varita mágica para armar

1. Apply glue to the glue tabs. Align the two sides of the
star, leaving the hole (for the wand handle). Affix the glue
tabs a to the interior edge of the opposite side b .
a
a
b
b
3
© 2007 Hewlett-Packard Development Company
4Fold the star together to give it shape.
The dark blue-dashed interior lines
indicate mountain folds, the light blue
interior lines indicate valley folds.
1 Score: Using a metal ruler as a guide, run
the backside of a butter knife along all of
the dashed lines.
GETTING STARTED
Time to Complete: Approximately 45 minutes Level: Medium
6 Fold and roll together 3-4 times
along the fold lines at the left side.
This folded section will give you
something to tightly wrap the rest
of the handle around.
ASSEMBLE YOUR PRINCESS WAND
What you’ll need to
complete the Princess Wand:
• Scissors or X-ACTO knife
• Metal-edged ruler (optional)
• Butter knife
• Cutting mat (optional)
• Multipurpose glue
ASSEMBLY INSTRUCTIONS
2 Using scissors or an X-ACTO knife and cutting
mat, cut out wand pieces on solid lines.
5 Apply glue along the long edge of the
unprinted (or back) side of the right edge
of the paper (opposite the pattern, not
the edge with the fold lines).
glue
glue
7 Tightly curl the rest of the paper around the folded section
and adhere glued section when you come to the end.
8 Apply glue to the small sections at the
opening of the star. Insert the handle into
the star and let the glue dry.
Wave your
Princess Wand
with grace!
The curled cylinder should be no wider than 1/4 inch.

2. PRINCESS WAND
©2007 Hewlett-Packard Development Company
glue
glue
glue
glue
glue
glue
glue
glue
glue
glue