Getting Started with TDS1000B / 2000B Digital Phosphor Oscilloscope Series

554 views

Published on

To introduce the key features of TDS1000B / TDS2000B Oscilloscope and basic operations

Published in: Technology, Business
0 Comments
1 Like
Statistics
Notes
  • Be the first to comment

No Downloads
Views
Total views
554
On SlideShare
0
From Embeds
0
Number of Embeds
2
Actions
Shares
0
Downloads
0
Comments
0
Likes
1
Embeds 0
No embeds

No notes for slide

Getting Started with TDS1000B / 2000B Digital Phosphor Oscilloscope Series

  1. 1. Getting Started with TDS1000B / 2000B Digital Phosphor Oscilloscope Series <ul><li>Source: Tektronix </li></ul>
  2. 2. Introduction <ul><li>Purpose </li></ul><ul><ul><li>This training module introduces the key features of TDS1000B / TDS2000B Oscilloscope and basic operations. </li></ul></ul><ul><li>Outline </li></ul><ul><ul><li>Overview of the oscilloscope </li></ul></ul><ul><ul><li>Key features </li></ul></ul><ul><ul><li>Basic operations </li></ul></ul><ul><li>Content </li></ul><ul><ul><li>15 pages </li></ul></ul>
  3. 3. Product Overview <ul><li>Nine models </li></ul><ul><li>40MHz to 200MHz </li></ul><ul><li>Digital Real-Time sample rate </li></ul><ul><li>USB removable data storage </li></ul><ul><li>Up to four channels </li></ul><ul><li>Built-in waveform math and FET </li></ul><ul><li>Smart autoset </li></ul><ul><li>One-button operation </li></ul><ul><li>USB system connectivity </li></ul><ul><li>Multiple Language User Interface </li></ul><ul><li>and Context-sensitive Help </li></ul><ul><li>OpenChoice ™ PC communication software </li></ul>
  4. 4. Front Panel Features USB Host Port Advanced Triggers Digital Real-Time Technology Easy and Precise On-board Analysis Probe Check Wizard Simple Setup and Operation Simple User Interface
  5. 5. Side and Rear Panel Features USB Device Port Compact 124.2 mm (4.8 in) Depth Integrated Handle Integrated Security Loop and Kensington Lock
  6. 6. Setting Up the Oscilloscope <ul><li>Autoset </li></ul><ul><ul><li>Automatically adjust the vertical scale, horizontal scale and trigger settings. </li></ul></ul><ul><ul><li>Display several automatic measurements in the graticule area, depending on the signal type. </li></ul></ul><ul><li>Autorange </li></ul><ul><ul><li>Adjust setup values to track a signal </li></ul></ul><ul><li>Saving a setup </li></ul><ul><ul><li>Save the current setup if the user waits five seconds after the last change before it is powered off. </li></ul></ul><ul><ul><li>Recall this setup the next time when power is applied. </li></ul></ul><ul><li>Recalling a setup </li></ul><ul><ul><li>Recall the last setup before the oscilloscope is powered off, any saved setups, or the default setup </li></ul></ul><ul><li>Default setup </li></ul><ul><ul><li>Set up for normal operation when it is shipped from the factory. </li></ul></ul><ul><ul><li>Push the DEFAULT SETUP button to recall the default setup. </li></ul></ul>
  7. 7. Triggering <ul><li>Trigger modes – Auto, Normal, Single sequence. </li></ul><ul><li>Trigger types – Edge, Video, Pulse width </li></ul><ul><li>Steps to start an acquisition </li></ul><ul><ul><li>Acquires enough data to fill the portion of the waveform record to the left of the trigger point. </li></ul></ul><ul><ul><li>Continues to acquire data while waiting for the trigger condition to occur. </li></ul></ul><ul><ul><li>Detects the trigger condition. </li></ul></ul><ul><ul><li>Continues to acquire data until the waveform record is full. </li></ul></ul><ul><ul><li>Displays the newly-acquired waveform. </li></ul></ul>2-channel model 4-channel model
  8. 8. Acquiring Signals <ul><li>Acquisition Modes </li></ul><ul><ul><li>Sample – Use to acquire and accurately display most waveforms . </li></ul></ul><ul><ul><li>Peak Detect – Use to detect glitches and reduce the possibility of aliasing </li></ul></ul><ul><ul><li>Average - Use to reduce random or uncorrelated noise in the signal display; the number of averages is selectable </li></ul></ul><ul><li>Use the Single Sequence button to capture a single triggered acquisition sequence at a time. </li></ul><ul><li>The time base can control how often the values are digitized. </li></ul>
  9. 9. Scaling and Positioning Waveforms <ul><li>Vertical Scale and Position </li></ul><ul><ul><li>The vertical position of waveforms can be changed by moving them up or down in the display. </li></ul></ul><ul><ul><li>The waveform display will contract or expand relative to the ground reference level. </li></ul></ul><ul><li>Horizontal Scale and Position </li></ul><ul><ul><li>The HORIZONTAL POSITION control can be adjust to view waveform data before the trigger, after the trigger, or some of each. </li></ul></ul><ul><ul><li>When changing the horizontal position of a waveform, users are actually changing the time between the trigger and the center of the display. </li></ul></ul><ul><ul><li>The oscilloscope shows the horizontal scale as time per division in the scale readout </li></ul></ul>
  10. 10. Taking Measurements <ul><li>Graticule </li></ul><ul><ul><li>Able to make a quick, visual estimate. </li></ul></ul><ul><li>Cursors </li></ul><ul><ul><li>Able to take measurements by moving the cursors. </li></ul></ul><ul><ul><li>Amplitude Cursors – appear as horizontal lines on the display and measure the vertical parameters. </li></ul></ul><ul><ul><li>Time Cursors – appear as vertical lines on the display and measure both horizontal and vertical parameters. </li></ul></ul><ul><li>Automatic </li></ul><ul><ul><li>Automatic measurements use readouts to show measurement results. </li></ul></ul>
  11. 11. USB Host Port <ul><li>Save and recall waveform data or setup data, or save a screen image </li></ul><ul><li>Print a screen image </li></ul><ul><li>Transfer waveform data, setup data, or a screen image to a PC </li></ul><ul><li>Control the oscilloscope with remote commands </li></ul>
  12. 12. Connecting to a PC <ul><li>To connect the oscilloscope to the PC, follow these steps: </li></ul><ul><ul><li>Power on the oscilloscope. </li></ul></ul><ul><ul><li>Insert one end of a USB cable into the USB Device port on the back of the oscilloscope. </li></ul></ul><ul><ul><li>Power on the PC. </li></ul></ul><ul><ul><li>Insert the other end of the cable into the desired USB port on a PC. </li></ul></ul><ul><ul><li>If a Found New Hardware message appears, follow the on-screen directions for the Found New Hardware wizard. </li></ul></ul><ul><ul><li>If Windows asks you to insert a CD, click Cancel. </li></ul></ul><ul><ul><li>Run the PC Communications software on your PC. </li></ul></ul><ul><ul><li>If the oscilloscope and PC do not communicate, refer to the PC Communications online help and documentation. </li></ul></ul>
  13. 13. Connecting to a Printer <ul><li>Steps to connect to a PictBridge compatible printer: </li></ul><ul><ul><li>Insert one end of a USB cable into the USB Device port on the oscilloscope. </li></ul></ul><ul><ul><li>Insert the other end of the cable into the PictBridge port on a PictBridge compatible printer. Refer to the product documentation for your printer to locate the port. </li></ul></ul><ul><ul><li>To test the connection, set up the oscilloscope to print as described in the next procedure. </li></ul></ul>
  14. 14. Summary <ul><li>Instantly Productive </li></ul><ul><li>Incredibly Easy </li></ul><ul><li>Quick and Easy Waveform Capture </li></ul><ul><li>Flexible Data Transfer </li></ul><ul><li>Simple Documentation and Analysis </li></ul><ul><li>Lifetime warranty to long productive service </li></ul>
  15. 15. Additional Resource <ul><li>For ordering TDS1000B/TDS2000B Oscilloscopes, please click the part list or </li></ul><ul><li>Call our sales hotline </li></ul><ul><li>For additional inquires contact our technical service hotline </li></ul><ul><li>For more product information go to </li></ul><ul><ul><li>http://www.tek.com/products/oscilloscopes/tds1000_tds2000/ </li></ul></ul>

×