Today’s DIY art crafts will show you this amazing wire bracelet idea. The more you practice making wire wrapped bracelets, the more your skills will improve.

1. Diy art crafts-extraordinary leaf-shape wire bracelet ideas
Beaded pattern bracelets seem to be one of the most
popular forms of jewelry making, especially for
beginners. However, for those who aren’t interested in
figuring out how to do complicated beadwork, you might
find beaded patterns daunting! If this is you, then you
will love this DIY art crafts showcased in this tutorial. It’s
all about wire bracelet ideas that you can easily make
yourself with just some primary techniques.
Supplies needed in wire bracelet ideas:
 1.5mm Aluminum Wire
 0.5mm Brass Wire
 4mm Cat Eye Bead
 Bead Reamer
 Side Cutting Plier
Step 1: Preparing the bracelet base.
1. Snip three segments of 1.5mm aluminum wire,
the length are 22cm, 22cm and 18cm, respectively.
Create a loop at one end with round nose plier or the
bead reamer;
Today’s DIY art crafts will show you this amazing wire bracelet idea. The more you practice making wire
wrapped bracelets, the more your skills will improve.
Instructions on the diy art crafts:
2. Take the 18cm length of wire and the 0.5mm
brass wire. Coil the brass wire around the first
piece firmly;
3. Each time wrapping about 6~8 turns, add on
one 4mm cat eye bead for embellishment;
4. Repeat the same processes to the end. Secure
the brass wire with several coiled and then snip
off any excess. Create a loop at the other end of
aluminum wire.
5. Still using the thin brass wire, wrap the
entire length of the aluminum wire leaving
enough wire at the end to create a loop.
Create loop. Repeat with second wire.

2. Once you have finished making all three pieces,
you have the three fundamental components to
create your bracelet base.
Step 2: Shape the coiled wires.
1. Pick up the two longer strips without beads
and determine the area where you want to
create the shape of the leaf;
2. Shape the part along a round object. Then,
you will get the components like the picture
below shows.
Step 3: Assemble the three
separate parts together
1. Lay the three parts on a flat surface as
picture shows;
2. Using 20cm long of brass wire, start binding
the three pieces into one and secure the wire;
3. Get another fairly long piece of brass wire,
thread one end under the central wire and
then exit upwards. Cross the two ends
tightly to fasten in place;
4. Pass the two ends through the beginning
locations from front to back;
5. Then pull the two ends upwards and cross
tightly as before;

3. 6. Thread the two ends again to the back side, and
steps 3 through 6 for the rest of the leaf.
7. After you are done, tie up the straight segment
with the remaining wire.
Step 4: Make the closure
4. Attach the clasp to the loops on the central wire,
and congratulations! You are finished!
All wire wrapped techniques utilized in this wire
bracelet idea are repeated and the finished item is
really amazing and breath-taking. Just go and collect
more diy art crafts for practicing at home. That may
be a great way to reuse old things and save your
money.
1. Once you have finished the steps above, you’ve
done most of the steps for this wire bracelet idea.
Curve the end tips of wires on opposite sides;
2. Shape your bracelet;
3. Make a handmade S-hook finding with the
aluminum wire and a reamer;
Search for a variety of wires please click:
http://www.pandahall.com/wholesale-Wire/77.html