This goal of this document is to provide you with all the information required to know jump starter and will inform you of the jump starter specification and proper operation procedures, safety warnings and other useful information. For more details, please visite our website: www.bestnewpower.com
2. (Long press for 3S to turn on the LED light,short
press to change other light model)
21
Thank you for choosing the Jump Starter. Before
operating your new device, please read this user manual
carefully. This manual will inform you of the jump starter
specifications and proper operation procedures,safety
warnings and other useful information.
Common Questions & Answers for Jump Starter Usage
A:Multi-functions into one unity. This product can charge mobile
phones, laptops, motorcycle, MP3/MP4 and other rechargeable
electronis products. Jump Starter has different lighting models and at
the same time, can start your cars in emergency.
Q:What functions does Jump Starter have?
Q:How to use LED lighting?
A:Turn on the main switch,long press the power button for 3 seconds
to turn on the LED light, then short press the power button to switch
SOS signal light, short press one more time for strobe light, short
press once again to turn off the light.
(LED light—SOS signal light—strobe light—OFF)
Turn on the
main switch
3. Q:How long will it take to fully charge the Jump Starter to maximum
capacity? How to charge electronic device?
A:3-4 hours. The indicator lights can indicate the battery level of it.
Turn on the main switch.Short press the power button, you will find the
indicators will be bright and you can charge your mobile phones, IPods
and laptops.
Q:How to charge the Jump Starter
A:Use the supplied AC home adapter or the DC car adapter to charge
Jump Starter.
Put the plug of the adapter into the input port 15V/1A, the other
connect to the home outlet or car outlet.(When charging, the indicator
light will be on)
Q:How to Jump Start a Vehicle Battery?
A:Make sure the battery level of Jump Starter is above 40%(At least 2
indicators lights ON).
1.The battery clip connect the drained battery of the vehicle.
2.The red clamp to the positive “+” terminal and the black clamp to
negative “-” terminal.
3.Connect the socket of Jump Starter with Blue plug of battery
clip,turn on the main switch and press the power button.
4.Now attempt to turn your car key. If the engine does not start once,
wait at least 10 seconds before attempting to start again.
5.Disconnect battery clip from jump starter socket after the engine has
been successfully started.
43
Phone,tablet USB charging portShort press the power button,before
charging electronic devices
Indicator lights
Input port
Press the power button
Ensure at least 2 indicators lights is on
Connect socket of Jump Starter with Blue plug of battery clip
Q:How long will the power of Jump Starter remain?
A:3-6 months. We suggest you recharge it every 3 months.
Turn on the main switch
Turn on the main switch
1
2
3
4. 65
Q:If the jump starter clamp terminals touch because of human
careless error, then what will happen?
A:We have circuit protection from the touch of jump starter cable
clamp positive and negative terminal. Once short circuit happens,
restorable fuse will automatically switch off, and restore after short
circuit is over .
No personal injury or property damage will happen during the whole
process.
Q:How to charge laptop with Jump Starter?
A:Turn on the main switch,choose proper adaptor and voltage output
your laptop required(e.g if your laptop requires 19V, short press power
button shift 19V model) then connect your laptop input port with proper
adaptor and cable, other side of the cable plug into Jump Starter and
short press power button.
Output port for laptopshort press power button
21
3
5 4
Red clamp connect “+”
Black clamp connect “-”
Connect the socket of
the Jump Starter
Starter the vehicle
Remove the battery clip
from car battery
Remove the blue plug
from Jump starter
Notes:
Make sure the battery level of Jump Starter is not less than 40% (At
least 2 indicator lights ON).
1.Connect red clamp to the positive “+” terminal and black clamp to the
negative “-” terminal.
2.Connect blue plug of the battery clip to the socket of Jump Starter
3.Turn your car key to start.
4.Disconnect Blue plug from the Jump Starter, then remove battery
clip from the car battery.
Vehicle emergency starting steps
Turn on the main switch
Output
USB5V
Output
ONInput
15V/1A
OFF
12V16V19V
BYGNE
START
Output
USB5V
Output
ONInput
15V/1A
OFF
12V16V19V
BYGNE
START
5. 87
1.LED illumination
2.19V voltage output indicator light
3.16V voltage output indicator light
4.12V voltage output indicator light
5.12/16/19===2A/3.5A/3.5A
Output port
6.Battery level indicators
7.Power button
8.5V=2A USB output port
9.15V=1A Input port
10.Main switch
11.Jump start socket
Product Layout Accessories
Car charger
Air compressor
Home ChargerBattery clip
Adaptors for laptop
Phone adaptors
2
3
4
5
8
11
1
6 7
9
10
Plastic box
Air pump adaptors
Needle parts for pumping
6. Special Precautions of The Jump Starter
1.Please put the blue plug of battery clip into Jump starter car
socket(port) firmly.
2.Make sure that the battery level indicator lights are not less than 2.
3.If the jump starter can not start the car, please stop it, check the
battery clips clamped firmly or not, and clean up the rust or dirt.
4. When the blue indicators doesn't work, please charge it to activate.
5.When starting 3-5 times, the car can not be started. Please stop and
check the other possible exsiting breakdown in the car. Otherwise,it
will make the jump starter broken.
6.Remove the Jump Starter and battery clip within 30s after the car is
starting on.
We do not take any responsibility for the loss caused by your
operation against the above usages
109
Toxic and Harmful Substances
The product should NOT be submerged in water, exposed to rain or
moisture.
Do NOT allow the product or accessories to get wet when in use or
storage.
Do NOT modify or disassemble the prodct.
Keep the product away and out of the reach of children at all times.
Do NOT expose the product to fire or intense heat as it may explode.
Do NOT reverse polarity connections.
Do NOT throw or apply physical shock to the product.
Keep the product away from all combustible materials such as carpet
when the product is being used.
Only charge the product at temperatures between 32 F to 140 F.
Only charge the product using the supplied charging adapters
If there are any problems with the product or malfunction occurs
during usage, immediately stop operation.
If corrosive liquid seeps from the product and comes in contact with
your eyes, immediately wash your eyes with running water and consult
with a doctor.
If corrosive liquid seeps from the product and comes in contact with
your skin, immediately wash thoroughly with soap and water.
Composition and amount of toxic and harmful
substances in the Powerall
Pb Hg Cd Cr(VI) PBB PBDE
o o o o o o
Indicates all homogeneous materials' hazardous substances content
are below the MCV limit specified in the Standard 2002/95/EC(RoHs)
o:
!
!
!
!
!
Battery capacity:12000mah
Battery life cycle:>500 times
Output:5V/2A, 12V/2A/,16V/3.5,19/3.5A
Input:15V/1A
Starting Current:300A
Peak Current:600A
Working Temperature:-20℃~80℃
Weight:440g
Jump Starter Technical Specifications
。 。
7. 1211
Compressor Strength: 18 BAR.
Power Code Length: 105" inches / 8' foot - 9" inch / 266.7 CM.
Plugs in to any Auto 12V volt Jump Starter port.
Built in pressure gauge and led light
Dimensions: 110*100*39mm
Net Weight: 0.39KG
80 PSI 12V Volt 10A Amp Air Compressor
Box Packing. Comes with 1 Adapter (1) Needle for pumping up sports balls,
(1) Pointed Nozzle Adapter for Putting air in Inflatable toys or Recreational
Devices.
Fast inflation on tires (within 8 mins)
Technical parameters:
Needle parts for pumping Air pump adaptors