VIP Call Girls in Cuttack Aarohi 8250192130 Independent Escort Service Cuttack
H A Rogers
1. H A Rogers
State Certified Welder
TWIC card holder
Federal Way, WA 98003
206-276-4938
253-878-2799 msg
har969@yahoo.com
Work Experience
Welder
McDowells/Pile King
Kent, WA
February-May 2016
Welded on End caps of over 2,000 21' 6 inch pipe.
Ground out the end of the pipe to remove Galvanized coating,
then fit up the end caps and welded caps.
Finished up the job on time.
Welder/Repair
Stabbert Yaght and Ship
Ballard, WA
January, February 2016
Fit and Lay out Steel repair on cruise ship, via Wire feed and some rod, as well
as shell plates.
Welder/Fitter, Pipe Fitter
Fishing vessels in for repair from Alaska
Everett, WA
May 2015-August 2015
Replaced the old oil tank. Removed the rusted out tank and built a new one.
Repaired the fishing vessel with fresh steel, replaced the fuel pipe. Repaired
quite a bit on the two vessels in timely manner and able to complete the task at
hand with limited supervision.
Puglia Engineering
Tacoma, WA
January, February 2015
Repair rusted out and broken Metal on Container Vessels at both ports in Seattle
and Tacoma, in a timely manner consistent with the shipping schedule of the
vessel.
FCAW, SMAW, carbon arc, measuring tools, grinders.
Welder
Universal Steel Fabrication
Tacoma, WA
July 2014-December 2014
Welded out parts such as staircases, both steel and aluminum for various
companies. FCAW, GMAW, Aluminum both tig and wire feed, some fitting, burning,
and scarfing, blueprint reading.
Welder/Fitter
Machinists, Inc.
Seattle, WA
June 2013-February 2014
Fabricated parts for companies, i.e. Boeing, U.S. Navy, Genie etc. utilizing
blueprints, measuring devices, forklifts, cranes, carbon arc, torch, and welding
FCAW, SMAW and GMAW.
Welder/Fitter
Bradken/Atlas
2. Tacoma, WA
January -May 2013
Welding and Carbon arcing work in a foundry setting. Repaired steel/stainless
steel castings of the imperfections by arcing out area, cleaning the arc
(grinding), the re-welding and re-arcing.
Welder/Fitter
Totem Steel
Woodinville, WA
October 2012-December 2012
Read blueprints and then fabricated product according to design. Carbon steel
Flux Core and Mig welding. Carbon Arc, Oxy torch, Spot Welder, Hole Puncher,
various machines, forklift, and measuring devices. Ability to follow directions
and listen/learn.
Welder
Labor Ready (Trident Shipyards Tacoma)
Tacoma, WA
December 2011-March 2012
Weld FCAW and carbon arc inserts. Weld in pipe through bulkheads SMAW (6010,
7018). Weld combing and inserts in engine bilges. Pipe fitting and pipe
welding.
Welder/Fitter, PipeFitter/Welder
Northlake Shipyard
(HYDTEC, LLC)
Ballard, WA
November-December 2011
Weld new deck plating, fitting , Pipe Welding, Pipe Fitting, Welded in Shell
plating. Installed plating in engine room. FCAW, SMAW (7018, 6010). Pipe
Cutter, Measuring tools, trisquare, torch, carbon arc.
Welder
Pacific Fisherman Shipyard
Ballard, WA
September 2010- September 2011, 2012 and 2013
Fishing Vessel Repair replacing bulkhead parts, decks, removing and installing
zincs measuring out
Replacement parts. Cutting using torch and track burner, tacking in and welding
out, using dual shield, SMAW, innersheild, and aluminum welding
Welder
Todd's Pacific Shipyard
Seattle, WA
April August 2010
Metal Fabrication on water going vessel by tacking in replacement bulkheads,
decks (parts of the two), welding using dual shield FCAW, SMAW, ceramic, and
gouging out the weld using carbon arc, refilling the gouge and maintaining
watertight integrity, forklift, man lift and overhead crane operator, exposure
to TIG welding
Welder/Fitter combo/QC Assistant
Martinac Shipbuilding
Tacoma, WA
Jan 2009 - August2009
Welding using dual shield in addition to stick (6010, 7010, 11018, 309), Carbon
Arc
Fitting using blue prints, measuring devices, cranes, ratchet jacks, and torch
Maintaining Quality Control with air tank testing and dye penetrant, fixing any
discrepancies
Welder/Fitter
Mini Marine Industries
Tacoma, WA
3. December 2008 - Present
Ship fitting (Metal Fabrication) using Carbon Arc, Torch and Arc Welder
CSR
World Class Communications
Seattle, WA
March 2007 - August 2007
Solved problems through communications via telephonic equipment and computer
software application in a timely manner
Education
South Seattle Community College -WABO Certified April 2010. Currently, working
on 6G. (PIPE)
SMAW and FCAW ALL POSITIONS - Welding
Everett Community College - Flagger Certification July 2008
Tacoma Community College - Associate Degree in Accounting - June 2001
Tacoma Community College - Bookkeeping Certificate - June 2000
TWIC card holder 2012
References Available upon request