2. Transmission & Distribution Power Grid Solutions
Ingeteam is a global leader in
Transmission & Distribution
solutions for a digital, sustainable
and efficient Power Grid
FACTS &
STORAGE
POWER GRID
AUTOMATION
ELECTRIC
MOBILITY
3. ELECTRICAL
POWER GRID
Centralized and distributed
power generation
Increase in power demand
Intermittent renewable
power generation
Multi-directional power flow
Consumption integrated
in system operation
Sustainability and
decarbonization goals
We need appropriate solutions to achieve
flexible, reliable, sustainable and secure grids
RENEWABLE INTEGRATION
▪ STATCOM
▪ SYNCON
▪ POWER AUTOMATION
▪ SSSC
▪ POWER AUTOMATION
▪ SYNCON
TRANSMISSION
▪ STATCOM
▪ POWER FLOW
▪ POWER AUTOMATION
DISTRIBUTION
▪ DISTRIBUTION AUTOMATION
SECONDARY DISTRIBUTION
ELECTRIC MOBILITY
▪ CHARGING POINTS
4. STATCOM: Static synchronous
compensator
Energy Storage (BESS)
Static Synchronous Series
Compensation (SSSC)
Flexible Power Connection
Unified Power Flow Controller
Synchronous Condenser
(SYNCON)
INGETEAM BESS INDARCOM™
INGEGRID™ STATCOM INGEGRID™ PFLOW
FACTS & STORAGE
Flexibility Technology Solutions that provide power
control to improve grid stability and quality.
FACTS optimize the power transfer capability of the
AC systems and harness the full potential of
renewable energy generation with the minimum
environmental footprint.
Reduced system losses
and increased productivity
Fast return on investment
Reduced maintenance costs
and extended plant life
Increased capacity of the energy
transmission and distribution grid
Compliance with grid connection codes
for solar and wind farms
5. INDARCOM™
Synchronous Condenser Solution
The solution based on Synchronous Condenser (SYNCON) generates the short-circuit
power, inertia and reactive power necessary to adapt to the needs of the client.
System Strength
Short Circuit Rate ensures
safe protection systems
required for Low Voltage
Ride Through (LVRT)
recovery from faults
Voltage Control
Stable operation during
normal condition through
reactive power adjustment
Inertia
Supports the rate of
change of frequency
(RoCoF)
Voltage & Frequency
Regulation
Instantaneous Grid
Stabilization that
prevent blackouts
Up to
130 MVAr
1,200 MVA Scc
900 MWs
6. INDARCOM™
Scope of Supply
Basic Scope (BS)
▪ Synchronous Condenser
▪ Starter (Pony motor & VDF)
▪ AVR (Indargrid™)
▪ Cooling System
▪ Lubrication System
▪ Control & Protection System
▪ Low Voltage Distribution
Extended Scope (ES)
▪ Generator Circuit Breaker
▪ Isolated Phase Bus Bars
▪ Auxiliary Transformer
▪ Step-Up Transformer
Synchronous
Compensator (BS)
Exciter (BS)
Starting Equipment
(Pony Motor) (BS)
Fin Fan Cooler +
Pumping Unit (BS)
(Cooling System)
Lub-Oil Skid (BS)
(Lubrication system)
Generator Circuit
Breaker (ES)
Auxiliary
Transformer
Step-Up Transformer
(ES)
Control System of the
Unit (BS)
Layout
footprint
dimensions:
25
*
40
m
Low voltage
distribution (BS)
AVR (Indargrid™
& VFD) (BS)
Comprehensive
control system for
the whole installation
Isolated Phase
Bus Duct (ES)
7. INGEGRID™
STATCOM
The INGEGRID™ STATCOM solution is a fast-acting system capable of injecting reactive power
and regulating the voltage at the appropriate power. It enhances the stability of the electric
system and permits to maximize the active power transmission capacity.
Reactive power
Instantaneous reactive power
compensation, both inductive
and capacitive. Constant
reactive power capacity, even
under low voltage conditions.
Voltage Control
It allows the network to work
at a constant voltage
eliminating harmonics and
unbalanced loads.
Consequently, losses are
reduced, and the life of the
plant is extended.
Compliance with
national grid codes.
Avoid penalties.
Grid Code
From
±100 kVAr
to
±80 MVAr
8. Why STATCOMS?
INGEGRID™
New grid code requirements
▪ Higher Reactive Power requirements
▪ Negative Sequence Reactive Current
requirements
Power quality
▪ Contributes to minimize Flicker
▪ Can contribute to compensate
Harmonics
▪ Good ally for friendly grid integration
Voltage compensation
▪ Contributes to boost grid voltage under
distorted conditions (heavy
consumptions & weak grids)
▪ Minimize permanent voltage unbalance
9. INGETEAM BESS
Storage
Ingeteam STORAGE solution supplies energy to the grid during peak periods of demand, covering
solutions from 100 kW to hundreds of MW. It’s suitable both for small plants for end users and for large
applications such as utilities or industrial companies.
Possibility of
Behaving as STATCOM
Both applications in one
single system
Inertial Response
Provide inertial response for
system reliability much more
efficiently
Portability
This makes it resizable
and easier to relocate
Voltage & Frequency
Regulation
Instantaneous Grid
Stabilization that
prevent blackouts
Independent from
Storage Technology
▪ Li-Ion batteries
▪ High temperature
▪ Super-capacitors
▪ Lead acid
10. Why Energy Storage?
INGEGRID™
Load Leveling / Time Shifting
Store energy during off-peak times and
delivering it during periods of high demand.
Smooth out the delivery of intermittent
resources such as wind and solar.
Peak Shaving
Reduce the peak demand in areas where
loads are fluctuating.
Load Balancing
Balancing power consumption and
generation for an enhanced grid stability.
Energy storage can inject/extract power as
needed to match load.
Capacity Firming
Keep the output power of a renewable
source at a predefined level for a period of
time. Backup power during disruptions.
Grid Forming
Generate an AC grid for stand-alone or hybrid
grids (backup services, grid outages, supply
to critical loads, black-start).
Enhanced Frequency Regulation
AC grids enhanced frequency regulation and
spinning reserve services.
Power Quality
Enhanced Grid Power Quality: voltage
support STATCOM, harmonics… Ancillary
services also on the grid as the reactive
control to adjust the power factor.
Emissions Reduction
Optimization of diesel consumption in hybrid
systems: micro-grids, islands.
11. INGEGRID™
Power Flow Solutions
Integrated power flow control solutions that improve the efficiency and the quality of the
electrical supply.
Avoid Line overload
Redirects a part of the overflow to
other less loaded parallel routes
More Efficient Transmission Systems
Managing existing infrastructures
Reduction of Operating Costs
Power supply should not be increased
in order to cover the demand
Integrated power flow control solutions that improve the
efficiency and the quality of the electrical supply.
▪ Static Synchronous Series Compensation (SSCC)
systems allows you to vary the impedance of electrical
lines to control the power flow through them.
▪ Flexible Power Connection (FPL) allows
transmission lines with the same or different voltage
levels, angle or even frequency to be interconnected.
▪ Unified Power Flow Controller is a combination of
STATCOM and SSSC coupled via a common DC bus to
both devices.
12. INGEGRID™
Power Flow Solutions
Improve customer service and reduce
outage time
Active and reactive power flow control
Facilitates the increase in the capacity of
a grid to accommodate additional
generation
Provides additional connection requests
on already saturated grids
Maintains stable voltage and frequency in
the island created, independently of the
rest of the circuits
13. What do we offer?
Engineering and consulting
Power converter
Control equipment: SCADA, PLC, RTU
UPS and ancillary services cabinet
Air-conditioning system
Fire warning and detection system
Grid connection elements: transformer,
switchgear
Enclosure / container
14. POWER GRID AUTOMATION
Solutions that digitize, control and protect
the state of the electrical grid in order to
maintain the continuity of the power supply
and a real time monitoring of the system
RTU and SCADA
solutions
Protection & Control Distribution Grid
Automation
15. The INGESYS™ control solutions enable acquisition and management of grid data and parameters to identify situations,
detect potential risks and react appropriately, thereby prolonging the service life of grid components and resources.
INGESYS™
RTU & SCADA Solutions
Substation SCADA
Real time supervisory
Control and Data
Acquisition Systems
Graphical representation
of data and measurements
Engineering Tools
RTU/Gateway
Allows integration
and connection to the
main telecontrol centers
System setup, analysis
and maintenance software
16. INGEPAC™
Protection and Control
The INGEPAC™ relay product range comprises fully programmable multifunctional IEDs according to the IEC
61850 standard, for control and protection applications in high and medium voltage electrical substations.
IEC 61850 Compliance
▪ Interoperability
▪ PRP/HSR Redundancy
▪ MMS & GOOSE
messaging
▪ Acquisition of Sampled
Values (MSV)
Protection models for
all applications
• Line Distance
• Line Differential
• Transformer Differential
• Shunt Reactors
• Busbar Protection
• Multifunction
• Bay Control Unit
• Breaker Management
• Feeder Protection
• Capacitor Banks
Cybersecurity
▪ Web access
▪ HTTPS, sFTP
▪ Firewall
▪ Password
▪ User roles
Data Acquisition
▪ SOE
▪ Fault reports
▪ 0.2 class accuracy
measures
▪ DFR
▪ Quality data
17. INGEPAC™
Distribution Automation
The INGEPAC™ DA product range carries out all the automation, measurement supervision, and remote
control for Medium Voltage systems
Recloser / LBS
Controllers
Benefits
• Rapidly and automatically
minimizes the number of
customers affected by a
power outage
• Fault location
• Fault isolation
• Improves reliability of
supply quality indicators:
SAIDI, SAIFI…
• Reduces maintenance costs
RMU / Secondary
Switchwear Automation
18. Dual units for normal and
semi-fast charging
Multi-standard
fast charging points
Ultra-fast charging points
Multi-standard
ultra-fast charging station
ELECTRIC VEHICLE CHARGERS
A complete range of INGEREV®
charging stations for the e-vehicles
of today and tomorrow.
The range of e-vehicle charging stations,
is available in AC and DC and
supports all types of charging powers
and installation types.
19. INGEREV™
AC CHARGING STATIONS
The FUSION range is available in two models, for ground mounting and Wall for wall mounting. This dual equipment
range has been designed to cover all electric vehicle charging demands in public and private settings alike
▪ Public and Private Installations
▪ Mounting
Floor and wall mountable models, suitable for
outdoor installation.
▪ Communications
Ethernet and WiFi communications
▪ Latest Technology
Latest generation advanced functions such as
Dynamic Load Management 2.0 (DLM 2.0)
and OCPP
2,3 kW
to
22 KW
20. INGEREV™
DC CHARGING STATIONS
RAPID series are the fast and ultra-fast charging points within that compliant with the highest quality standards and
that offers the best performance in terms of power management, communications, reliability and efficiency
50 kW
120 to 180 kW
200 to 400 kW
▪ Ideal for service stations and
fleets with high rotation
▪ One or two cables in DC charging
mode
▪ Charging points compatible with
CCS and CHAdeMO
▪ Allow the simultaneous charging
of up to three vehicles
▪ Remote communication
capabilities via Ethernet and 4G
▪ TFT multi-language touch display
21. WHY INGETEAM?
PRODUCT RANGE
We offer a
comprehensive range of
proven and reliable
electrical equipment for
many sectors
WORLDWIDE
We have manufacturing
facilities and service
centers strategically
located in Europe, Asia,
and North/South
America to deliver the
most efficient support
and service
R&D
We are committed to
the innovation,
research and
development of full
in-house technology
EXPERIENCE
We have 20+ GW of
installed power
capacity worldwide and
50 years of experience
in the industry
FLEXIBILITY
Our engineering teams
can provide you with
flexible solutions
tailored to meet all
your project needs
PARTNERSHIP
We are partners,
providing you active
support for each
specific project
throughout the entire
product life cycle