1. Civil Engineer
OBJECTIVE
To be a part of highly competitive and dynamic team, learning exponentially. Aimed to be associated with progressive
and forward looking organization, which provides opportunity to apply my knowledge and skills towards the growth of
the organization.
ACADEMICS
B.Sc. : Civil Engineering (University of Engineering & Technology, Lahore) CGPA 3.949/4.0 2015
D.A.E : Civil Technology (PBTE, Lahore) 87.5 % 2011
Matriculation (BISE, Lahore) 70% 2007
PROFESSIONAL EXPERIENCE
Junior Engineer in National development consultants Neelum Jhelum Hydroelectric Project
September 2015 to till date
Project Details:
The Project utilizes a gross head of 420m by diverting the Neelum River at Nauseri to the lower reach of the
Jhelum River at Zimanabad through a 32.5 km long tunnel system. A concrete gravity diversion dam will be 160m
long by 60m high with 03 radial gates and a large flap gate is under construction at Nauseri on the Neelum River.
The intake structure with a capacity of 280 cumecs is located close to the diversion dam and incorporates six intake
gates, which are connected to the sedimentation basins. A diversion tunnel with a capacity of 500 cumecs is built
to carry dry season flows only around the dam foundation site. A headrace tunnel system of 28.5 km is under
construction. An underground power station having 04 units with a total maximum capacity of 963 MW is under
construction at Chatter Kalas, Muzaffarabad. 12 single phase transformers units are to be installed each 98.33
MVA at the power station. An approximate 4 km long tailrace tunnel will discharge the collected water in Jhelum
River at Zimanabad.
Responsibilities:
 To review the shop drawings in accordance with design, contract documents and technical
specifications.
 Site visits to review field change requests.
 To ensure the quality of work according to latest standards, drawings and standard procedures.
Design of a Highway Bridge Final Year Project, 2014-15
 Study of Basic components, Selection of bridge type and suitable sites for bridges
 Pre-stressing, Methods, techniques and benefits of pre-stressing
 Design and analysis of pre stressed concrete girder and deck slab in accordance with AASHTO
provisions
 Development of spread sheets for prestressed girder design (For desired proportioning of girder or
selection from AASHTO Specified girders)
 Preparation of structural drawings of deck slab, girder and 3D civil model of bridge on AutoCAD
 Bridge modeling using SAP 2000 Bridge wizard
Fatima Group of companies Internship Program, July 2014
Fatima fertilizer Plant site (FFCL), Sadiqabad
Internship activities
 Preparation of B.O.Q
 Construction of T.S.T. road,
 Site visit to Construction of Staff Colony and Masjid
 Study of FFCL policy of Risk assessment, Hazard control & its Mitigation
 Plant site visit and structural study of Prilling Tower & Cooling tower
 Study of structural drawings
Phone: +92-313-4010390
Email:h.a_waqas@yahoo.com
Permanent Address: Ahmed pura Bhikhi road street Babu Manzoor
Hussain near Master Noor Muhammad Ijaz house Dist. Sheikhupura
HAFIZ AHMED WAQAS

2.  Study of geotechnical report of the project
 Maintenance and repair of different structural components subjected to environmental & Chemical
degradation
Teaching experience 2012-2015
 Lecturer at NCBA&E university (December 2013 to August 2015)
 Worked as an Instructor in Lahore poly technique institute of technology, Ravi road
campus Lahore. (September 2012 to November 2014)
Taught various subjects
Surveying and
leveling
Quantity Surveying Highways, Roads
and Bridges
Concrete and steel
structures
etc.
INDUSTRIAL VISITS

Visit to Power house site C3 of Neelum Jhelum Hydroelectric project, Muzaffarabad in December 2015
 Visit to construction of underpass Lahore surghoda road and Gujranwala road, Sheikhupura in Augest 2015
 Construction of New Khanki Barrage, Wazirabad in March 2015
Construction of Girls Hostel at F.C College, Lahore in June 2014
 Attended Survey camp held by U.E.T Lahore, Abbotabad in May 2014
Nandipur Hydraulics Research Station, Nandipur, Gujranwala in March 2014
Visit to AFCO Steel manufacturing industry, Lahore Sheikhupura road, Sheikhupura in February 2014
SEMESTER PROJECTS
 Concrete Mix design & its Work sheet development
 Design and detailing of Multistorey building using E-TABs & SAFE along with manual design comparison
 Design and Drawings of Residential buildings
 Design of footings
 Design of Truss roof system
 Design of Prestressed concrete girder bridge
 Deign of Slab bridge
 Design of Truss bridge
 Pile design
 Design of Pavements using California bearing ratio (CBR) method
 Flexible and Rigid pavement design using various methods
 Design of a barrage.
 Design of surface irrigation system.
 Design of cross drainage works
 Design of Well.
 Design of water supply scheme and sewerage system for a residential colony.
 Development of civil engineering related software using Visual Basic (Beam & slab design etc.)
 Development of work sheets for different structural components (Slabs, Beams, Columns, Footing, Retaining
Wall, Stairs, etc.)
 Physical Modeling of University Automotive Centre
 3D Modeling of residential building using AutoCAD
TECHNICAL SKILLS
 Good command over design and Analysis of structures
 Preparation of B.O.Q
 Good understanding of Structural drawings
 Time management
 Can do approach, Self-motivated and have ability to work under stress.
 Leadership skills and an effective team member too.
 Risk manager, habitual challenge accepter.
 Have Vision to initiate new ideas and to implement innovative techniques through strategic approaches.

3. COMPUTER PROFICIENCY
 Structure Analysis Program (SAP 2000),
 Extended 3D Analysis of Building Systems (ETABS),
 Slab Designing by Finite Element Method (SAFE),
 Automatically Computer Aided Drafting/Designing (AutoCAD 2D,3D)
 Microsoft Excel, Microsoft word, Microsoft power point,
 Visual basic,
 Adobe Acrobat,
 Microsoft Project, Primavera P6,
 Environmental Protection Agency Networks (EPA.NET),
 LinPro (Program for static and dynamic analysis of plane frames)
 MD solid
 Blue beam.
 Keen interest in Excel work sheets development and software on VB,
 Distinct Report writing Skills
CO-CURRICULAR ACTIVITIES
 Participant of “Student of the Year” competition of the department of University of engineering and
technology Lahore Pakistan, Got Second position.
 Member of SKPIANFRAME Society for local student career counseling and support.
 Honorary Faculty member of NCBA&E University LCU-Campus Lahore (for Engineering and
Technology) and ALI Institute of technology and textile Sheikhupura.
 Active member of Muhammadia Social Welfare Society Sheikhupura (Society for local community
welfare).
 Conduct career counseling workshops and ran marketing campaigns for DAE students
ACHIEVEMENTS
 Winner of Six Gold medals from U.E.T Lahore, 2015
 1st position in Civil Engineering department of U.E.T Lahore, 2015
 Got recruited on merit for current JOB at NDC, 2015
 Entitled for Dean’s Honor roll in all 8 semesters, U.E.T Lahore, 2011-2015
 Leader of best surveyor group of Survey camps, conducted by U.E.T. Lahore, 2014
 Stood Second in student of the year competition organized by civil engineering department of
U.E.T Lahore, 2015
 Entitled for departmental merit Scholarship, U.E.T. Lahore, 2013
 Received PEEF Scholarship for degree program as an achievement of Diploma of Associate
Engineering, Govt. Of Punjab, 2012
 Award of Overall 1st position of Diploma Of Associate Engineering in Dist. SHEIKHUPURA,
Ali Institute of Technology and Textile Sheikhupura, 2011
 Won Computer system for the first position in the Diploma of Associate Engineering, Ali Institute
of Technology and Textile Sheikhupura, 2011
 Achieved merit scholarship for All three academic years of Diploma of Associate Engineering.,
Ali Institute of Technology and Textile Sheikhupura, 2008-2011
 Got 1st
position in District Gymnastic tournament Sheikhupura, Govt. Islamia High School, 2006-
2007
INTERESTS
Wonders of civil Engineering| Bridges | Teaching Technical subjects | Software learning | Reading
Finding problem solutions | Travelling | Gymnastic.
REFERENCES
Professor Dr. Habib Ur Rehman
Head of Hydraulics & Irrigation Engineering Division
Email: mughalhabib@uet.edu.pk
 Further references will be furnished on demand