F2 d410

BIBLIOGRAPHY 6 - 1
6 BIBLIOGRAPHY
The most up-to-date list of references can be found at http://www.itascacg.com.
Abazovic, E., and A. Amon. “A Practice Oriented Modified Linear Elastic Constitutive Model
for Fire Loads and Its Application in Tunnel Construction,” in FLAC and Numerical Modeling
in Geomechanics – 2003 (Proceedings of the 3rd International FLAC Symposium, Sudbury,
Ontario, Canada, October 2003), pp. 313-319. R. Brummer et al., eds. Lisse: Balkema (2003).
Abazovic, E., andG.Pintar. “DimensioningandStabilityAnalysisofSegmentalTunnelLiningsUn-
dergoing Changes in the Stress Conditions,” in FLAC and Numerical Modeling in Geomechanics
(Proceedings of the International FLAC Symposium, Minneapolis, Minnesota, September 1999),
pp. 287-292. C. Detournay and R. Hart, eds. Rotterdam: A. A. Balkema (1999).
Addis, M. A., et al. “Slotted Boreholes for Improved Well Stability and Sand Management,” in CD
Proceedings of Alaska Rocks 2005 – Rock Mechanics for Energy, Mineral and Infrastructure
Development in the Northern Regions (University of Alaska-Anchorage, June 2005), paper no.
ARMA/USRMS 05-789. G. Chen et al., eds. ARMA, University of Alaska-Fairbanks (2005).
Ahmadi, M., K.GoshtasbiandR.Ashjari. “NumericalAnalysesofMasjed-E-SoleimanPowerhouse
Cavern, Iran,” in The Second Half Century of Rock Mechanics (11th Congress of the International
Society for Rock Mechanics, Lisbon, Portugal, July 2007), Vol. 2, pp. 951-954. L. Ribeiro e
Sousa, C. Olalla and N. Grossmann, eds. London: Taylor & Francis Group (2007).
Ahmadi, M., H. M. D. Niasar and M. R. Bidgoli. “Time-Dependent Behavior of Rock Foundation
by Laboratory and Numerical Modeling in Gotvand Dam,” in Rock Mechanics: Meeting Society’s
Challenges and Demands (1st Canada-U.S. Rock Mechanics Symposium, Vancouver, Canada,
May 2007), Vol. 2: Case Histories, pp. 771-776. E. Eberhardt et al., eds. London: Taylor &
Francis Group (2007).
Albert, L. F., E. Nicolini and P. Di Natale. “Piles Reinforced Soil below a Raft Foundation,”
in FLAC and Numerical Modeling in Geomechanics (Proceedings of the International FLAC
Symposium, Minneapolis, Minnesota, September 1999), pp. 427-433. C. Detournay and R. Hart,
eds. Rotterdam: A. A. Balkema (1999).
Alejano, L. R., and E. Alonso. “Considerations of Dilatancy Angle in Rocks and Rock Masses,”
Int. J. Rock Mech. Min. Sci., 42, 481-507 (2005).
Alejano, L. R., and E. Alonso. “Subsidence Prediction with FLAC,” in FLAC and Numerical
Modeling in Geomechanics (Proceedings of the International FLAC Symposium, Minneapolis,
Minnesota, September 1999), pp. 225-232. C. Detournay and R. Hart, eds. Rotterdam: A. A.
Balkema (1999).
Alejano, L. R., et al. “Back-Analysis of a Rockburst in a Swallow Gypsum Room and Pillar
Exploitation,” in Proceedings of the 9th ISRM Congress on Rock Mechanics (Paris, France,
1999), Vol. 2, pp. 1077-1080. G. Vouille and P. Berest, eds. Rotterdam: A. A. Balkema (1999).
FLAC Version 8.0

6 - 2 User’s Guide
Alexandris, A. P., M. T. Amparioti and A. N. Pavlou. “Numerical Analysis of a Large Underground
Cavern Constructed with the Central Drift Method,” in Numerical Modeling in Geomechanics –
2006 (CD Proceedings of the 4th International Symposium, Madrid, Spain, May 2006), paper no.
02-07. R. Hart and P. Varona, eds. Minneapolis, Minnesota: Itasca Consulting Group Inc. (2006).
Ali, A. Y., and S. M. Bradshaw. “Effect of Grain Size and Thermo-Mechanical Properties of
Minerals on Strength Reduction of Binary Ores Subjected to Microwave Radiation,” in SHIRMS
2008 (Proceedings of the 1st Southern Hemisphere International Rock Mechanics Symposium,
Perth, Western Australia, September 2008), Vol. 2, pp. 85-97. Y. Potvin et al., eds. Nedlands,
Western Australia: Australian Centre for Geomechanics (2008).
Almirall, J., et al. “Movimientos en la boveda de un tunel carretero de gran seccion sostenido por
metodo Bernold en pizzarras sericiticas,” in Towards New Worlds in Tunnelling, pp. 1019-1026.
Vietez-Utesa and Montanez-Cartaxo, eds. Rotterdam: A. A. Balkema (1992).
Alonso, E., L. R. Alejano and F. Varas. “Observations on Bifurcation and Localization Phenomena
around an Excavation with FLAC,” in Numerical Modeling in Geomechanics – 2006 (CD Pro-
ceedings of the 4th International Symposium, Madrid, Spain, May 2006), paper no. 08-08. R.
Hart and P. Varona, eds. Minneapolis, Minnesota: Itasca Consulting Group Inc. (2006)
Alonso, E., et al. “Ground Response Curves for Rock Masses Exhibiting Strain-Softening Be-
haviour,” Int. J. Num. & Analy. Meth. Geomech., 27, 1153-1184 (2003).
Andrade, C., et al. “Radomiro Tomic Secondary Heap Leach Facility,” in Slope Stability in Surface
Mining, pp. 427-434. W. A. Hustrulid, M. K. McCarter and D. J. A. Van Zyl, eds. Littleton,
Colorado: SME (2000).
Andrianopoulos, K. I., A. G. Papadimitriou and G. D. Bouckovalas. “Applications of the NTUA-
SAND Model for the Seismic Liquefaction Analysis of Geostructures,” in Continuum and Distinct
Element Modeling in Geomechanics – 2011 (Proceedings of the 2nd International FLAC/DEM
Symposium, Melbourne, Australia, February 2011), paper no. 13-01, pp. 709-718. D. Sainsbury
et al., eds. Minneapolis: Itasca International Inc. (2011).
Andrianopoulos, K. I., A. G. Papadimitriou and G. D. Bouckovalas. “Implementation of a Bounding
Surface Model for Seismic Response of Sands,” in Numerical Modeling in Geomechanics – 2006
(CD Proceedings of the 4th International Symposium, Madrid, Spain, May 2006), paper no.
Andrieux, P., et al. “FLAC Numerical Simulations of Tunneling through Paste Backfill at Brunswick
Mine,” in FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings of the 3rd Inter-
nationalFLACSymposium, Sudbury, Ontario, Canada, October2003), pp. 197-204. R.Brummer
et al., eds. Lisse: Balkema (2003).
Antilla, P. “UndergroundRepositoryforLow-andIntermediate-LevelRadioactiveWasteatLoviisa,
Finland,” in Proceedings of the Eighth International Congress on Rock Mechanics (Tokyo, Japan,
September, 1995), Vol. I, pp. 43-46. T. Fujii, ed. Rotterdam: A. A. Balkema (1995).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 3
Antonov, D. “Development of the Retaining Wall Concept for Backfilled Stope Using Finite
Difference Codes FLAC and FLAC3D,” in Numerical Modeling in Geomechanics – 2006 (CD
Proceedings of the 4th International Symposium, Madrid, Spain, May 2006), paper no. 02-10.
R. Hart and P. Varona, eds. Minneapolis, Minnesota: Itasca Consulting Group Inc. (2006).
Arab, M. G., E. J. Kavazanjian and N. Matasovic. “Nonlinear Time-Domain Analysis of a Sliding
Block on a Plane,” in Proceedings of the 5th International Conference on Recent Advances in
Geotechnical Earthquake Engineering and Soil Dynamics and Symposium in Honor of Professor
I. M. Idriss (San Diego, California, May 2010), paper no. 4.08b. S. Prakash, ed. Rolla: Missouri
University of Science and Technology (2010).
Arunakumari, G., and G. Madhavi Latha. “Effect of Joint Parameters on the Stress-Strain Response
of Rocks,” in The Second Half Century of Rock Mechanics (11th Congress of the International
Arunakumari, G., and G. Madhavi Latha. “Numerical Prediction of Stress-Strain Response of
Jointed Rocks,” in Continuum and Distinct Element Modeling in Geo-Engineering (Proceedings
of the 1st International FLAC/DEM Symposium, Minneapolis, Minnesota, August 2008), paper
no. 06-04. R. Hart, C. Detournay and P. Cundall, eds. Minneapolis: Itasca Consulting Group Inc.
(2008).
Asche, H. R. “The Choice of Mesh Size for Accuracy in Elastoplastic Tunnel FLAC Analyses,”
FLAC and Numerical Modeling in Geomechanics (Proceedings of the International FLAC Sym-
posium, Minneapolis, Minnesota, September 1999), pp. 293-299. C. Detournay and R. Hart, eds.
Rotterdam: A. A. Balkema (1999).
Attar, I. H., and K. Fakharian. “Effect of Reinforcement Characteristics on Seismic Response of
Geosynthetic-Reinforced Soil Bridge Abutments,” in Sea to Sky Geotechnique (CD Proceedings of
the 59th Canadian Geotechnical Conference & 7th Joint CGS/IAH-CNC Groundwater Specialty
Conference Specialty Conference, Vancouver, Canada, October 2006), pp. 132-139, paper no.
0132-139 (2006).
Avar, B. B., N. Hudyma and M. Karakouzian. “Porosity Dependence of the Elastic Modulus of
Lithophysae-Rich Tuff,” Int. J. Rock Mech. & Min. Sci., 40, 919-928 (2003).
Avar, B.B., S.WilsonandN.Hudyma. “AModelingAttempttoDeterminetheRelationshipbetween
Macroporosity and Deformation Modulus of Tuff,” in Sea to Sky Geotechnique (CD Proceedings of
the 59th Canadian Geotechnical Conference & 7th Joint CGS/IAH-CNC Groundwater Specialty
Conference, Vancouver, Canada, October 2006), pp. 510-514, paper no. 071-75 (2006).
Badie, A., and M. C. Wang. “Stability of Underground Cavity Subjected to Surface Loads,”
in Proceedings of the International Symposium on Unique Underground Structures (Denver,
Colorado, June 1990), Vol. 1, Ch. 8, pp. 8-1 to 8-18. Denver: CSM Press (1990).
Baraize, E., et al. “Loading of a Geotextile Reinforced Structure National Scale Tests,” in Ren-
contres 95, Géotextiles et Géomembranes (Beaune, France, September, 1995), pp. 86-92. Ph.
Delmas and J. P. Gourc, eds. Paris: Comité Francais pour les Géotextiles et Géomembranes (1995).
FLAC Version 8.0

Barani, S., P. Bazzurro and F. Pelli. “A Probalistic Method for the Prediction of Earthquake-Induced
Slope Displacements,” in Proceedings of the 5th International Conference on Recent Advances in
I. M. Idriss (San Diego, California, May 2010), paper no. 4.31b. S. Prakash, ed. Rolla: Missouri
Barbero, M., M. Bonini and M. Borri-Brunetto. “Numerical Modeling of the Mechanical Behaviour
of Bimrock,” in The Second Half Century of Rock Mechanics (11th Congress of the International
Barla, G. “Lessons Learnt from the Excavation of a Large Diameter TBM Tunnel in Complex
Hydrogeological Conditions,” in GeoEng 2000 (Proceedings of the International Conference on
Geotechnical & Geological Engineering, Melbourne, Australia, November 2000), invited paper,
Vol. 1, pp. 938-995. Lancaster, Pennsylvania: Technomic Publishing (2000).
Barla, G., and M. Barla. “Numerical Simulation of Squeezing Behavior in Tunnels,” in FLAC
and Numerical Modeling in Geomechanics – 2001 (Proceedings of the 2nd International FLAC
Conference, Lyon, France, October 2001), pp. 323-328. D. Billaux et al., eds. Rotterdam:
Balkema (2001).
Barla, G., M. Barla and M. Bonini. “Characterisation of Italian Clay Shales for Tunnel Design,”
in special issue of Int. J. Rock Mech. Min. Sci., 41(3), Paper No. 1B 05A (April). Proceedings
of the ISRM SINOROCK2004 symposium (Three Gorges Project Site, China, May 2004). J. A.
Hudson and X.-T. Feng, eds. (2004).
Barla, G., M. Barla and A. Perino. “Pavoncelli Tunnel Case Study,” in ROCKENG 09 – Rock
EngineeringinDifficultConditions(Proceedingsofthe3rdCANUSRockMechanicsSymposium
/ 20th Canadian Rock Mechanics Symposium, Toronto, Canada, May 2009), paper no. 4149. M.
Diedrichs and G. Grasselli, eds. (2009).
Barla, G., M. Bonini and G. Cammarata. “Stress and Seepage Analyses for a Gravity Dam on
a Jointed Granitic Rock Mass,” in Numerical Modeling of Discrete Materials in Geotechnical
Engineering, Civil Engineering & Earth Sciences (1st International UDEC/3DEC Symposium,
Bochum, Germany, September 2004), pp. 263-268. H. Konietzky, ed. Leiden: Balkema (2004).
Barla, G., and E. Chiriotti. “Insights into the Behaviour of the Large Deep-Seated Gravitational
Slope Deformation of Rosone, in the Piemont Region (Italy),” Felsbau, 13(6), 425-432 (1995).
Barla, G., et al. “Continuum and Discontinuum Modelling of a High Rock Cut,” in Technology
Roadmap for Rock Mechanics (Proceedings of the 10th Congress of the ISRM, Johannesburg,
South Africa, September 2003), Vol. 1, pp. 79-84. Johannesburg: SAIMM (2003).
Barla, M. “Numerical Simulation of the Swelling Behaviour around Tunnels Based on Special
Triaxial Tests,” Tunn. Undergr. Sp. Tech., 23, 508-521 (2008).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 5
Barneich, J., et al. “Walnut Canyon Dam Seismic Performance Evaluation,” in Geotechnical
Earthquake Engineering and Solid Dynamics (GEESD IV, Sacramento, California, May 2008),
CD Proceedings, Geotechnical Special Publication No. 181, paper no. 181. D. Zeng, M. Manzari
and D. R. Hiltunen, eds. New York: ASCE (2008).
Bastani, S. A., and B. L. Kutter. “Numerical Modeling of Seepage-Induced Liquefaction and
Slope Failure,” in FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings of
the 3rd International FLAC Symposium, Sudbury, Ontario, Canada, October 2003), pp. 91-97.
R. Brummer et al., eds. Lisse: Balkema (2003).
Bathurst, R. J., et al. “Full-Scale Performance Testing and Numerical Modeling of Reinforced Soil
Walls,” in Landmarks in Earth Reinforcement (Proceedings of the International Symposium on
Earth Reinforcement, Fukuoka, Kyushu, Japan, November 2001), Vol. 2, pp. 3-28. H. Ochiai et
al., eds. Rotterdam: A. A. Balkema (2002).
Bathurst, R. J., and K. Hatami. “Earthquake Response Analysis of Reinforced-Soil Walls Using
FLAC,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the International
FLAC Symposium, Minneapolis, Minnesota, September 1999), pp. 407-415. C. Detournay and
R. Hart, eds. Rotterdam: A. A. Balkema (1999).
Bathurst, R. J., and K. Hatami. “Influence of Reinforcement Properties on Seismic Response
and Design of Reinforced Soil Retaining Walls,” presented at The 51st Canadian Geotechnical
Conference, Edmonton, October 1998.
Bathurst, R. J., and K. Hatami. “Influence of Reinforcement Stiffness, Length and Base Condition
on Seismic Response of Geosynthetic Reinforced Retaining Walls,” in Proceedings of the Sixth
International Conference on Geosynthetics (Atlanta, Georgia, March 1998), Vol. 2, pp. 613-616
(1998).
Bathurst, R. J., and K. Hatami. “Numerical Study of the Influence of Base Shaking on Rein-
forced Soil Retaining Walls,” in Geosynthetics ‘99 (Proceedings of the Conference, Boston, Mas-
sachusetts, April 1999), Vol. 2, pp. 963-976. Roseville, Minnesota: Industrial Fabrics Association
International (1999).
Bathurst, R. J., and K. Hatami. “Seismic Response Analysis of a Geosynthetic-Reinforced Soil
Retaining Wall,” Geosynthetics Int., 5(1-2), 127-166 (1998).
Bathurst, R. J., and S. Zarnani. “Numerical Modeling of EPS Seismic Buffers,” in Geomechanics
in the Emerging Social & Technological Age (CD Proceedings of the 12th IACMAG Conference,
Goa, India, October 2008), paper no. A53. Toronto: X-CD Technologies Inc. (2008).
Beaty, M. H., and P. M. Byrne. “A Synthesized Approach for Modeling Liquefaction and Displace-
ments,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the International
Benko, B., and D. Stead. “The Frank Slide: A Reexamination of the Failure Mechanism,” Can.
Geotech. J., 35, 299-311 (1998).
FLAC Version 8.0

Benmebarek, S., and N. Khezzar. “Improvement of the Modified Cam-Clay Model for Overcon-
solidated Soils,” in FLAC and Numerical Modeling in Geomechanics – 2001 (Proceedings of the
2nd International FLAC Conference, Lyon, France, October 2001), pp. 3-6. D. Billaux et al.,
Berchenko, I. ThermalLoadingofaSaturatedRockMass: FieldExperimentandModelingUsing
Thermoporoelastic Singular Solutions. Ph.D. Thesis, University of Minnesota (April 1998).
Berchenko, I., C. Detournay and E. Detournay. “Solution of Thermoplastic Problems Using FLAC,”
Berger, D. J., and M. Laurenti. “Mine, Community and Agencies Rely on Numerical Modeling
to Assess Sensitivity of Highwall Movement,” in Pacific Rocks 2000: Rock around the Rim
(Proceedings of the 4th North American Rock Mechanics Symposium, Seattle, Washington,
July-August 2000), pp. 547-560. J. Girard et al., eds. Rotterdam: A. A. Balkema (2000).
Berger, D. J., and M. Laurenti. “Numerical Modeling Used to Assess Highwall Movement at
Homestake Mine,” in Trends in Rock Mechanics (Proceedings of Sessions of Geo-Denver 2000,
Denver, Colorado, August 2000). Geotechnical Special Publication No. 102, pp. 164-179. J. F.
Labuz, S. D. Glaser and E. Dawson, eds. Reston, Virginia: ASCE (2000).
Billaux, D., et al., eds. FLAC and Numerical Modeling in Geomechanics – 2001 (Proceedings
of the 2nd International FLAC Conference, Lyon, France, October 2001). Rotterdam: A. A.
Balkema (2001).
Billaux, D., E. Foerster and E. Antoinet. “Modelling of Soil-Geotextile Interaction for Waste
Disposal,” in Geomechanics 96 (Proceedings of the International Conference, Roznov, Czech
Republic, November 1996), pp. 259-263. Z. Rakowski, ed. Rotterdam: A. A. Balkema (1997).
Bishop, R., L. Babendererde and B. Candia. “Segment Design for a Main Sewer Project under
Earthquake Influence and High Exposition Class Using Fibre Reinforced Concrete,” in Tunnel Vi-
sion Towards 2020 (Proceedings of the ITA-AITES 2010 World Tunneling Congress, Vancouver,
Canada, May 2010), paper no. fin00029. (2010).
Blümling, P., and H. Konietzky. “Calibration and Verification of a Constitutive Law for Opalinus
Lay – Results from Laboratory and In-Situ Tests,” in 2nd Colloquium of Rock Mechanics – Theory
and Practice. Mitteilungen für Ingenierurgeologie und Geomechanik der TU Wien, Vol. 6, pp.
88-95 (2004).
Board, M. “Examination of the Use of Continuum versus Discontinuum Models for Design and
Performance Assessment for the Yucca Mountain Site,” U.S. NRC, NUREG/CR-5426, August
1989.
Board, M. FLAC (Fast Lagrangian Analysis of Continua) Version 2.20. U.S. NRC NUREG/CR-
5430, October 1989.
FLAC Version 8.0

BIBLIOGRAPHY 6 - 7
Board, M., et al. “Comparative Analysis of Toppling Behaviour at Chuquicamata Open-Pit Mine,
Chile,” Trans. Instn. Min. Metall., Sec. A, 105, A11-A21 (January-April 1996).
Boidy, E., A. Bouvard and F. Pellet. “Back Analysis of Time-Dependent Behaviour of a Test Gallery
in Claystone,” Tunn. & Underground Space Tech., 17, 415-424 (2002).
Bonini, M., M. Barla and G. Barla. “FLAC Applications to the Analysis of Swelling Behavior in
Tunnels,” in FLAC and Numerical Modeling in Geomechanics – 2001 (Proceedings of the 2nd
International FLAC Conference, Lyon, France, October 2001), pp. 329-333. D. Billaux et al.,
Boone, S. J., and J. L. Carvalho. “Estimation of Ground Deformation in Soft Soils: Comparison
of Non-Linear Numerical and Analytical Solutions for the Amsterdam North-South Metroline,” in
NARMS-TAC 2002: Mining and Tunnelling Innovation and Opportunity, Vol. 2, pp. 1611-1618.
R. Hammah et al., eds. Toronto: University of Toronto Press (2002).
Boukpeti, N., and A. Drescher. “Non-associative Models in FLAC,” in FLAC and Numerical
Balkema (1999).
Boukpeti, N., and A. Drescher. “Undrained Biaxial Response of Superior Sand Model,” in FLAC
Conference, Lyon, France, October 2001), pp. 7-13. D. Billaux et al., eds. Rotterdam: A. A.
Balkema (2001).
Boulanger, R. W. “Sand Plasticity Model for Nonlinear Seismic Deformation Analyses,” in Pro-
ceedings of the 5th International Conference on Recent Advances in Geotechnical Earthquake
Engineering and Soil Dynamics and Symposium in Honor of Professor I. M. Idriss (San Diego,
California, May 2010), paper no. IMI 6. S. Prakash, ed. Rolla: Missouri University of Science
and Technology (2010).
Bourdeau, C. “Site Effects Study in the Las Colinas Slope (El Salvador, 2001),” in Numerical
ModelinginGeomechanics–2006(CDProceedingsofthe4thInternationalSymposium, Madrid,
Spain, May 2006), paper no. 04-09. R. Hart and P. Varona, eds. Minneapolis, Minnesota: Itasca
Consulting Group Inc. (2006).
Bozzano, F., et al. “Numerical Modelling of Earthquake-Induced Rock Landslides: The 1783
Scilla Case-History (Southern Italy),” in Proceedings of the 5th International Conference on
Recent Advances in Geotechnical Earthquake Engineering and Soil Dynamics and Symposium
in Honor of Professor I. M. Idriss (San Diego, California, May 2010), paper no. 4.25b. S.
Prakash, ed. Rolla: Missouri University of Science and Technology (2010).
Brady, B., and L. Lorig. “Analysis of Rock Reinforcement Using Finite Difference Methods,”
Computers and Geotechnics, 5(2), 123-149 (1988).
FLAC Version 8.0

Brady, T. M., and J. C. Johnson. “Comparison of a Finite-Difference Code to a Finite-Element Code
in Modeling an Excavation in an Underground Shaft Pillar,” in Numerical Models in Geomechanics
(Proceedings of NUMOG III, Niagara Falls, Canada, May 1989), pp. 608-619. London: Elsevier
Applied Science (1989).
Brandshaug, T. “Stability of Disposal Rooms during Waste Retrieval,” U. S. Nuclear Regulatory
Commission, NUREG/CR-5335, March 1989.
Brandshaug, T. “Variation of Heat Loading for a Repository at Yucca Mountain,” U.S. NRC,
NUREG/CR-5428, September 1989.
Brandshaug, T., et al. “Jämförelse Av Strategier För Analys Av Bergförstärkning Med Numeriska
Modeller (Comparison of Strategies for Analysis of Ground Support Using Numerical Models),” in
Bergmekanikdag 2004 (Presentations from Rock Mechanics Day, March 17, 2004), pp. 53-66.
Stockholm: SveBeFo (2004).
Brandshaug, T., P. Solseng and P. Schiller. “A 2D Approach to the Evaluation of the 3D Effects of
Landslide Stabilization Using Piles,” in Foundations and Ground Improvement (Proceedings of
a Special Conference, Virginia Polytechnic University, June 2001, Geotechnical Special Publi-
cation No. 113), pp. 130-144. T. L. Brandon, ed. Reston, Virginia: ASCE (2001).
Bray, J. D., and S. Dashti. “Liquefaction-Induced Movements of Buildings with Shallow Founda-
tions,” in Proceedings of the 5th International Conference on Recent Advances in Geotechnical
Earthquake Engineering and Soil Dynamics and Symposium in Honor of Professor I. M. Idriss
(San Diego, California, May 2010), paper no. OSP 2. S. Prakash, ed. Rolla: Missouri University
of Science and Technology (2010).
Brown, E. T. Block Caving Geomechanics (The International Caving Study I, 1997-2000).
University of Queensland, JKMRC Monograph Series in Mining and Mineral Processing, Vol. 3.
Indooroopilly, Australia: JKMRC (2003).
Brox, D. R., and H. Hagedorn. “Prediction of In-Situ Stresses Based on Observations and Back
Analyses: Piora-Mulde Exploratory Tunnel, Gotthard Base Tunnel Project,” in Prediction and
Performance in Rock Mechanics & Rock Engineering (Proceedings of the ISRM International
Symposium EUROCK ’96, Turin, Italy, September 1996), Vol. 2, pp. 1047-1052. G. Barla, ed.
Brox, D. R., H. Konietzky and F. Rummel. “In-Situ Stress Measurements Using Hydraulic Frac-
turing in Jointed Rock in Hong Kong,” in Geotechnical Rise – Identification, Evaluation and
Solutions (Proceedings of the 6th Australia – New Zealand Conference on Geomechanics,
Christchurch, February 1992), pp. 231-235. Christchurch, New Zealand: New Zealand Ge-
omechanics Society (1992).
Brummer, R., et al., eds. FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings
of the 3rd International FLAC Symposium, Sudbury, Ontario, Canada, October 2003). Lisse:
Balkema (2003).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 9
Brummer, R. K., P. P. Andrieux and C. P. O’Connor. “Stability Analyses of Undermined Sill Mats for
Base Metal Mining,” in FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings of
Bu, S. “Seismic Evaluation of Concrete Gravity Dams Using FLAC,” in FLAC and Numerical
Modeling in Geomechanics – 2001 (Proceedings of the 2nd International FLAC Conference,
Lyon, France, October 2001), pp. 39-46. D. Billaux et al., eds. Rotterdam: A. A. Balkema (2001).
Buchet, G., and A. Van Cotthem. “3D ‘Steady State’ Numerical Modeling of Tunneling and
Compensation Grouting,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of
the International FLAC Symposium, Minneapolis, Minnesota, September 1999), pp. 255-261.
C. Detournay and R. Hart, eds. Rotterdam: A. A. Balkema (1999).
Bugden, A., and J. Cassie. “Tensile Roof Failure Arising from Horizontal Compressive Stress
and Geological Slips,” in Ground Control in Mining (Proceedings of the 22nd International
Conference, Morgantown, West Virginia, August 2003), pp. 195-202. S. S. Peng et al., eds.
Morgantown, West Virginia: West Virginia University, Department of Mining Engineering (2003).
Bullen, F., and N. Preson. “Extending the Use of the Nottingham Asphalt Tester,” in Proceedings
of the 7th International Conference on Asphalt Pavements, pp. 35-44. Nottingham: Int. Soc.
Asphalt Pavements, 1992.
Burcin Avar, B., S. Wilson and N. Hudyma. “A Modeling Attempt to Determine the Relation-
ship between Macroporosity and Deformation Modulus of Tuff,” in Sea to Sky Geotechnique
(CD Proceedings of the 59th Canadian Geotechnical Conference & 7th Joint CGS/IAH-CNC
Groundwater Specialty Conference Specialty Conference, Vancouver, Canada, October 2006),
pp. 510-514, paper no. 071-75 (2006).
Bureau, G., T. O. Keller and S. W. McClelland. “Nonlinear Seismic Analysis of Sweetwater Main
Dam,” in Technologies to Enhance Dam Safety and Environment (Proceedings of the 25th USSD
Conference, SaltLakeCity, Utah, June2005), pp. 367-384. Denver: U.S.SocietyonDams(2005).
Bureau, G., A. E. Velasco and A. Spichiger Blumel. “Seismic Design of Stage IV Raising Los
Leones Dam, Chile,” ASDSO Newsletter, 15-22 (1994).
Bureau, G. J. “Use of FLAC for Seismic Analysis of Concrete Gravity Dams,” in Numerical
Burghignoli, A., S. Miliziano and F. M. Soccadato. “Effectiveness of Fast-Flow Algorithm: 2D
Consolidation Benchmark and Tunneling Application,” in FLAC and Numerical Modeling in
Geomechanics – 2001 (Proceedings of the 2nd International FLAC Conference, Lyon, France,
October 2001), pp. 345-352. D. Billaux et al., eds. Rotterdam: A. A. Balkema (2001).
FLAC Version 8.0

Burlingame, M. J. “Determination of Aquifer and Aquitard Properties by Inverse Hydromechan-
ical Modeling,” in Continuum and Distinct Element Numerical Modeling in Geo-Engineering
(Proceedings of the 1st International FLAC/DEM Symposium, Minneapolis, Minnesota, August
2008), paper no. 03-01. R. Hart, C. Detournay and P. Cundall, eds. Minneapolis: Itasca Consulting
Group Inc. (2008).
Burlingame, M. J., D. Egin and W. B. Armstrong. “Technical Note: Unit Weight Determination
of Landfill Waste Using Sonic Drilling Methods,” J. Geotech. Geoenviron. Eng., 133(5), 609-612
(2007).
Burlingame, M. J., A. M. Fouda and R. D. Hart. “Modeling of Landfill Stability with Vertical Barrier
Walls: A Practical Example Using Limit Equilibrium and Numerical Methods,” in Geotechnical
Engineering in the Information Technology Age (CD Proceedings of Geocongress 2006, Atlanta,
Georgia, February-March 2006). D. J. DeGroot et al., eds. Reston, Virginia: ASCE (2006).
Button, E., et al. “Spatial Relationships between Discontinuity Orientation and System Behavior
in Underground Excavations,” in Golden Rocks 2006 – 50 Years of Rock Mechanics, Colorado
School of Mines (Proceedings of the 41st U.S. Rock Mechanics Symposium, June 2006), paper
no. 06-957. D. P. Yale et al., eds. ARMA (2006).
Bye, A. R., and F. G. Bell. “Stability Assessment and Slope Design at Sandsloot Open Pit, South
Africa,” Int. J. Rock Mech. & Min. Sci., 38, 449-466 (2001).
Bye, A. R., C. A. Jermy and F. G. Bell. “Slope Optimisation and Review of the Geotechnical
Conditions at Sandsloot Open Pit,” in Proceedings of the 9th ISRM Congress on Rock Mechanics
(Paris, France, 1999), Vol. 1, pp. 77-82. G. Vouille and P. Berest, eds. Rotterdam: A. A. Balkema
(1999).
Byrne, P. M., E. Naesgaard and M. Seid-Karasi. “Analysis and Design of Earth Structures to Resist
Seismic Soil Liquefaction,” in Sea to Sky Geotechnique (CD Proceedings of the 59th Canadian
Geotechnical Conference & 7th Joint CGS/IAH-CNC Groundwater Specialty Conference Spe-
cialty Conference, Vancouver, Canada, October 2006), pp. 1-24 (2006).
Byrne, P.M., S.S.ParkandM.Beaty. “SeismicLiquefaction: CentrifugeandNumericalModeling,”
in FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings of the 3rd International
FLAC Symposium, Sudbury, Ontario, Canada, October 2003), pp. 321-331. R. Brummer et al.,
eds. Lisse: Balkema (2003).
Byrne, P. M., and M. Seid-Karbasi. “Seismic Stability of Impoundments,” in Geotechnical Engi-
neering for Geoenvironmental Applications (Proceedings of the 17th Vancouver Geotechnical
Society Symposium, Vancouver, Canada, May 2003), pp. 77-84 (2003).
Caceres, C., et al. “Effect of Backfill on Open Stope Design,” in Golden Rocks 2006 – 50 Years
of Rock Mechanics, Colorado School of Mines (Proceedings of the 41st U.S. Rock Mechanics
Symposium, June 2006), paper no. 06-1132. D. P. Yale et al., eds. ARMA (2006).
Cai, M. “Influence of Stress Path on Tunnel Excavation Response – Numerical Tool Selection and
Modeling Strategy,” Tunn. Undergr. Sp. Tech., 23, 618-628 (2008).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 11
Cai, M., et al. “FLAC/PFC Coupled Numerical Simulation of AE in Large-Scale Underground
Excavations,” Int. J. Rock Mech. Min. Sci., 44, 550-564 (2007).
Cai, M., et al. “Study on Optimum Design of High and Steep Slope in Deep-Depressed Open Pit
Mine,” in SINOROCK 2009 – Rock Characterization, Modelling and Engineering Design Meth-
ods (CD Proceedings of the ISRM-Sponsored International Symposium on Rock Mechanics,
University of Hong Kong, China, May 2009). J. Hudson et al., eds. (2009).
Cai, M., P. K. Kaiser and C. D. Martin. “Quantification of Rock Mass Damage in Underground
Excavations from Microseismic Event Monitoring,” Int. J. Rock Mech. & Min. Sci., 38, 1135-1145
(2001).
Cai, M., P. K. Kaiser and C. D. Martin. “Rock Mass Softening due to Damage Quantified by Micro-
seismicity,” FLAC and Numerical Modeling in Geomechanics (Proceedings of the International
Cala, M., and J. Flisiak. “Complex Geology Slope Stability Analysis by Shear Strength Reduction,”
in FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings of the 3rd International
FLAC Symposium, Sudbury, Ontario, Canada, October 2003), pp. 99-102. R. Brummer et al.,
eds. Lisse: Balkema (2003).
Cala, M., and J. Flisiak. “Slope Stability Analyses with FLAC and Limit-Equilibrium Methods,” in
FLAC and Numerical Modeling in Geomechanics – 2001 (Proceedings of the 2nd International
FLAC Conference, Lyon, France, October 2001), pp. 111-114. D. Billaux et al., eds. Rotterdam:
A. A. Balkema (2001).
Cala, M., J.FlisiakandA.Tajdus. “SlopeStabilityAnalysiswithFLACin2Dand3D,”inNumerical
Cala, M., and M. Kowalski. “Reinforced Slope Stability Analysis with FLAC,” in Continuum and
Distinct Element Numerical Modeling in Geo-Engineering (Proceedings of the 1st International
FLAC/DEM Symposium, Minneapolis, Minnesota, August 2008), paper no. 01-06. R. Hart, C.
Detournay and P. Cundall, eds. Minneapolis: Itasca Consulting Group Inc. (2008).
Cala, M., and A. Tajdus. “The Influence of Roof Bolts Locations on Its Interaction with the
Rock Mass,” in GeoEng 2000 (Proceedings of the International Conference on Geotechnical
& Geological Engineering, Melbourne, Australia, November 2000), Paper UW0955. Lancaster,
Pennsylvania: Technomic Publishing (2000).
Calabrese, M., and P. Monaco. “Analysis of Stresses Induced in an Old Deep Tunnel by Pile Driving
from the Surface,” in FLAC and Numerical Modeling in Geomechanics – 2001 (Proceedings of
the 2nd International FLAC Conference, Lyon, France, October 2001), pp. 199-204. D. Billaux
et al., eds. Rotterdam: A. A. Balkema (2001).
FLAC Version 8.0

Callisto, L., F. M. Soccodato and R. Conti. “Analysis of the Seismic Behaviour of Propped Re-
taining Structures,” in Geotechnical Earthquake Engineering and Solid Dynamics (GEESD IV,
Sacramento, California, May 2008), CD Proceedings, Geotechnical Special Publication No. 181,
paper no. 144. D. Zeng, M. Manzari and D. R. Hiltunen, eds. New York: ASCE (2008).
Cardozo, N., and F. Cuisiat. “Fault Propagation Folding Modeling with FLAC,” in Continuum and
Carlson, G., and R. Golden Jr. “Initiation, Growth, Monitoring and Management of the 7210 Cave
at Henderson Mine – A Case Study,” in MASSMIN 2008 (5th International Conference on Mass
Mining, Luleå, Sweden, June 2008), pp. 97-106. H. Schunnesson and E. Nordlund, eds. Luleå:
Division of Mining & Geotechnical Engineering, Luleå University of Technology (2008).
Carpegna, M., et al. “Influences Du Relief et de la Tectonique Pour la Previson Des Etats de Con-
traintes Sous Fort Recouvrement,” in Proceedings of the 9th ISRM Congress on Rock Mechanics
(Paris, France, 1999), Vol. 2, pp. 1137-1142. G. Vouille and P. Berest, eds. Rotterdam: A. A.
Balkema (1999).
Carranza-Torres, C. “Dimensionless Charts for the Evaluation of the Elasto-Plastic Response of
Tunnels in Rock,” in NARMS-TAC 2002: Mining and Tunnelling Innovation and Opportunity,
Vol. 2, pp. 1133-1143. R. Hammah et al., eds. Toronto: University of Toronto Press (2002).
Carranza-Torres, C. “Elasto-Plastic Solution of Tunnel Problems Using the Generalized Form of
the Hoek-Brown Failure Criterion,” in special issue of Int. J. Rock Mech. Min. Sci., 41(3), Paper
No. 2B 28 (April). Proceedings of the ISRM SINOROCK2004 symposium (Three Gorges Project
Site, China, May 2004). J. A. Hudson and X.-T. Feng, eds. (2004).
Carranza-Torres, C. Self-Similarity Analysis of the Elasto-Plastic Response of Underground
Openings in Rock and Effects of Practical Variables. Ph.D. Thesis, University of Minnesota
(1998).
Carranza-Torres, C., et al. “Elasto-Plastic Analysis of Deep Tunnels in Brittle Rock Using a Scaled
Form of the Mohr-Coulomb Failure Criterion,” in NARMS-TAC 2002: Mining and Tunnelling
Innovation and Opportunity, Vol. 1, pp. 283-293. R. Hammah et al., eds. Toronto: University of
Toronto Press (2002).
Carranza-Torres, C., andC.Fairhurst. “Elasto-PlasticAnalysisofEllipticalCavitiesinRockSubject
to Non-Hydrostatic Loading,” in FLAC and Numerical Modeling in Geomechanics (Proceedings
of the International FLAC Symposium, Minneapolis, Minnesota, September 1999), pp. 215-223.
Carranza-Torres, C., and C. Fairhurst. “A General Stability Criterion for Tunnels in Soft and Hard
Ground,” in Tunnels for People (Proceedings of the 23rd General Assembly of the International
Tunnelling Association, April 1997), pp. 29-35. J. Golser et al., eds. Rotterdam: A. A. Balkema
(1997).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 13
Carranza-Torres, C., and C. Fairhurst. “Some Consequences of Inelastic Rock-Mass Deformation
on the Tunnel Support Loads Predicted by the Einstein and Schwartz Design Approach,” in Trends
in Rock Mechanics (Proceedings of Sessions of Geo-Denver 2000, Denver, Colorado, August
2000), Geotechnical Special Publication No. 102, pp. 16-49. J. F. Labuz, S. D. Glaser and E.
Dawson, eds. Reston, Virginia: ASCE (2000).
Carranza-Torres, C., C. Fairhurst and L. Lorig. “Insights on the Stability of Large Excavations
from Analytical and Numerical Models,” Felsbau, 15(1), 45-63 (1997).
Carranza-Torres, C., and J. Zhao. “Analytical and Numerical Study of the Effect of Water Pressure
on the Mechanical Response of Cylindrical Lined Tunnels in Elastic and Elasto-Plastic Porous
Media,” Int. J. Rock Mech. Min. Sci., 46, 531-547 (2009).
Cassani, G., and L. Mancinelli. “Two-Dimensional Analysis of Large Diameter Structural Piles,”
in Numerical Modeling in Geomechanics – 2006 (CD Proceedings of the 4th International Sym-
posium, Madrid, Spain, May 2006), paper no. 05-11. R. Hart and P. Varona, eds. Minneapolis,
Minnesota: Itasca Consulting Group Inc. (2006).
Castellani, A., and M. Valente. “Underground Tunnels in a Seismic Zone,” in Numerical Mod-
eling in Geomechanics – 2006 (CD Proceedings of the 4th International Symposium, Madrid,
Castillo, J., et al. “Non-linear Dynamic Analysis of Heap Leach Pad Under High Phreatic Levels,”
Castro, A. T., and J. V. Lemos. “Back Analysis in the Interpretation of Concrete Dam Foundation
Behavior,” in Geoecology and Computers (Proceedings of the 3rd International Conference on
Advances of Computer Methods in Geotechnical and Geoenvironmental Engineering, Moscow,
Russia, February 2000), pp. 191-198. S. A. Yufin, ed. Rotterdam: A. A. Balkema (2000).
Celada, B., J. M. Galera and P. Varona. “Development of a New Calibration and Interpretation
Procedure of Pressuremeter Tests to Obtain Elastic Parameters,” in The Pressuremeter and Its New
Avenues (Proceedings of the 4th International Symposium, May 1995), pp. 265-272. Rotterdam:
Chandler, N., and D. Martin. “The Influence of Near Surface Faults on In-Situ Stresses in the
Canadian Shield,” in Rock Mechanics Models and Measurements: Challenges from Industry
(Proceedings of the 1st North American Rock Mechanics Symposium, The University of Texas
at Austin, June 1994), pp. 369-376. P. Nelson and S. Laubach, eds. Rotterdam: A. A. Balkema
(1994).
Chandler, N. A., E. T. Kozak and C. D. Martin. “Connected Pathways in the EDZ and the Potential
for Flow among Tunnels,” in Proceedings of the EDZ Workshop: Designing the Excavation
Disturbed Zone for a Nuclear Repository in Hard Rock. J. B. Martino and C. D. Martin, eds.
Toronto: 1996 Int. Conf. on Deep Geological Disposal of Radioactive Waste (1996).
FLAC Version 8.0

Chang, J., J. M. Scott and C. Pound. “Numerical Study of the Heathrow Cofferdam,” in FLAC
Balkema (2001).
Chang, J. C., J. J. Liao and Y. W. Pan. “Bearing Behavior and Failure Mechanism of a Shallow
Foundation Located on/behind the Crest of a Poorly Cemented Artificial Sandstone,” Int. J. Rock
Mech. Ming. Sci., 45, 1508-1518 (2008).
Chang, S.-H., C.-I. Lee and Y.-K. Lee. “An Experimental Damage Model for Predicting the Non-
linear Behavior of Rock,” in Technology Roadmap for Rock Mechanics (Proceedings of the 10th
Congress of the ISRM, Johannesburg, South Africa, September 2003), Vol. 1, pp. 195-198.
Johannesburg: SAIMM (2003).
Chen, S., et al. “Modeling of the Indirect Tensile Test for Inhomogeneous Granite Using a Digital
Image-Based Numerical Method,” in special issue of Int. J. Rock Mech. Min. Sci., 41(3), Paper
No. 2B 01 (April). Proceedings of the ISRM SINOROCK2004 symposium (Three Gorges Project
Site, China, May 2004). J. A. Hudson and X.-T. Feng, eds. (2004).
Chen, S., Z. Q. Yue and L. G. Tham. “Digital Image-Based Numerical Modeling Method for
Prediction of Inhomogeneous Rock Failure,” Int. J. Rock Mech. & Min. Sci., 41, 939-957 (2004).
Chen, W.-P., J. Reinfuirt and F. O. Vincent. “Stage Excavation Analyses of CA/T Slurry Walls,”
in Numerical Methods in Geotechnical Engineering: Recent Developments (Proceedings of
Sessions of Geo-Denver 2000, Denver, Colorado, August 2000). Geotechnical Special Publication
No. 96, pp. 1-11. G. M. Filz and D. V. Griffiths, eds. Reston, Virginia: ASCE (2000).
Chen, X., C. P. Tan and C. Detournay. “Wellbore Behaviour in Fractured Rock Masses,” in Rock
Mechanics in the National Interest (Proceedings of the 38th U.S. Rock Mechanics Symposium,
Washington, D.C., July 2001), Vol. 1, pp. 59-66. Rotterdam: A. A. Balkema (2001).
Chen, X., C. P. Tan and C. M. Haberfield. “Effect of Initial Pore Pressure Distribution on Deforma-
tions around Wellbores in Shales,” in Pacific Rocks 2000: Rock around the Rim (Proceedings of
the 4th North American Rock Mechanics Symposium, Seattle, Washington, July-August 2000),
pp. 247-252. J. Girard et al., eds. Rotterdam: A. A. Balkema (2000).
Chen, X., C. P. Tan and C. M. Haberfield. “The Importance of Coupled Flow-Mechanical Analysis
in Modelling of Shale Undrained Behaviour,” in Rock Mechanics for Industry (Proceedings of the
37th U.S. Rock Mech. Symp., Vail, Colorado, June 1999), Vol. 1, pp. 233-238. Bernard Amadei
et al., eds. Rotterdam: A. A. Balkema (1999).
Chen, X., C. P. Tan and C. M. Haberfeld. “Nonlinear Analysis of Deformations around Wellbores in
Shales,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the International
Chen, X., C. P. Tan and C. M. Haberfield. “Numerical Evaluation of the Deformation Behaviour
of Thick-Walled Hollow Cylinders of Shale,” Int. J. Rock Mech. & Min. Sci., 37, 947-961 (2000).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 15
Cheon, D. S., et al. “Simulation of Failure around a Circular Opening Using CWFS Model,” in
Numerical Modeling in Geomechanics – 2006 (CD Proceedings of the 4th International Sym-
Chern, J. C., C. W. Yu and F. Y. Shaw. “Effects of Construction Procedure on the Performance of a
Large Span Tunnel in Poor Rocks,” in Proceedings of the Eighth International Congress on Rock
Mechanics (Tokyo, Japan, September 1995), Vol. II, pp. 537-540. T. Fujii, ed. Rotterdam: A. A.
Balkema (1995).
Chiriotti, E., et al. “Methodology for Characterizing Very Large Rock Masses: An Illustrative
Example,” in Rock Mechanics for Industry (Proceedings of the 37th U.S. Rock Mech. Symp.,
Vail, Colorado, June 1999), Vol. 1, pp. 263-270. Bernard Amadei et al., eds. Rotterdam: A. A.
Balkema (1999).
Choe, M.-J., et al. “Construction Example for Tunneling under and Adjacent to Complexity Con-
dition in Weathered Rock,” in Pacific Rocks 2000: Rock around the Rim (Proceedings of the
4th North American Rock Mechanics Symposium, Seattle, Washington, July-August 2000), pp.
125-128. J. Girard et al., eds. Rotterdam: A. A. Balkema (2000).
Choi, S. O., H.-S. Shin and W.-K. Song. “Numerical Studies of the Thermo-Mechanical Behavior
of Rock Mass around Nuclear Waste Disposal Repository,” in Technology Roadmap for Rock Me-
chanics (Proceedings of the 10th Congress of the ISRM, Johannesburg, South Africa, September
2003), Vol. 1, pp. 207-210. Johannesburg: SAIMM (2003).
Choi, Y., et al. “A Numerical Analysis for Axial and Lateral Behavior of Instrumented Steel Pipe
Piles,” in Deep Foundations 2002 – An International Perspective on Theory, Design, Construction
and Performance, Vol. 1, pp. 289-304. M. W. O’Neill and F. C. Townsend, eds. Reston, Virginia:
ASCE (2002).
Chou, J.-C., B. L. Kutter and T. Travasarou. “Numerical Analysis of Centrifuge Models of the
BART Transbay Tube,” in Proceedings of the 5th International Conference on Recent Advances in
I. M. Idriss (San Diego, California, May 2010), paper no. 8.08. S. Prakash, ed. Rolla: Missouri
Chugh, A. K. “Natural Vibration Characteristics of Gravity Structures, Int. J. Numer. Anal. Meth.
Geomech., (in press) 2006.
Chugh, A. K., and R. L. Schuster. “Numerical Assessment of Locke Island Landslide, Columbia
River Valley, Washington State, USA,” in Soil and Rock America 2003 (Proceedings of the 39th
U.S. Rock Mechanics Symposium, Cambridge, Massachusetts, June 2003), pp. 2489-2496. P. J.
Culligan, H. H. Einstein and A. J. Whittle, eds. Essen: Verlag Glückauf (2003).
Chugh, A. K., and T. D. Stark. “Displacement Analysis of a Landslide,” in Landslides and
Avalanches: ICFL 2005 Norway (Proceedings of the 11th International Conference and Field
Trip on Landslides, Tromso, Norway, September 2005), pp. 73-81. K. Senneset, K. Flaate and J.
O. Larsen, eds. London: Taylor & Francis Group (2005).
FLAC Version 8.0

Chugh, A. K., and T. D. Stark. “Permanent Seismic Deformation Analysis of a Landslide,” Land-
slides, 3, 2-12 (2006).
Chugh, A. K., T. D. Stark and K. A. DeJong. “Reanalysis of a Municipal Landfill Slope Failure
near Cincinnati, Ohio, USA,” Can. Geotech. J., 44, 33-53 (2007).
Clapp, K. K., and M. M. MacLaughlin. “Performance of Numerical Rockbolt Elements: A Com-
parison of Model Results and Laboratory Test Data,” in Soil and Rock America 2003 (Proceedings
of the 39th U.S. Rock Mechanics Symposium, Cambridge, Massachusetts, June 2003), pp. 2173-
2178. P. J. Culligan, H. H. Einstein and A. J. Whittle, eds. Essen: Verlag Glückauf (2003).
Clark, I. H. “The Cap Model for Stress Path Analysis of Mine Backfill Compaction Processes,”
in Computer Methods and Advances in Geomechanics (Proceedings of the 7th International
Conference, Cairns, Australia, May 1991), Vol. 2, pp. 1293-1298. Rotterdam: A. A. Balkema
(1991).
Clark, I. H. “Crusher Modeling: Dynamic, Distinct and Continuum,” in FLAC and Numerical
Balkema (1999).
Clark, I. H. “The Role of Rock Fabric in Controlling Crushing Strength: Numerical Experiments,”
in Proceedings of the XVIII International Mineral Processing Congress (Sydney, Australia, May
1993), Vol. I, pp. 187-192. Sydney: Australasian Inst. Min. & Met. (1993).
Clark, I. H. “Simulation of Rockmass Strength Using Ubiquitous Joints,” in Numerical Modeling in
Geomechanics – 2006 (CD Proceedings of the 4th International Symposium, Madrid, Spain, May
2006), paper no. 08-07. R. Hart and P. Varona, eds. Minneapolis, Minnesota: Itasca Consulting
Group Inc. (2006).
Clark, I. H., P. G. Fuller and D. McLean. “Numerical Stress Analysis to Assess the Stability of
a Combined Open Pit and Underground Mining Operation in Central Australia,” in Static and
Dynamic Considerations in Rock Engineering, pp. 103-112. R. K. Brummer, ed. Rotterdam:
Clark, I. H., R. G. Gürtunca and P. S. Piper. “Predicting and Monitoring Stress and Deformation
Behaviour of Backfill in Deep-Level Mining Excavations,” in Proceedings of the 5th Australia-New
Zealand Conference on Geomechanics (Sydney, Australia, August 1988), pp. 214-218. Sydney:
Institution of Engineers (1988).
Cogan, J., D. Pant and G. M. Joshi. “FLAC Applications for the Kali Gandaki ‘A’ Hydroelectric
Project, Nepal,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the Inter-
national FLAC Symposium, Minneapolis, Minnesota, September 1999), pp. 71-77. C. Detournay
and R. Hart, eds. Rotterdam: A. A. Balkema (1999).
Collotta, T., P. Beretta and M. D’Angelantonio. “Stabilization of Deep Landslides in Overconsol-
idated Clays: 3D Back-Analyses of Centrifuge Models,” in FLAC and Numerical Modeling in
Geomechanics (Proceedings of the International FLAC Symposium, Minneapolis, Minnesota,
September 1999), pp. 79-85. C. Detournay and R. Hart, eds. Rotterdam: A. A. Balkema (1999).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 17
Córdova, D., J. Cuadros and L. R. Alejano. “Practical Considerations and Models of the Sublevel
Caving Exploitation ‘Tinyag’ in Peru,” in MASSMIN 2008 (5th International Conference on Mass
Mining, Luleå, Sweden, June 2008), pp. 751-760. H. Schunnesson and E. Nordlund, eds. Luleå:
Division of Mining & Geotechnical Engineering, Luleå University of Technology (2008).
Corkum, A. G., L. J. Lorig and M. Ruest. “Remedial Design of Steel Arch Support for an Ore Pile
Tunnel Using FLAC,” in Continuum and Distinct Element Modeling in Geomechanics – 2011
(Proceedings of the 2nd International FLAC/DEM Symposium, Melbourne, Australia, February
2011), paper no. 03-01, pp. 95-103. D. Sainsbury et al., eds. Minneapolis: Itasca International
Inc. (2011).
Corthésy, R., and M. H. Leite. “A Strain-Softening Numerical Model of Core Discing and Damage,”
Int. J. Rock Mech. Min. Sci., 45, 329-350 (2008).
Cotecchia, F., F. Santaloia and F. Santoro. “Movements in a Tectonized Soil Slope: Comparison
of Monitoring Data and Modelling Results,” in GeoEng 2000 (Proceedings of the International
Conference on Geotechnical & Geological Engineering, Melbourne, Australia, November 2000),
Paper SNES1039. Lancaster, Pennsylvania: Technomic Publishing (2000).
Coulthard, M. A., and V. Ciesielski. “An Expert System to Choose a Stress Analysis Program for
Rock Excavation Design,” in Computer Methods and Advances in Geomechanics (Proceedings of
the 7th International Conference, Cairns, Australia, May, 1991), Vol. 1, pp. 51-56. Rotterdam:
Coulthard, M. A., and T. N. Little. “Modeling of Stability of High Westwall at OK Tedi Copper-Gold
Mine,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the International
FLAC Symposium, Minneapolis, Minnesota, September 1999), pp. 39-46. C. Detournay and R.
Hart, eds. Rotterdam: A. A. Balkema (1999).
Cuisiat, F. D. E., and F. Besnus. “Near and Far Field Thermal Calculations for Nuclear Spent Fuel
Disposal in Deep Geological Formations,” in FLAC and Numerical Modeling in Geomechanics
Cundall, P. “Shear Band Initiation and Evolution in Frictional Materials,” in Mechanics Computing
in the 1990s and Beyond (Proceedings of the Conference, Columbus, Ohio, May, 1991), Vol. 2:
Structural and Material Mechanics, pp. 1279-1289. New York: ASME (1991).
Cundall, P., and M. Board. “A Microcomputer Program for Modeling Large-Strain Plasticity Prob-
lems,” in Numerical Methods in Geomechanics (Proceedings of the 6th International Conference,
Innsbruck, Austria, April, 1988), pp. 2101-2108. G. Swoboda, ed. Rotterdam: A. A. Balkema
(1988).
Cundall, P., C. Carranza-Torres and R. Hart. “A New Constitutive Model Based on the Hoek-
Brown Criterion,” in FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings of
FLAC Version 8.0

Cundall, P. A. “A Simple Hysteretic Damping Formulation for Dynamic Continuum Simulations,”
Cundall, P. A. “Numerical Modelling of Jointed and Faulted Rock,” in Mechanics of Jointed and
Faulted Rock, pp. 11-18. Rotterdam: A. A. Balkema (1990).
Cundall, P. A., and C. Detournay. “Modeling Shock and Detonation Waves with FLAC,” in Con-
tinuum and Distinct Element Numerical Modeling in Geo-Engineering (Proceedings of the 1st
International FLAC/DEM Symposium, Minneapolis, Minnesota, August 2008), paper no. 10-06.
R. Hart, C. Detournay and P. Cundall, eds. Minneapolis: Itasca Consulting Group Inc. (2008).
Cundall, P. A., D. O. Potyondy and C. A. Lee. “Micromechanics-Based Models for Fracture and
Breakout around the Mine-by Tunnel,” in Designing the Excavation Disturbed Zone Workshop
on Designing the Excavation Disturbed Zone for a Nuclear Repository in Hard Rock (Winnipeg,
Canada, September 1996) – Proceedings of the EDZ Workshop, pp. 113-122. J. B. Martino and
C. D. Martin, eds. Toronto: 1996 Int. Conf. on Deep Geological Disposal of Radioactive Waste
(1996).
da Gama e Silva, R. L., P. A. Neme and F. A. Garcia. “A Large Urban Tunnel – Special Problems
and Their Solutions,” in Tunnels for People (Proceedings of World Congress 97, 23rd General
Assembly of the International Tunnelling Association, Vienna, Austria, April 1997), Vol. 1, pp.
491-496. J. Golser, W. J. Hinkel and W. Schubert, eds. Rotterdam: A. A. Balkema (1997).
Dai, C. “Bulkhead Wall Design on Very Soft Clay Ground,” in Continuum and Distinct Element
Numerical Modeling in Geo-Engineering (Proceedings of the 1st International FLAC/DEM
Symposium, Minneapolis, Minnesota, August 2008), paper no. 11-01. R. Hart, C. Detournay and
P. Cundall, eds. Minneapolis: Itasca Consulting Group Inc. (2008).
Dai, C., and P. Pells. “Two-Dimensional Large Strain Consolidation Prediction and Incrementally
Deposited Tailings,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the
International FLAC Symposium, Minneapolis, Minnesota, September 1999), pp. 123-131. C.
Detournay and R. Hart, eds. Rotterdam: A. A. Balkema (1999).
Dai, C. “Wharf Retaining Wall Design on Very Soft Clay Ground,” in Continuum and Distinct
Daller, J., W. Unterberger and B. Hochgatterer. “Vibration Control in Railway Tunnels,” Proceed-
ings of the 3rd Symposium on Tunnel Construction and Underground Structures (Ljubljana,
Slovenia, September 1996).
D’Ambra, S. “Characterization and Back Analysis of a Complex Stope Deformation: San Bartolo
Cliff,” in Rock Mechanics: Meeting Society’s Challenges and Demands (1st Canada-U.S. Rock
Mechanics Symposium, Vancouver, Canada, May 2007), Vol. 2: Case Histories, pp. 943-949.
E. Eberhardt et al., eds. London: Taylor & Francis Group (2007).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 19
Damjanac, B., P. A. Cundall and T. Brandshaug. “Itasca Presentations at the Menlo Park Workshop,
August 23-24, 2004,” in Report of the Workshop on Extreme Ground Motions at Yucca Mountain,
August 23-35, 2004. U.S. Geological Survey, USGS Open-File Report 2006-1277. T. C. Hanks et
al., eds. Reston, Virginia: USGS (2004).
Damjanac, B., and E. Detournay. “Effects of Underground Nuclear Tests in French Polynesia on the
Stability of Atoll Flanks,” in Proceedings of the 9th ISRM Congress on Rock Mechanics (Paris,
France, 1999), Vol. 3, pp. 1767-1774. G. Vouille and P. Berest, eds. Lisse: Balkema (2002).
Damjanac, B., and E. Detournay. “Numerical Modeling of Normal Wedge Indentation in Rocks,”
in Rock Mechanics (Proceedings of the 35th U.S. Symposium, University of Nevada, Reno, June
1995), pp. 349-354. J. J. K. Daemen and R. A. Schultz, eds. Rotterdam: A. A. Balkema (1995).
Damjanac, B., E. Detournay and H. Huang. “Effects of Underground Nuclear Tests in French
Polynesia on the Stability of Atoll Flanks,” in FLAC and Numerical Modeling in Geomechanics
Damjanac, B., C. Fairhurst and T. Brandshaug. “Numerical Simulation of the Effects of Heating
on the Permeability of a Jointed Rock Mass,” in Proceedings of the 9th ISRM Congress on Rock
Mechanics (Paris, France, 1999), Vol. 2, pp. 881-885. G. Vouille and P. Berest, eds. Rotterdam:
Damjanac, B., T. Siegel and R. Hart. “Seismic Analysis of a Pile-Supported Wharf in Charleston,
SouthCarolina,” presentedatTheDowntoEarthTechnology, DeepFoundationsCongress(Orlando,
February 2002).
Dasgupta, B. “Numerical Modeling of Large Underground Caverns for Hydro Power Projects,”
in Trends in Rock Mechanics (Proceedings of Sessions of Geo-Denver 2000, Denver, Colorado,
August 2000). Geotechnical Special Publication No. 102, pp. 50-64. J. F. Labuz, S. D. Glaser and
E. Dawson, eds. Reston, Virginia: ASCE (2000).
Dasgupta, B., et al. “Design of Underground Caverns for Tehri Hydropower Project, India by
Numerical Modelling,” in Proceedings of the 9th ISRM Congress on Rock Mechanics (Paris,
France, 1999), Vol. 1, pp. 357-358. G. Vouille and P. Berest, eds. Rotterdam: A. A. Balkema
(1999).
Dasgupta, B., R. Singh and V. M. Sharma. “Numerical Modelling of Desilting Chambers for Nathpa
Jhakri Hydroelectric Project,” in Proceedings of the 9th ISRM Congress on Rock Mechanics
(Paris, France, 1999), Vol. 1, pp. 359-360. G. Vouille and P. Berest, eds. Rotterdam: A. A.
Balkema (1999).
Davies, O., et al. “Assessing the Influence of Climate Change on the Progressive Failure of a Railway
Embankment,” in Geomechanics in the Emerging Social & Technological Age (CD Proceedings
of the 12th IACMAG Conference, Goa, India, October 2008), paper no. Q06. Toronto: X-CD
Technologies Inc. (2008).
FLAC Version 8.0

Dawson, E. “Finite Element Slope Stability Analysis,” in Proceedings of the 47th Annual Geotech-
nical University of Minnesota Engineering Conference, February 1999, pp. 53-70. J. F. Labuz,
ed. Minneapolis: Minnesota Geotechnical Society/University of Minnesota (1999).
Dawson, E., et al. “Geotechnical Stability Analysis by Strength Reduction,” in Slope Stability 2000
(Proceedings of Sessions of Geo-Denver 2000, Denver, Colorado, August 2000). Geotechnical
Special Publication No. 101, pp. 99-113. D. V. Griffiths, G. A. Fenton and T. R. Martin, eds.
Reston, Virginia: ASCE (2000).
Dawson, E., K. You and Y. Park. “Strength-Reduction Stability Analysis of Rock Slopes Using
the Hoek-Brown Failure Criterion,” in Trends in Rock Mechanics (Proceedings of Sessions of
Geo-Denver 2000, Denver, Colorado, August 2000). Geotechnical Special Publication No. 102,
pp. 65-77. J. F. Labuz, S. D. Glaser and E. Dawson, eds. Reston, Virginia: ASCE (2000).
Dawson, E. M., and P. A. Cundall. “Cosserat Plasticity for Modeling Layered Rock,” in Fractured
and Jointed Rock Masses (Proceedings of the ISRM Regional Conference, Lake Tahoe, Califor-
nia, June 1992), pp. 267-276. L. R. Myer et al., eds. Berkeley, California: Lawrence Berkeley
Laboratory (1992).
Dawson, E.M., andP.A.Cundall. “SlopeStabilityUsingMicropolarPlasticity,” inRockMechanics
Tools and Techniques (Proceedings of the 2nd North American Rock Mechanics Symposium,
Montréal, Canada, June 1996), Vol. 1, pp. 551-558. M. Aubertin et al., eds. Rotterdam: A. A.
Balkema (1996).
Dawson, E. M., et al. “A Practice Oriented Pore-Pressure Generation Model,” in FLAC and
Numerical Modeling in Geomechanics – 2001 (Proceedings of the 2nd International FLAC
Balkema (2001).
Dawson, E. M., and W. H. Roth. “Slope Stability Analysis with FLAC,” in FLAC and Numerical
Minnesota, September 1999), pp. 3-9. C. Detournay and R. Hart, eds. Rotterdam: A. A. Balkema
(1999).
Dawson, E. M., W. H. Roth and A. Drescher. “Slope Stability Analysis by Strength Reduction,”
Géotechnique, 49(6), 835-840 (1999).
Dawson, R. V., D. D. Curtis and C. R. Donnelly. “Sliding Stability of Concrete Gravity Dams,”
presented at The Conference of the Canadian Electrical Association, Electricity ’96, Montréal,
Canada, April 1996.
de Bruyn, I. A., et al. “Numerical Analyses for Evaluation of Pit Wall Stability and Stresses
Resulting from Proposed Underground Mining Excavations beneath the Ok Tedi Open Pit, Papua,
New Guinea,” in Slope Stability 2009 (Proceedings of the 2009 International Symposium on Rock
Slope Stability in Open Pit and Civil Engineering, Universidad de Los Andes, Santiago, Chile,
November 2009). J. R. Read, ed. (2009).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 21
De Nicola, A., and M. F. Randolph. “Tensile and Compressive Shaft Capacity of Piles in Sand.” The
University of Western Australia, Department of Civil Engineering, Geomechanics Group, Research
Report No. G1057 (January 1993).
De Souza, E., and A. P. Dirige. “Procedures for the Design of Sillmats with Paste Backfill,” in Rock
Mechanics in the National Interest (Proceedings of the 38th U.S. Rock Mechanics Symposium,
Washington, D.C., July 2001), Vol. 1, pp. 433-442. Rotterdam: A. A. Balkema (2001).
Deák, G., and S. Deák. “Collapse Risk Assessment of Salt Mining Using DKR Control Method,”
Minerit & Geomecanica (2007).
Decker, J. B., et al. “An Integrated Relational Database for Tracking Rock Mass Data during
Tunnelling,” in Proceedings of AITES-ITA 2006 (World Tunnel Congress & 32nd ITA General
Assembly, Seoul, Korea, April 2006), special issue of Tunn. Undergr. Sp. Tech., 21(3-4), paper
no. pita06-0312 (May-July). I.-M. Lee, C. Yoo and K.-H. You, eds. Elsevier Ltd. (2006).
D’Elia, B., et al. “FLAC Modeling of the Deformation and Failure Mechanism of a High Cut in Clay
Shales,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the International
FLAC Symposium, Minneapolis, Minnesota, September 1999), pp. 47-54. C. Detournay and R.
Hart, eds. Rotterdam: A. A. Balkema (1999).
DeGagné, D. O., A. G. Corkum and L. J. Lorig. “Estimation of Tunnel Squeezing in Anisotropic
Stress Fields Using a FLAC-Based Neural Network,” in Continuum and Distinct Element Mod-
eling in Geomechanics – 2011 (Proceedings of the 2nd International FLAC/DEM Symposium,
Melbourne, Australia, February 2011), paper no. 03-06, pp. 141-151. D. Sainsbury et al., eds.
Minneapolis: Itasca International Inc. (2011).
Deisman, N., and R. J. Chalaturnyk. “Hydrogeomechanical Characterization of Coalseam Reser-
voirs: Theoretical Development,” in CD Proceedings of the 2008 Asia Pacific Coalbed Methane
Symposium (Brisbane, Australia, September 2008), paper 002. P. Massarotto et al., eds. Brisbane,
Australia: University of Queensland, Chem. Eng. & Earth Sci. (2008).
Deluzarche, R., F. Dedecker and J. J. Fry. “Static and Dynamic Analysis of Stability of Rocky
Slopes via Particle Methods,” in Numerical Modeling in Micromechanics via Particle Methods
(Proceedings of the 1st International PFC Symposium, Gelsenkirchen, Germany, November
2002), pp. 125-131. H. Konietzky, ed. Lisse: Balkema (2003).
Deschamps, R., and G. Yankey. “Limitations in the Back-Analysis of Strength from Failures,” in
Proceedings of the 55th Annual Geotechnical Engineering Conference, University of Minnesota
(St. Paul Campus, March 2007), pp. 95-104. J. F. Labuz, J. M. Tinucci and C.-S. Kao, eds.
Minneapolis: University of Minnesota (2007).
Detournay, C. “Impact of Rock Strength on Sand Production – Numerical and Semi-Analytical In-
vestigations,” in Proceedings of the 9th HSTAM International Congress on Mechanics (Dedicated
to the Memory of Professor Ioannis Vardoulakis, Limassol, Cyprus, July 2010), pp. 319-329.
Limassol: University of Cyprus (2010).
FLAC Version 8.0

Detournay, C. “Numerical Modeling of the Slit Mode of Cavity Evolution Associated with Sand
Production,” in CD Proceedings of the SPE Annual Technical Conference & Exhibition (Denver,
Colorado, September 2008), paper no. SPE 116168. Houston: SPE (2008).
Detournay, C., and P. Cundall. “The Cysoil Model: A Simple Strain Hardening Constitutive Model
for Soft Stiff Soils,” in Continuum and Distinct Element Numerical Modeling in Geo-Engineering
Group Inc. (2008).
Detournay, C., and P. A. Cundall. “Numerical Modeling of Free Surface Flow in Porous Me-
dia Using FLAC3D,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the
International FLAC Symposium on Numerical Modeling in Geomechanics, Minneapolis, Min-
nesota, September 1999), pp. 155-161. Christine Detournay and Roger Hart, eds. Rotterdam:
A. A. Balkema, 1999.
Detournay, C., and P. A. Cundall. “Numerical Modeling of Unsaturated Flow in Porous Media
Using FLAC,” in FLAC and Numerical Modeling in Geomechanics – 2001 (Proceedings of the
2nd International FLAC Conference, Lyon, France, October 2001), pp. 115-124. D. Billaux et
al., eds. Rotterdam: A. A. Balkema (2001).
Detournay, C., P. Cundall and J. Parra. “A Study of Compaction Band Formation with the Double-
Yield Model,” in FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings of the
3rd International FLAC Symposium, Sudbury, Ontario, Canada, October 2003), pp. 27-33.
Detournay, C., and E. Dzik. “Nodal Mixed Discretization for Tetrahedral Elements,” in Numerical
Detournay, C., and Y. Han. “Installation of a Triple Anchored Excavation Wall in Sand Using the
Cysoil Model,” in Continuum and Distinct Element Numerical Modeling in Geo-Engineering
Group Inc. (2008).
Detournay, C., and R. Hart, eds. FLAC and Numerical Modeling in Geomechanics (Proceedings
of the International FLAC Symposium, Minneapolis, Minnesota, September 1999). Rotterdam:
Detournay, C., and R. Hart. “Stability of a Slope in Unsaturated Conditions,” in Continuum and
FLAC Version 8.0

BIBLIOGRAPHY 6 - 23
Detournay, C., C. Tan and B. Wu. “Modeling the Mechanism and Rate of Sand Production Using
FLAC,” in Numerical Modeling in Geomechanics – 2006 (CD Proceedings of the 4th Interna-
tional Symposium, Madrid, Spain, May 2006), paper no. 08-10. R. Hart and P. Varona, eds.
Minneapolis, Minnesota: Itasca Consulting Group Inc. (2006).
Detournay, C., Z. Wang and Y. Han. “Modeling of Nevada Sand Behavior Using CHSOIL,” in
Continuum and Distinct Element Modeling in Geomechanics – 2011 (Proceedings of the 2nd
International FLAC/DEM Symposium, Melbourne, Australia, February 2011), paper no. 13-08,
pp. 773-780. D. Sainsbury et al., eds. Minneapolis: Itasca International Inc. (2011).
Detournay, C., B. Wu and C. Tan. “Hydro-Mechanical Modeling of Damage around Borehole
in Laboratory Experiments,” in Gulf Rocks 2004: Rock Mechanics across Borders & Disci-
plines (Proceedings of the 6th NARMS Conference, Houston, Texas, June 2004), paper no.
ARMA/NARMS 04-590. D. P. Yale, S. M. Willson and A. S. Abou-Sayed, eds. (2004).
Dias, D., and R. Kastner. “Numerical Modeling of Shield Tunneling Processes in Soft Ground,” in
FLAC and Numerical Modeling in Geomechanics – 2001 (Proceedings of the 2nd International
FLAC Conference, Lyon, France, October 2001), pp. 353-360. D. Billaux et al., eds. Rotterdam:
Dias, D., and R. Kastner. “Tunnel Face Reinforcement: Numerical Analysis,” in FLAC and
Numerical Modeling in Geomechanics – 2001 (Proceedings of the 2nd International FLAC
Balkema (2001).
Diederichs, M. S., T. Carter and D. Martin. “Practical Rock Spall Prediction in Tunnels,” in
Tunnel Vision Towards 2020 (Proceedings of the ITA-AITES 2010 World Tunneling Congress,
Vancouver, Canada, May 2010), paper no. fin00517. (2010).
Dierdrichs, M.S., etal. “ShearStrengthReduction(SSR)ApproachforSlopeStabilityAnalyses,” in
Rock Mechanics: Meeting Society’s Challenges and Demands (1st Canada-U.S. Rock Mechanics
Symposium, Vancouver, Canada, May 2007), Vol. 1: Fundamentals, New Technologies & New
Ideas, pp. 319-327. E. Eberhardt et al., eds. London: Taylor & Francis Group (2007).
Ding, Y., J. Wang and L. Wang. “Numerical Simulation of Construction Effects of Diaphragm
Wall Panels on Adjacent Ground (in Chinese),” in Proceedings of the 9th China National Rock
Mechanics & Engineering Conference, pp. 249-254. Beijing: Science Publishing Co. (2006).
Dirige, A. P. E., and J. F. A. Archibald. “The Effects of Geometry on the Uniaxial Compressive
Strength Properties of Intact Rock Core Specimens,” in Golden Rocks 2006 – 50 Years of Rock
Mechanics, ColoradoSchoolofMines(Proceedingsofthe41stU.S.RockMechanicsSymposium,
June 2006), paper no. 06-1016. D. P. Yale et al., eds. ARMA (2006).
Dirige, A. P. E., and E. De Souza. “Engineering Design of Backfill Systems in Undercut Mining,” in
Minefill 2007 – Innovation and Experience (CD Proceedings of the 9th International Symposium
on Mining with Backfill, Montréal, Canada, May 2007), paper no. 2621. Montréal: CIM (2007).
FLAC Version 8.0

Dirige, A. P. E., E. De Souza and J. Archibald. “The Advantage of Centrifuge Modeling for Backfill
Design,” in Minefill 2007 – Innovation and Experience (CD Proceedings of the 9th International
Symposium on Mining with Backfill, Montréal, Canada, May 2007), paper no. 2621. Montréal:
CIM (2007).
Dirige, A. P. E., E. De Souza and J. Chew. “Centrifuge Physical Modeling of Paste Fill Sillmats,”
in Minefill 2001 (Proceedings of the 7th International Symposium on Mining with Backfill),
pp. 13-25. D. Stone, ed. Littleton, Colorado: SME (2001).
Dittrich, J. P., et al. “Micropile and Low-Mobility Grouting Foundation Remediation for a Coastal
Development in Barbados,” in GeoHalifax 2009 (Proceedings of the 62nd Canadian Geotechni-
cal Conference & 10th Joint CGS/IAH-CNC Groundwater Conference, Halifax, Nova Scotia,
September 2009), pp. 970-977. Richmond, B.C., Canada: BiTech Publishers (2009).
Djordjevic, N., andI.Onederra. “BlastControlthroughtheUseofNotchedHoles,” inFRAGBLAST
– 8 (8th International Symposia on Rock Fragmentation by Blasting, Santiago, Chile, May 2006),
pp. 104-108. Santiago: Editec (2006).
Dolezalová, M., I. Hladík and V. Zemanová. “Stability Analysis of a Motorway Embankment
on Soft Subsoil Using FEM, FLAC and Limit Equilibrium Models,” in FLAC and Numerical
Modeling in Geomechanics – 2001 (Proceedings of the 2nd International FLAC Conference,
Lyon, France, October 2001), pp. 125-132. D. Billaux et al., eds. Rotterdam: A. A. Balkema
(2001).
Du Plessis, L., and D. C. Martin. “Numerical Modeling Studies for Design of High Rock Slopes
at Palabora Copper Mine,” in Proceedings of the 7th International Congress on Rock Mechanics
(Aachen, Germany, September 1991), Vol. 1, pp. 799-804. W. Wittke, ed. Rotterdam: A. A.
Balkema (1991).
Duan, F. “Numerical Analyses of Large Underground Openings for the Superconducting Super-
Collider,” in Safety and Environmental Issues in Rock Engineering (Proceedings of EUROCK
’93, Lisbon, Portugal, June 1993), pp. 527-534. L. Sousa, E. Ribeiro and N. F. Grossmann, eds.
Duan, F., and M. Mrugala. “Modeling Large Underground Experimental Halls for the Supercon-
ducting Super Collider,” Int. J. Rock Mech. Min. Sci. & Geomech. Abstr., 30(7), 1333-1339
(1993).
Dunbavan, M. “Evaluation of Dragline Foundation Stability – A Case Study,” in Computer Meth-
ods and Advances in Geomechanics (Proceedings of the 7th International Conference, Cairns,
Australia, May 1991), Vol. 2, pp. 1305-1310. Rotterdam: A. A. Balkema (1991).
Duncan Fama, M. E. “A Finite Element Model of Yield Zones in Weak Rock,” in Computer
Methods and Advances in Geomechanics (Proceedings of the 7th International Conference,
Cairns, Australia, May 1991), Vol. 2, pp. 1311-1318. Rotterdam: A. A. Balkema (1991).
Duncan Fama, M. E., R. Truman and M. S. Craig. “Two- and Three-Dimensional Elasto-Plastic
Analysis for Coal Pillar Design and Its Application to Highwall Mining,” Int. J. Rock Mech. Min.
Sci. & Geomech. Abstr., 32(3), 215-225 (1995).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 25
Durgunoglu, H. T., H. F. Kulaç and B. Arkun. “A Deep Retaining System Construction with Soil
Nailing in Soft Rocks in Istanbul, Turkey,” in Soil and Rock America 2003 (Proceedings of the
39th U.S. Rock Mechanics Symposium, Cambridge, Massachusetts, June 2003), pp. 2113-2118.
P. J. Culligan, H. H. Einstein and A. J. Whittle, eds. Essen: Verlag Glückauf (2003).
Durrani, I. K., E. A. Ellis and D. J. Reddish. “Modeling Lateral Pile-Soil Interaction for a Row of
Piles in a Frictional Soil,” in Numerical Modeling in Geomechanics – 2006 (CD Proceedings of
the 4th International Symposium, Madrid, Spain, May 2006), paper no. 05-01. R. Hart and P.
Varona, eds. Minneapolis, Minnesota: Itasca Consulting Group Inc. (2006).
Eberhardt, E., et al. “Rock Slope Stability Research,” in Slope Stability 2007 (Proceedings of the
2007InternationalSymposiumonRockSlopeStabilityinOpenPitMiningandCivilEngineering,
Perth, Australia, September 2007), pp. 321-332. Y. Potvin, ed. Perth: Australian Centre for
Geomechanics (2007).
Eclaircy-Caudron, S., et al. “Evaluation of a Back Analysis Method on Simple Tests,” in Numerical
El-Emam, M. M., et al. “Shaking Table and Numerical Modelling of Reinforced Soil Walls,” in
Landmarks in Earth Reinforcement (Proceedings of the International Symposium,
Fukuoka/Kyushu, Japan, November 2001), Vol. 1, pp. 329-334. H. Ochiai et al., eds. Rotterdam:
Elhakim, A. F., and P. W. Mayne. “Foundation Load-Displacement Response from Small-Strain
Stiffness,” in Geotechnical Engineering in the Information Technology Age (CD Proceedings of
Geocongress 2006, Atlanta, Georgia, February-March 2006). D. J. DeGroot et al., eds. Reston,
Virginia: ASCE (2006).
Ellis, H. L., A. I. Feldman and G. J. Buechel. “Numerical Analysis of the Boston Red Line Tunnels,”
Endicott, L., J. J. Ashley and J. W. Tattersall. “Design of Tunnel Portals and Initial Drives for the
Route 3 Tai Lam Highway Tunnels, Hong Kong,” in GeoEng 2000 (Proceedings of the Interna-
tional Conference on Geotechnical & Geological Engineering, Melbourne, Australia, November
2000), Paper UW0511. Lancaster, Pennsylvania: Technomic Publishing (2000).
Escuder, E., J. Andreu and M. Rechea. “Modeling of Constructional Behaviour for a One Hundred
Meters High Embankment in Spain,” in FLAC and Numerical Modeling in Geomechanics (Pro-
ceedings of the International FLAC Symposium, Minneapolis, Minnesota, September 1999), pp.
87-93. C. Detournay and R. Hart, eds. Rotterdam: A. A. Balkema (1999).
Escuder, I. “Calculation of Collapse Strains of Floodable Rockfills by Means of Finite Difference
Formulated Numerical Simulations,” in FLAC and Numerical Modeling in Geomechanics – 2001
(Proceedings of the 2nd International FLAC Conference, Lyon, France, October 2001), pp. 133-
136. D. Billaux et al., eds. Rotterdam: A. A. Balkema (2001).
FLAC Version 8.0

Escuder, I. “Study of Creep of Rockfills by Means of Finite Difference Formulated Numerical
Simulations and Instrumentation Records,” in FLAC and Numerical Modeling in Geomechanics
– 2001 (Proceedings of the 2nd International FLAC Conference, Lyon, France, October 2001),
pp. 137-140. D. Billaux et al., eds. Rotterdam: A. A. Balkema (2001).
Escuder, I., L. Altarejos and M. G. de Membrillera. “FLAC Numerical Models Applied to Safety
Assessment of Dams,” in Numerical Modeling in Geomechanics – 2006 (CD Proceedings of the
4th International Symposium, Madrid, Spain, May 2006), paper no. 04-03. R. Hart and P. Varona,
eds. Minneapolis, Minnesota: Itasca Consulting Group Inc. (2006).
Esterhuizen, G. S. “Development of Numerical Models to Investigate Permeability Changes and
Gas Emission around Longwall Mining Panel,” in CD Proceedings of Alaska Rocks 2005 – Rock
Mechanics for Energy, Mineral and Infrastructure Development in the Northern Regions (Uni-
versity of Alaska-Anchorage, June 2005), paper no. ARMA/USRMS 05-744. G. Chen et al., eds.
ARMA, University of Alaska-Fairbanks (2005).
Esterhuizen, G. S., and T. M. Barczak. “Development of Ground Response Curves for Longwall
Tailgate Support Design,” in Golden Rocks 2006 – 50 Years of Rock Mechanics, Colorado School
of Mines (Proceedings of the 41st U.S. Rock Mechanics Symposium, June 2006), paper no.
06-935. D. P. Yale et al., eds. ARMA (2006).
Esterhuizen, G. S., and J. Ellenberger. “Effects of Weak Bands on Pillar Stability in Stone Mines:
Field Observations and Numerical Model Assessment,” in Proceedings of the 26th International
Conference on Ground Control in Mining (Morgantown, West Virginia, July-August 2007), pp.
320-326. S. Peng, S. Tadolini and C. Mark, eds. Morgantown, West Virginia: West Virginia
University (2007).
Ethier, Y., M. Karray and G. Lefebvre. “Simulations of Elastic Wave Propagation Using FLAC to
Optimize the Measurement of Shear Wave Velocity in the Laboratory,” in Continuum and Distinct
Evangelista, A., et al. “Numerical Analysis of Roof Failure Mechanisms of Cavities in a Soft Rock,”
in GeoEng 2000 (Proceedings of the International Conference on Geotechnical & Geological
Engineering, Melbourne, Australia, November 2000), Paper UW0260. Lancaster, Pennsylvania:
Technomic Publishing (2000).
Ewy, R. T. “3D Stress Effects in Elastoplastic Wellbore Failure Models,” in Rock Mechanics as a
Multidisciplinary Science (Proceedings of the 32nd U.S. Symposium, July 1991), pp. 951-960.
Exadaktylos, G. E., P. A. Liolios and M. C. Stavropoulou. “A Semi-Analytical Elastic Stress-
Displacement Solution for Notched Circular Openings in Rocks,” Int. J. Solids & Struc., 40,
1165-1187 (2003).
Exadaktylos, G. E., et al. “Analogue and Numerical Modeling of Normal Fault Patterns Produced
Due to Slip along a Detachment Zone,” Tectonophysics, 376, 117-134 (2003).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 27
Exadaktylos, G. E., and M. C. Stavropoulou. “A Closed-Form Elastic Solution for Stresses and
Displacements around Tunnels,” Int. J. Rock Mech. & Min. Sci., 39, 905-916 (2002).
Ezzein, F., R. J. Bathurst and W. A. Take. “Analysis of the Influence of Foundation Compressibility
on the Behaviour of Reinforced Soil Walls Using PIV,” in GeoHalifax 2009 (Proceedings of the
62nd Canadian Geotechnical Conference & 10th Joint CGS/IAH-CNC Groundwater Confer-
ence, Halifax, Nova Scotia, September 2009), pp. 252-259. Richmond, B.C., Canada: BiTech
Publishers (2009).
Fabry, C., and J.-F. Thimus. “Numerical Analysis of Shaft Stability during Successive Excavation
Phases,” in FLAC and Numerical Modeling in Geomechanics (Proceedings of the International
Fahimifar, A., and H. Soroush. “Modelling of Rockbolt Behavior around Tunnels with Emphasis on
Stress Distribution on the Rockbolt Shank,” in Proceedings of the 5th International Symposium on
Ground Support (Perth, Australia, September 2004), pp. 203-208. E. Villaescusa and Y. Potvin,
eds. London: Balkema (2004).
Fairhurst, C. “Analysis and Design in Rock Mechanics: The General Context,” in Comprehensive
Rock Engineering, Vol. 2, pp. 1-29. J. A. Hudson, ed. Oxford: Pergamon Press Ltd., 1993.
Fairhurst, C. “Closing the Gap between Theory and Reality in Rock Mechanics,” presented at Hong
Kong University, Inaugural Dedication of the Rock Mechanics Laboratory (October 23, 1998).
Fairhurst, C. “Rock Mechanics and Nuclear Waste Repositories (Keynote Paper),” in Proceedings
of the International Workshop on the Rock Mechanics of Nuclear Waste Repositories (Vail,
Colorado, June 1999), pp. 1-45. S. Saeb and C. Francke, eds. Alexandria, Virginia: ARMA
(1999).
Fairhurst, C., and C. Carranza-Torres. “Closing the Circle – Some Comments on Design Proce-
dures for Tunnel Supports in Rock,” in Proceedings of the University of Minnesota 50th Annual
Geotechnical Conference, February 2002, pp. 21-84. J. F. Labuz and J. G. Bentler, eds. Min-
neapolis: University of Minnesota (2002).
Fairhurst, C., B. Damjanac and R. Hart. “Numerical Analysis as a Practical Design Tool in Geo
Engineering,” in Slope Stability 2000 (Proceedings of Sessions of Geo-Denver 2000, Denver,
Colorado, August 2000). Geotechnical Special Publication No. 101, pp. 169-183. D. V. Griffiths,
G. A. Fenton and T. R. Martin, eds. Reston, Virginia: ASCE (2000).
Fairhurst, C., and L. Lorig. “Improved Design in Rock and Soil Engineering with Numerical
Modelling,” in Distinct Element Modelling in Geomechanics, pp. 27-46. V. M. Sharma et al., eds.
New Delhi: Oxford & IBH Publishing (1999).
Fairhurst, C. F., et al. Underground Nuclear Testing in French Polynesia: Stability and Hydrology
Issues, Report of the International Geomechanical Commission to the French Government, Vols. I
and II (1998).
FLAC Version 8.0

Fakhimi, A., D. Salehi and N. Mojtabai. “Numerical Back Analysis for Estimation of Soil Param-
eters in the Resalat Tunnel Project,” Tunnl. & Und. Sp. Tech., 19, 57-67 (2004).
Fakhimi, A. A., and C. Fairhurst. “A Model For the Time-Dependent Behavior of Rock,” Int. J.
Rock Mech. Min. Sci. & Geomech. Abstr., 31(2), 117-126 (1994).
Fall, M., and O. Nasir. “Numerical Modeling of the Coupled Thermo-Chemo-Mechanical Response
of Cemented Paste Backfill Structures in Deep Mine Temperatures Conditions,” in ROCKENG 09
– Rock Engineering in Difficult Conditions (Proceedings of the 3rd CANUS Rock Mechanics
Symposium / 20th Canadian Rock Mechanics Symposium, Toronto, Canada, May 2009), paper
no. 4137. M. Diedrichs and G. Grasselli, eds. (2009).
Fang, Z., and J. P. Harrison. “Application of a Local Degradation Model to the Analysis of Brittle
Fracture of Laboratory Scale Rock Specimens under Triaxial Conditions,” Int. J. Rock Mech. &
Min. Sci., 39, 459-476 (2002).
Fang, Z., and J. P. Harrison. “Development of a Local Degradation Approach to the Modelling of
Brittle Fracture in Heterogeneous Rocks,” Int. J. Rock Mech. & Min. Sci., 39, 443-457 (2002).
Farhangi, S., C. R. I. Clayton and D. J. Richards. “Comparison of Analytically and Numerically
Determined Strain Paths around Two Geometries,” in Numerical Modeling in Geomechanics –
2006 (CD Proceedings of the 4th International Symposium, Madrid, Spain, May 2006), paper no.
Farinha, M. L. B., and J. V. Lemos. “Numerical Modeling of the Drainage System of Concrete
Dam Foundations,” in Numerical Modeling in Geomechanics – 2006 (CD Proceedings of the 4th
International Symposium, Madrid, Spain, May 2006), paper no. 03-02. R. Hart and P. Varona,
Farrell, T. M., K. Wallace and J. Ho. “Liquefaction Mitigation of Three Projects in California,”
in Proceedings of the 5th International Conference on Recent Advances in Geotechnical Earth-
quake Engineering and Soil Dynamics and Symposium in Honor of Professor I. M. Idriss (San
Diego, California, May 2010), paper no. 4.28a. S. Prakash, ed. Rolla: Missouri University of
Science and Technology (2010).
Feizi-Khankandi, S., et al. “2D Nonlinear Analysis of Asphaltic Concrete – Core Embankment
Dams,” in Geomechanics in the Emerging Social & Technological Age (CD Proceedings of
the 12th IACMAG Conference, Goa, India, October 2008), paper no. O01. Toronto: X-CD
Technologies Inc. (2008).
Fellner, D. “The Role of Numerical Calculations in the ‘Hazard Approach’ for Tunnels,” in Numer-
ical Modeling in Geomechanics – 2006 (CD Proceedings of the 4th International Symposium,
Madrid, Spain, May 2006), paper no. 02-03. R. Hart and P. Varona, eds. Minneapolis, Minnesota:
Itasca Consulting Group Inc. (2006).
Fellner, D., and F. Amann. “Modelling Yielding Support by Programming FLAC2D/FLAC3D,”
in Rock Engineering: Theory and Practice (Proceedings of ISRM Regional Symposium EU-
ROCK 2004 & 53rd Geomechanics Colloquy, Salzburg, Austria, October 2004), pp. 673-678.
W. Schubert, ed. Essen: Verlag Glückauf (2004).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 29
Feng, Z. Y., et al. “Dynamic Response of Li-Yu-Tan Earthdam Subjected to 1999 Chi-Chi Earth-
quake in Taiwan,” in Numerical Modeling in Geomechanics – 2006 (CD Proceedings of the 4th
International Symposium, Madrid, Spain, May 2006), paper no. 04-11. R. Hart and P. Varona,
Foroozan, R., et al. “Controls of Permeability on the Mechanical Evolution of Shortening Basins,”
in Proceedings of the 44th U.S. Rock Mechanics Symposium/5th U.S.-Canada Rock Mechanics
Symposium (Salt Lake City, Utah, June 2010), paper no. 10-375. Alexandria, Virginia: ARMA
(2010).
Fowler, D. “Rail Cathedral,” New Civil Engr., 18-22 (May 1993).
Francesco, L., et al. “Dynamic Response of Cantilever Retaining Walls Considering Soil Non-
Linearity,” in Proceedings of the 5th International Conference on Recent Advances in Geotech-
nical Earthquake Engineering and Soil Dynamics and Symposium in Honor of Professor I. M.
Idriss (San Diego, California, May 2010), paper no. 6.08a. S. Prakash, ed. Rolla: Missouri
Francia, S., etal. “ComputationalMethodsforDeepTunnelingDesign,” inSystem-BasedVisionfor
Strategic and Creative Design (Second International Conference on Structural and Construction
Engineering, Rome, Italy, September 2003), pp. 1247-1252. Lisse: Balkema (2003).
Francke, C.T., L.J.TerrillandJ.D.VandeKraats. “CaseStudyoftheEffectofStratigraphicLocation
on Roof Stability in Rock Salt,” in Proceedings of the 16th International Conference on Ground
Control in Mining (Morgantown, West Virginia, August 1997), pp. 243-250. Morgantown, West
Virginia: West Virginia University, Dept. of Mining Engineering (1997).
Francken, L., and A. Vanelstraete. “Interface Systems to Prevent Reflective Cracking,” in Pro-
ceedings of the 7th International Conference on Asphalt Pavements (Nottingham, England),
pp. 45-60. Nottingham: Int. Soc. Asphalt Pavements (1992).
Franco, S. de Bouvêa, A. Fontana Margarido and L. Scandiuzzi. “Distância entra juntas – Do
problema térmico em barragens tipo CCR: determinaçõ da distância entre juntas de retração,”
Revista Ibracon, IV(9), 20-25 (Octubro/Novembro 1994).
Frayne, M. A., and D. Z. Mraz. “Calibration of a Numerical Model for Different Potash Ores,” in
Proceedings of the 7th International Congress on Rock Mechanics (Aachen, Germany, Septem-
ber 1991), Vol. 1, pp. 471-475. W. Wittke, ed. Rotterdam: A. A. Balkema (1991).
Frew, B. “Soft Ground NATM in Hong Kong,” World Tunnelling, 9(9), 399-401 (November 1996).
Frueh, R. H., and K. J. Wissman. “Gambling on the Ground: Marine Geotechnical Engineering for
a Riverboat Gaming Facility,” in Soil and Rock America 2003 (Proceedings of the 39th U.S. Rock
Mechanics Symposium, Cambridge, Massachusetts, June 2003), pp. 1653-1657. P. J. Culligan,
H. H. Einstein and A. J. Whittle, eds. Essen: Verlag Glückauf (2003).
Frydman, S., and H. J. Burd. “Numerical Studies of Bearing-Capacity Factor N {gamma},”
J. Geotech. & Geoenv. Eng., 123(1), 20-29 (January 1997).
FLAC Version 8.0

Furtney, J. K., et al. “Numerical Modeling of Rock Blasting: Validation Tests for Blo-Up 2.5,” in
Continuum and Distinct Element Modeling in Geomechanics – 2011 (Proceedings of the 2nd
International FLAC/DEM Symposium, Melbourne, Australia, February 2011), paper no. 07-01,
pp. 359-367. D. Sainsbury et al., eds. Minneapolis: Itasca International Inc. (2011).
Gale, W. J. “A Pillar Design Approach,” in Proceedings of the Workshop on Coal Pillar Mechanics
and Design (Santa Fe, June 1992), pp. 188-195. A. T. Iannacchione et al., comps. U.S. Bureau
of Mines, Information Circular 9315 (1992).
Garagash, I. A., V. N. Nikolaevski and J. W. Dudley II. “FLAC Simulation of Triaxial and Com-
paction Tests of an Unconsolidated Reservoir Sand,” in FLAC and Numerical Modeling in Geome-
chanics (Proceedings of the International FLAC Symposium, Minneapolis, Minnesota, Septem-
ber 1999), pp. 505-510. C. Detournay and R. Hart, eds. Rotterdam: A. A. Balkema (1999).
Garratt, M. H. “Computer Modelling as a Tool for Strata Control and Reinforcement Design,”
IM&M, 2(14), 45-54 (1999).
Gee, R. A., and S. Wille. “Design and Construction of Sydney Northside Storage,” World Tunn.,
13(1), 29-35 (January/February 2000).
Genis, M., and H. Gercek. “A Numerical Study of Seismic Damage to Deep Underground Open-
ings,” in Technology Roadmap for Rock Mechanics (Proceedings of the 10th Congress of the
ISRM, Johannesburg, South Africa, September 2003), Vol. 1, pp. 351-355. Johannesburg:
SAIMM (2003).
Gentet, P., et al. “Large-Scale Test on a Three-Dimensional Geotextile Reinforced Earth Wall
near Charade (Puy de Dome), in Rencontres 95, Géotextiles et Géomembranes (Beaune, France,
September 1995), pp. 116-122. Ph. Delmas and J. P. Gourc, eds. Paris: Comité Francais pour les
Géotextiles et Géomembranes (1995).
Germanovich, L. N., et al. “Simulation of Crack Growth and Interaction in Compression,” in
Proceedings of the Eighth International Congress on Rock Mechanics (Tokyo, Japan, September
1995), Vol. I, pp. 219-226. T. Fujii, ed. Rotterdam: A. A. Balkema (1995).
Ghahreman Nejad, B., et al. “Seismic Response and Dynamic Deformation Analysis of Sar-
Cheshmeh Tailings Dam,” in Continuum and Distinct Element Modeling in Geomechanics –
2011 (Proceedings of the 2nd International FLAC/DEM Symposium, Melbourne, Australia,
February 2011), paper no. 09-02, pp. 539-548. D. Sainsbury et al., eds. Minneapolis: Itasca
International Inc. (2011).
Ghazavi, M., and Y. Soltanpour. “Effect of Cavity on Bearing Capacity of Shallow Foundations
in Geotextile-Reinforced Soil,” in Geomechanics in the Emerging Social & Technological Age
(CD Proceedings of the 12th IACMAG Conference, Goa, India, October 2008), paper no. M17.
Toronto: X-CD Technologies Inc. (2008).
FLAC Version 8.0

BIBLIOGRAPHY 6 - 31
Gingery, J. R., and S. M. Merry. “Evaluation of a Geogrid-Reinforced Soil Mat to Mitigate Post-
Liquefaction Settlements – A Case Study,” in Geotechnical Earthquake Engineering and Solid
Dynamics (GEESD IV, Sacramento, California, May 2008), CD Proceedings, Geotechnical Spe-
cial Publication No. 181, paper no. 104. D. Zeng, M. Manzari and D. R. Hiltunen, eds. New York:
ASCE (2008).
Givens, C. A., et al. “Estimation of Surface Subsidence at the Waste Isolation Pilot Plant,” in
CAMI’95 (Proceedings of the Third Canadian Conference on Computer Applications in the
Mineral Industry, Montréal, Canada, October 1995), pp. 340-347. H. S. Mitri, ed. Montréal:
McGill University Press (1995).
Glamheden, R., and U. Lindblom. “Predicted and Observed Heat Transfer around a Refrigerated
Rock Cave,” in Prediction and Performance in Rock Mechanics & Rock Engineering (Proceed-
ings of ISRM International Symposium EUROCK ’96, Turin, Italy, September 1996), Vol. 2,
pp. 1395-1401. G. Barla, ed. Rotterdam: A. A. Balkema (1996).
Glamheden, R., and U. Lindblom. “Thermal and Mechanical Behaviour of Refrigerated Caverns
in Hard Rock,” Tunn. & Underground Space Tech., 17, 341-353 (2002).
Gnanendran, C. T., M. K. Gopalan and S.-C. R. Lo. “Prediction of Pullout Behaviour of Geosyn-
thetic Reinforcement in Sandy Soils,” in GeoEng 2000 (Proceedings of the International Con-
ference on Geotechnical & Geological Engineering, Melbourne, Australia, November 2000).
Lancaster, Pennsylvania: Technomic Publishing (2000).
Göbel, I. R., and H. Meyer. “Calculating the Dynamic Modulus of a Subgrade Reaction for a
Circular Footing Load Resulting from the Fall of a Container,” in FLAC and Numerical Modeling
in Geomechanics – 2001 (Proceedings of the 2nd International FLAC Conference, Lyon, France,
October 2001), pp. 55-59. Rotterdam: A. A. Balkema (2001).
Goit, C. S., A. Kovács and A. H. Thomas. “Advanced Numerical Modeling in Tunnel Design –
Example of a Major Project in the UK,” in Continuum and Distinct Element Modeling in Ge-
omechanics – 2011 (Proceedings of the 2nd International FLAC/DEM Symposium, Melbourne,
Australia, February 2011), paper no. 03-03, pp. 117-126. D. Sainsbury et al., eds. Minneapolis:
Itasca International Inc. (2011).
Gómez, P., M. Díaz and L. Lorig. “Stability Analysis of Waste Dumps at Chuquicamata Mine,
Chile,” Felsbau, 20(6), 61-68 (2002).
Gräpel, C. K., et al. “Analysis of Field Performance of Landslide Repair Using a Pile Wall,” in
GeoHalifax 2009 (Proceedings of the 62nd Canadian Geotechnical Conference & 10th Joint
CGS/IAH-CNC Groundwater Conference, Halifax, Nova Scotia, September 2009), pp. 406-410.
Richmond, B.C., Canada: BiTech Publishers (2009).
Green, R. A., and R. M. Ebeling. “Modeling the Dynamic Response of Cantilever Earth-Retaining
Walls Using FLAC,” in FLAC and Numerical Modeling in Geomechanics – 2003 (Proceedings of
FLAC Version 8.0

Gregor, T., B.GarrodandD.Field. “TunnelDesignAnalysisfortheWashingtonDullesInternational
Airport Expansion Program,” in NARMS-TAC 2002: Mining and Tunnelling Innovation and
Opportunity, Vol. 2, pp. 1539-1551. R. Hammah et al., eds. Toronto: University of Toronto Press
(2002).
Grillo, L., F. Alessandrini and R. Meriggi. “A New System for the Construction of Large Shallow
Tunnels by Microtunnelling Technology,” Trenchless Technol. Res., 15(1), 43-58 (2000).
Guarascio, M., M. Fabris and E. Castelli. “Numerical Model Simulation of the Subsidence Induced
by Solution Mining Cavities,” in FLAC and Numerical Modeling in Geomechanics (Proceedings
of the International FLAC Symposium, Minneapolis, Minnesota, September 1999), pp. 233-240.
Günther, R.-M., and K. Salzer Popp. “Advanced Strain – Hardening Approach Constitutive Model
for Rock Salt Describing Transient, Stationary and Accelerated Creep and Dilatancy,” in Proceed-
ings of the 44th U.S. Rock Mechanics Symposium/5th U.S.-Canada Rock Mechanics Symposium
(Salt Lake City, Utah, June 2010), paper no. 10-495. Alexandria, Virginia: ARMA (2010).
Gürtunca, R. G., and I. H. Clark. “Numerical Modeling as a Basis for Evaluating the Effectiveness
of Backfill As Local Support in Deep Mines,” in Innovations in Mining Backfill Technology,
pp. 129-138. Rotterdam: A. A. Balkema, 1989.
Gutiérrez, M. “Shear Band Formation in Rocks with a Curved Failure Surface,” Int. J. Rock Mech.
& Min. Sci., 35(4-5), Paper No. 95 (1998).
Gutiérrez, M., and F. Cuisiat. “Predicting Sub-seismic Faulting from Strain Localisation,” in FLAC
and Numerical Modeling in Geomechanics (Proceedings of the International FLAC Symposium,
Minneapolis, Minnesota, September 1999), pp. 173-181. C. Detournay and R. Hart, eds. Rotter-
dam: A. A. Balkema (1999).
Ha, T., et al. “Numerical Analysis of Fracture Toughness with Chevron Bend Test,” in The Second
HalfCenturyofRockMechanics(11thCongressoftheInternationalSocietyforRockMechanics,
Lisbon, Portugal, July 2007), Vol. 1, pp. 369-371. L. Ribeiro e Sousa, C. Olalla and N. Grossmann,
eds. London: Taylor & Francis Group (2007).
Habimana, J., A. Balakrishnan and S. Vahdani. “Numerical Modeling of Seismic Soil-Structure
Interaction for the Cut-and-Cover Structure BART Warm Spring Extension,” in Geotechnical En-
gineering in the Information Technology Age (CD Proceedings of Geocongress 2006, Atlanta,
Georgia, February-March 2006). D. J. DeGroot et al., eds. Reston, Virginia: ASCE (2006).
Hajiabdolmajid, V., et al. “Modelling Brittle Failure of Rock,” Int. J. Rock Mech. & Min. Sci., 39,
731-741 (2002).
Hajiabdolmajid, V., and P. Kaiser. “Brittleness of Rock and Stability Assessment in Hard Rock
Tunneling,” Tunnel. & Underground Space Tech., 18, 35-48 (2003).
Hajiabdolmajid, V., and P. K. Kaiser. “Modelling Slopes in Brittle Rock,” in NARMS-TAC 2002:
Mining and Tunnelling Innovation and Opportunity, Vol. 1, pp. 331-338. R. Hammah et al.,
eds. Toronto: University of Toronto Press (2002).
FLAC Version 8.0

F2 d410

Recommended

Recommended

More Related Content

Similar to F2 d410

Similar to F2 d410 (20)

Recently uploaded

Recently uploaded (20)

F2 d410