
96577051 Shaft seal kit, BMP 0,2-0,6 S and BMP 0,3-1,0 NS 576.00
1 Shaft seal - 1 O-ring set-screws
96577053 Shaft seal kit, BMP 1,0-1,2 S and BMP 1,7-2,1 NS 606.00
1 Shaft seal - 1 O-ring set-screws
96605231 Shaft seal kit, BMP 2,5-3,2 S and BMP 3,4-4,4 NS 595.00
1 Shaft seal - 1 O-ring set-screws
96605233 Shaft seal kit, BMP 6,2-8,0 S and BMP 6,2 -8,0 NS 614.00
1 Shaft seal - 1 O-ring set-screws
96906873 Shaft seal kit, BMP 5,1-10,2 RS 2,276.00
1 Shaft seal - 1 O-ring set
NOTES: Kits are not stocked in the USA.
For contents of kits, see the Grundfos Product Center.
BMP
Service Kits
LIST
PRICE ($)
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
28
30. BMP
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
BMP
(For position number
reference)
NOTES: Some referenced position numbers may not be available as individual items (see complete kit).
29
For contents of kits, see the Grundfos Product Center.
34. • Baldor 15H and SmartMotors
• Danfoss: VLT 2800, 8000, and FC200 VFDs
• Grundfos: PFU, PMU, CU351, IO351, MLE, Multi-E, and CUE
• Components that are internal to the BoosterpaQ® control panel
• Devices configured via their own keypad: Baldor 15H and Danfoss products
• Devices configured via an external keypad: Baldor SmartMotor
• Devices configured via R100 or Grundfos Go: IO351 and MLE
• Devices configured via PC Tool E-Product & PC Tool Link: CU351, Multi-E, and CUE
Note 3: Grundfos Multi-E cards (in MLE 1 is configured via PC Tool Link and PC Tool E-products.
MLE 2-4 are configured using an R100.
MATERIAL NO. DESCRIPTION
00L51702 PFU 115V fuse 5x20 80mA 250V TD 9.00
98391186 Ultrasonic Liquid Level Switch 1,232.00
91130870 Panel key for Rittal enclosures 33.00
BoosterpaQ®
Spare Parts
To purchase the parts listed below:
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
Unconfigured parts, contact BoosterpaQ® partner services.
Configured parts, contact the Grundfos Service department.
NOTE: For Electronic tools, see Tools section.
Note 1: For the best results and fastest service, please provide the nameplate information for the
BoosterpaQ and the device of interest.
Note 2: These parts MUST be configured for BoosterpaQ operations. They can be configured in the
field or by the Grundfos Service Department for a fee.
Note 4: Configuration fee is $130 net for each unit (does not apply to warranty replacements).
Replacement Parts
LIST PRICE ($)
33
36. MATERIAL
NUMBER DESCRIPTION
CH Kits
435006 Bearing Kit, CH2/4, Models C-E-F-G-H 143.00
96586305 Shaft Seal & Gasket Kit, CH(N)2/4, AQQE/V 187.00
985848 Shaft Seal & Gasket Kit, CH2/4, AUUE/V 165.00
985737 Shaft Seal & Gasket Kit, CH2/4, RUUE/V 165.00
985164 Shaft Seal & Gasket Kit, CH2/4, CVBE/V 93.00
985751 Shaft Seal & Gasket Kit, CH2/4, CVUE/V 140.00
96586306 Shaft Seal & Gasket Kit, CH8/12, AQQE/V 193.00
96416347 Shaft Seal & Gasket Kit, CH8/12, AUUE/V 173.00
96416348 Shaft Seal & Gasket Kit, CH8/12, RUUE/V 173.00
004N5012 Shaft Seal & Gasket Kit, CH8/12, CVBE/V, Models A-B 123.00
435002 Repair Kit, CH2, 3-5 Stages 155.00
435039 Repair Kit, CH2, 6 Stages 293.00
445004 Repair Kit, CH4, 2-4 Stages 143.00
445017 Repair Kit, CH4, 5-6 Stages 294.00
004N5013 Repair Kit, CH8/12, CVBE/V, Models A-B 192.00
MATERIAL
NUMBER DESCRIPTION
CHI Kits
004H5007 Repair Kit, CHI 2/4 BQQE B-C (Sic/Sic, EPDM) 207.00
004H5008 Repair Kit, CHI 2/4 BQQV B-C (Sic/Sic, FKM) 237.00
004H5009 Repair Kit, CHI 2/4 BBUE (Carbon/Tungsten, EPDM) 168.00
004H5010 Repair Kit, CHI 2/4 BBUV (Carbon/Tungsten, FKM) 207.00
96479922 Repair Kit, CHI 2/4 BUUE (TC, TC, EPDM) 237.00
96479921 Repair Kit, CHI 2/4 BUUV (TC, TC, FKM) 263.00
004F5012 Repair Kit, CHI 8/10/12 (BQQE) (Sic/Sic, EPDM) 207.00
004F5013 Repair Kit, CHI 8/10/12 (BQQV) (Sic/Sic, FKM) 237.00
004F5019 Repair Kit, CHI 8/12 BBUE (Carbon/Tungsten, EPDM) 182.00
004F5020 Repair Kit, CHI 8/12 BBUV (Carbon/Tungsten, FKM) 222.00
96481361 Repair Kit, CHI 8/10/12 16mm BUUE (TC/TC, EPDM) 263.00
96481360 Repair Kit, CHI 8/10/12 16mm BUUV (TC/TC, FKM) 292.00
For contents of kits, see the Grundfos Product Center.
CH, CHI
Service Kits/Spare Parts
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
LIST
LIST
PRICE ($)
PRICE ($)
35
37. CH, CHN
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CH, CHN 2/4
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit). 36
38. CH, CHN
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CH, CHN 8/12
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
37
For contents of kits, see the Grundfos Product Center.
39. CHI, CHIE
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CHI, CHIE 2/4
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
38
For contents of kits, see the Grundfos Product Center.
40. CHI, CHIE
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CHI, CHIE 8/10/12
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
39
For contents of kits, see the Grundfos Product Center.
41. CHI
Exploded View
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CHI 15/20
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
40
For contents of kits, see the Grundfos Product Center.
44. MATERIAL
NUMBER DESCRIPTION
CM
Shaft Seal and Gasket Kits CM1/3/5
96932350 Shaft Seal-Gasket Kit A. CM1/3/5 AVBE/V 137.00
96932392 Shaft Seal-Gasket Kit A. CM1/3/5 AQQE/V 176.00
96932438 Shaft Seal-Gskt Kit I/G. CM1/3/5 AVBE/V 147.00
96932440 Shaft Seal-Gskt Kit I/G. CM1/3/5 AQQE/V 186.00
96932441 Shaft Seal-Gasket Kit I/G. CM1/3/5 AQQK 2,072.00
Shaft Seal and Gasket Kits CM10/15/25
96932393 Shaft Seal-Gskt Kit A. CM10/15/25 AVBE/V 150.00
96932394 Shaft Seal-Gskt Kit A. CM10/15/25 AQQE/V 207.00
96932443 Shaft Seal-Gskt Kt I/G.CM10/15/25 AVBE/V 158.00
96932445 Shaft Seal-Gskt Kt I/G.CM10/15/25 AQQE/V 215.00
96932446 Shaft Seal-Gskt Kit I/G. CM10/15/25 AQQK 2,116.00
Drain/Fill Plug Kit
96932395 Drain/Fill Plug Kit, E/V 84.00
96932396 Drain/Fill Plug Kit, K 262.00
Wear Kit
96932397 Wear Kit, Neck Ring CM1/3/5 Standard 92.00
96932447 Wear Kit, Neck Ring CM1/3/5 Cold 212.00
96932398 Wear Kit, Neck Ring CM10/15/25 Standard 97.00
96932448 Wear Kit, Neck Ring CM10/15/25 Cold 252.00
Motor Bearing Kits
96932399 Motor Brg Kit 6204,6201 CM-MG&E71/80 mtr 110.00
96932400 Motor Brg Kit 6305,6205 CM-MG(E)90 mtr 123.00
96932412 Motor Brg Kit 6306,6205 CM-MG(E)100 mtr 132.00
96932413 Motor Brg Kit 6306,6206 CM-MG(E)112 mtr 137.00
96932414 Motor Brg Kit 6308,6206 CM-MG(E)132 mtr 159.00
CM1
97690621 Impeller, CM1, A,I (304 SS), Qty of 5 62.00
97690622 Impeller, CM1, G (316 SS), Qty of 5 70.00
CM3
97690625 Impeller, CM3, A,I (304 SS), Qty of 5 65.00
97690624 Impeller, CM3, G (316 SS), Qty of 5 73.00
CM5
97690627 Impeller, CM5, A,I (304 SS), Qty of 5 66.00
97690626 Impeller, CM5, G (316 SS), Qty of 5 76.00
CM10
97690629 Impeller, CM10, A,I (304 SS), Qty of 5 96.00
97690630 Impeller, bulks of 5, CM10, G (316 SS) 120.00
CM15
97690631 Impeller, bulks(5), CM15, A,I (304 SS) 97.00
97690632 Impeller, bulks of 5, CM15, G (316 SS) 120.00
CM25
97690633 Impeller, bulks of 5, CM25, A,I 304 SS 98.00
97690634 Impeller, bulks of 5, CM25, G (316 SS) 121.00
CM
Service Kits
Impeller Kits
LIST
PRICE ($)
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
43
45. CM
Exploded Views
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CM 1/3/5
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
44
Stainless Steel
TM0435884608
46. CM
Exploded Views
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CM 1/3/5
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
45
Cast Iron
TM0435914608
47. CM
Exploded Views
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CM 10/15/25
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
46
Stainless Steel
TM0438285108
48. CM
Exploded Views
GRUNDFOS PRICE LIST
EFFECTIVE DATE: JANUARY 1, 2016
CM 10/15/25
(For position number
reference)
NOTE: Some referenced position numbers may not be available as individual items (see complete kit).
47
Cast Iron
TM0438295108
25
11