Blood Pressure and Heart Sounds Lab Data from practicalclinicalskills.com Patient Signs and Symptoms Blood Pressure Pulse Pressure Mean Arterial Pressure 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Heart Sounds: Patient Did you hear S1 and S2? Was there a murmur? Was there a gallop? S3? S4? 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Questions: 1. Define the first and last sounds of Korotkoff. Which sound is used to approximate systolic pressure and which sound is used to approximate diastolic pressure? 2. What are systole and diastole, relative to the contraction and relaxation of heart chambers? 3. What events cause the “lubb-dupp” heart sounds as heard with a stethoscope? 4. At the beginning of ventricular systole, the pressure in the ventricles rises until they are able to eject blood. What event must occur for ventricular ejection to proceed? 5. What has to happen to the pressure of the ventricles after ejection is complete before they can refill? What event must happen for the ventricles to refill? 6. Define pulse pressure. Explain how a low (<40mmHg) or high pulse pressure (>60mmHg) might indicate cardiovascular disease. HINT: Consider what changes in the systolic pressure would mean. 7. Define Cardiac Cycle. 8. Characterize the relationship between the electrical events and the mechanical events of the cardiac cycle. Christopher Weaver Lab3 · Downloaded the python script (create_instance.py) to my local desktop. Clicked on the file tree and opened the editor tab. The scripted populated and analyzed all lines according to lab instructions. In line 14 I inputted my key pair name associated with the EC2 instance. There was no error in line 39. Opened up Bash and ran the script “python create_instance.py” Went back to the EC2 dashboard to make sure the python instance was provisioned correctly. It states that the instance is running. Christopher Weaver Project 2 Lab 2 · Went to CloudFormation in the AWS dashboard and created new stack with designer. Dragged the VPC resource to the canvas and gave it a CIDR block of 10.0.0.0/16. Next I pulled the Internet Gateway onto the canvas and gave it a dependency relationship between the VPC and Internet Gateway. This was done by dragging the brown dot from the Internet Gateway and attaching it to the VPC. The Internet Gateway was attached by the blue dot to the VPC. I validated the template with the validation template located at the top of the screen. I then saved the template to my local desktop. · I provisioned the stack by uploading the template that I created and saved locally. I gave the stack name CCA625-P2-CPW. Once I created the stack it showed on the dashboard as created. · I verified that the new VPC was available by navigating to my VPCs in the management console. It showed in green as availab ...