Peplink devices and technologies can act as a complete connectivity platform for networks of IoT sensors as they are deployed both inside and outside of the enterprise.
Tech-Forward - Achieving Business Readiness For Copilot in Microsoft 365
IoT Peplink
1. Peplink as an IoT Connectivity Platform
Peplink devices and technologies can act as a complete
connectivity platform for networks of IoT sensors as they
are deployed both inside and outside of the enterprise. The
platform enables secure, centrally managed, isolated IoT
sensor overlay networks to be installed on top of existing
physical network infrastructure.
These overlay networks which are
managed and monitored centrally using
the InControl 2 cloud management
platform, provide the network layer
abstraction required to secure and
isolate IoT traffic seamlessly over local
and wide area networks.
Use any and all network connectivity
Use PepVPN for secure connectivity between devices
WAN Bonding
Combined multiple WAN links for resilience
BUILDING SECURITY
CCTV / RFID / IoT
POWER MONITORING
HVAC / IoT
HEAD OFFICE
LAN
WAN
WAN LINKS
IOT #1 VPN OVERLAY
IOT #2 VPN OVERLAY
2. Peplink as an IoT Connectivity Platform
Manage, Monitor and Control all devices using InControl 2
As the number of IoT sensor networks increase, so does the complexity of the data networks they use to
connect to each other and out to the internet. This is compounded further by the need for complex
security configurations to provide IoT sensor network isolation on the corporate LAN and WAN.
What is needed is a centralized management point, from where all devices can be monitored and
managed securely.
InControl 2 is Peplink’s cloud based management and monitoring platform. As a dedicated platform for all
Peplink devices, InControl 2 provides a single view of your entire device estate, logically organised into
parent organizations and usage groups.
Device and Wi-Fi Management
Firmware Management
Automated Configurations
Fully Automatic SpeedFusion VPN Configurations
Remote Device Administration
Beautiful Reports
MSP Ready
The right device – whatever the requirement
Peplink has the broadest product range available, with tiny devices (like the BR1 Slim) that support a
single active WAN and 150Mbps of throughput, right up to the datacenter level Balance 2500 – Multi-WAN
hardware designed for 8 Gbps of throughput, as well as virtual appliances for cloud deployments too.
Whatever the requirement, wherever it needs to be deployed, Peplink is a perfect fit, and all products are
enterprise ready and managed in one place using InControl 2.
Peplink enables the ultimate in agile IoT networks
Using Peplink devices as the internet gateway for IoT sensors and networks – in combination with
SpeedFusion VPN to secure and isolate the traffic from other corporate and public networks, provides real
enterprise grade network agility.
Not only can IoT sensors be securely deployed anywhere – using any available WAN link, but IoT network
capacity can be increased at any time too by adding additional WAN links of almost any type.
This allows for IoT networks to be deployed in rural locations over cellular, in factories using Wi-Fi and
even in the middle of the ocean using satellite, as well as more traditional locations such as homes and
businesses using fixed line connectivity with cellular backup.
With centralized and automated network configuration from InControl 2 – Peplink’s cloud based
management platform, even complex network overlays can be easily managed, visualized, monitored and
maintained.