2. Getting Started
a. Power/Enter Key
b. 4 cursor keys to select/change
c. Balance Key
d. Freeze Key
e. Menu/Back Key (Charge LED)
f. User Configurable Keys
– Short Press – Selects User Choice of
Key Type
– Long Press – Brings up key function
selection menu
1
6
6
43
3
2
5
9. Left or right handed operation
Set using Screen Flip Item in either the
Appearance menu item or User settable key.
10. Auto Phase
•
An extension of Auto Lift off but can be
adjusted in terms of a) Phase Angle and
b) Trigger Threshold. So can be used for
all Phase Setting not just Lift Off
•
Visual feedback of how the process
works
•
Activated from user configured key
11. Loop
•
Records a short signal and then
repetitively plays it back
•
Gives real time adjustment of an actual
signal including balance, gain, phase,
filters and display configuration
•
Excellent for calibration set up especially
filters for rotary and dual frequency mix
•
Activated from user configured key
12. Trace
•
Stores a frozen image in black
•
Trace image is behind the live data
display
•
Excellent for comparison of
calibration with the live display
•
Activated from user configured key
13. Record & Replay
•
Recordings can be paused, rewound,
looped on short portions both on the
instrument and on a pc.
•
Also settings may be further optimised
during calibration or post test.
•
Transferred over the NET to an expert for
a second opinion.
•
Activated by selecting Record & Replay
item
14. Dual Frequency Auto Mixing
•
A mix exploits the phase and sensitivity
change between two different types of
indication to suppress one and enhance the
other.
•
Very few uses of dual frequency mixing
outside tube testing probably because of the
difficulty in setup.
•
Automatic optimisation of the XY gain and
phase makes this much simpler.
•
Activate by function within Record & Replay
15. Guides
•
Guides allow presentations to be
saved on an instrument and then
referenced before and during the
inspection.
•
Uses a universally available
Presentation Software and the
EtherCheck PC utility.