This document provides information on lubricants for passenger vehicles produced by AZMOL, including synthetic, semi-synthetic and mineral engine oils, transmission oils, greases, and antifreezes. It lists various products in each category and provides specifications and performance advantages. Application guidelines are given for choosing the proper lubricant based on ambient temperatures and vehicle/engine requirements.
3. www.azmol.eu Tel.:0-800-504524
LUBRICATING SOLUTIONS FOR PASSENGER VEHICLE S
Greases
Automatic transmission, differentialsEngine oil
Cooling fluids
Ultra Plus 0W-30, 5W-30, 0W-40
Leader Plus 5W-40, 10W-40
Famula X 5W-40, 10W-40, 15W-40
Premium Plus 15W-40
Famula M 5W-40, 10W-40, 15W-40
Super Plus 10W-40, 15W-40
Famula R 10W-40, 15W-40
Diesel Plus 10W-40, 15W-40, 20W-50
Favorite Plus 10W-40, 10W-30, 20W-50
ATF IID
ATF III
Forward Synth 75W-90
Forward Plus 80W-85
Forward Plus 85W-90
Forward Tec 85W-140
Luvana LX
Luvana LC
Luvana EP
Moly CV
How to choose the oil properly
Taking into account the characteristics of your car engine and the ambient temperature, the engine oil is selected according to two main
criteria:
2 operational level
properties by API classification
which must be in accordance with the requirements
for the oil for your vehicle engine (as a rule, it is
indicated in the vehicle's manual).
1 viscosity classification according
SAE, which is selected depending on
ambient air temperature and the
degree of wear of the car engine.
Antifreeze G11
Antifreeze G-12,G-12+,G-12++
3
5. www.azmol.eu Tel.:0-800-504524
AZMOL Ultra Plus 0W-30 is a
highly efficient, energy-saving motor
oil with an average sulfate ash
content, phosphorus and sulfur for
gasoline and diesel engines in
passenger cars and light commercial
vehicles of the last generation.
AZMOL Ultra Plus 5W-30 is a
highly efficient, energy-saving motor
oil. Recommended for modern petrol
and diesel engines for cars and small
trucks requiring oils with reduced
high-temperature viscosity.
AZMOL Ultra Plus 0W-30
AZMOL Ultra Plus 5W-30
SAE 0W-30
API SN/CF
ACEA C3
MB-Approval 229.31/229.51
VW504.00/507.00
Porsche C30
SAE 5W-30
API SN/CF
ACEA C3
MB Approval 229.51/229.31
BNW LL-04
GM dexos 2
Ford 913 D
Index name
AZMOL Ultra
Plus 0W-30
AZMOL Ultra
Plus 5W-30
Kinematic viscosity at 100°С, mm²/s 9,3…12,5 9,5…12,5
Viscosity index 160 155
Total Base Number, mg КОН/g 7,0 8,0
Sulfated ash, % mass 1,0 1,25
Flash point, °С 210 205
Pour point, °С Minus 45 Minus 40
TYPICAL PROPERTIES
SYNTHETIC ENGINE OILS
DESCRIPTION : ADVANTAGES:
• provide perfect work of gasoline,
gas and diesel engines of passenger
cars at all operating modes;
• have excellent energy-saving
properties and therefore considerably
reduce fuel consumption;
• fast oil feed to all lubricated parts
and make the engine start extremely
easy;
• low starting resistance for rotation
of the crankshaft of the engine under
low-temperature starting conditions,
which provides excellent wear
protection.
APPLICATION
MEETS REQUIREMENTS
5
6. www.azmol.eu Tel.:0-800-504524
It is a fully synthetic motor oil for all-
season use under severe operating
conditions for four-stroke gasoline
and diesel engines. The oil is
effective for cooled passenger cars
with forced engines, including
turbocharger, intercooling system for
inflatable air, as well as for promising
models of direct injection diesel
engines (type DI).
AZMOL Ultra Plus 0W-40
SAE 0W-40
API SN/CF
ACEA A3/B4
MB 229.3/229.5
BMW LL-01
VW 502.00/505.00
RN 0700/0710
Porsche A40
Ford 937-A
Index name
AZMOL Ultra
Plus 0W-40
Kinematic viscosity at 100°С, mm²/s 13,0…16,3
Viscosity index 170
Total Base Number, mg КОН/g 7,5
Sulfated ash, % mass 1,2
Flash point, °С 200
Pour point, °С Minus 48
TYPICAL PROPERTIES
SYNTHETIC ENGINE OILS
DESCRIPTION : ADVANTAGES:
• optimal hydrodynamic lubrication
mode at extreme temperatures in the
most severe conditions with long
motion;
• easy start of the engine at any
extreme low temperatures;
• stability of properties during long
intervals of oil change;
• reliable protection of the engine
under critical loads.
MEETS REQUIREMENTS
APPLICATION
6
7. www.azmol.eu Tel.:0-800-504524
Universal all-season engine oil with
low friction coefficient is intended for
use in high-performance gasoline and
diesel engines with direct injection of
cars and light trucks, including
turbocharged, without soot filters
(DPF).
AZMOL Leader Plus 5W-40
SAE 5W-40
API SN/CF
ACEA А3/B4
MB 229.3, 229.5
Renault RN0700/0710
VW 502.00/505.00
BMW LL-01
FIAT 9.55535-N2, 9.55535-Z2
Index name
AZMOL Leader
Plus 5W-40
Kinematic viscosity at 100°С, mm²/s 13,0…16,3
Viscosity index 160
Total Base Number, mg КОН/g 10,0
Sulfated ash, % mass 1,5
Flash point, °С 205
Pour point, °С Minus 40
TYPICAL PROPERTIES
SYNTHETIC ENGINE OILS
DESCRIPTION : ADVANTAGES:
• high thermo-oxidative stability,
which reduces sludge formation and
prevents the formation of deposits
and condensation of oil throughout
its entire life;
• excellent protection against
corrosion wear and helps maintain
engine reliability.
• improved cleaning and dispersing
properties guarantee cleanliness of
the piston group and other important
components of the engine;
• provides easy cold start and fuel
economy.
APPLICATION
MEETS REQUIREMENTS
7
8. www.azmol.eu Tel.:0-800-504524
AZMOL Famula X 5W-40 is
designed for modern turbocharged
and non-turbocharged diesel engines
for use in both short and long-
distance truck modes, with EURO 5
engines with exhaust systems and
engines EURO 3 and EURO 4.
AZMOL Famula M 5W-40 is an for
diesel and gasoline engine without
particulate filters (DPF), as well as
for some engines equipped with a
waste gas recycling system (EGR)
and a selective catalytic reduction
system (SCR). Perfectly suited for
mixed fleets.
AZMOL Famula X 5W-40
AZMOL Famula M 5W-40
Famula M 5W-40
SAE 5W-40
API CJ-4/SN
ACEA E9/C3
CATERPILLAR ECF-3;
CUMMINS CES 20081;
MB 228.31; MAN M3575;
MTU Type 2.1; RENAULT RLD-3;
VOLVO VDS-4
Famula M 5W-40
SAE 5W-40
API CI-4/SL
ACEA E7/B4/A3
Cummins CES 20076/20077
MB 228.3
Renault RLD-2
MTU Type 2
MAN M3275-1
Volvo VDS-3
CATERPILLAR ECF-1a
Index name
AZMOL Famula
X 5W-40
AZMOL Famula
M 5W-40
Kinematic viscosity at 100°С,
mm²/s
14,0…16,3 14,0…16,3
Viscosity index 150 150
Total Base Number, mg КОН/g 9,0 10,5
Sulfated ash, % mass 1,1 1,6
Flash point, °С 210 205
Pour point, °С Minus 38 Minus 38
TYPICAL PROPERTIES
SYNTHETIC ENGINE OILS
DESCRIPTION : ADVANTAGES:
• improved cleaning properties,
prevent formation of deposits;
• prevention of DPF premature
clogging (soot filter) and shortening
maintenance intervals;
• provide constant cleanliness of
engine parts and maximum service
life;
• reduction of friction losses in the
engine and optimum wear protection;
• fast lubrication at cold start
during start-up and minimal friction
during daily driving;
• excellent protection against wear
and corrosion (even in long periods),
high resistance to oxidation.
MEETS REQUIREMENTS
APPLICATION
8
10. www.azmol.eu Tel.:0-800-504524
AZMOL Leader Plus 10W-40 is a
universal all-season engine oil. The
combination of innovative base oils
based on synthetic technology and
the latest additive technology
guarantees a reduction in oil and fuel
consumption and ensures quick
lubrication of the engine in
accordance with the ACEA A3 / B4
standards.
AZMOL Famula X 10W-40 is a
universal engine oil that is designed
for engines with increased load.
Developed with unique high-
performance SAPS additives
combined with special selected base
oils.
AZMOL Leader Plus 10W-40
AZMOL Famula X 10W-40
Leader Plus 10W-40
SAE 10W-40
API SN/CF
ACEA А3/B4
MB 229.3, 229.5;
Renault RN0700/0710;
VW 502.00/505.00;
BMW LL-01; FIAT 9.55535-N2;
9.55535-Z2
Famula X 10W-40
SAE 10W-40
API CJ-4/SN
ACEA E9/C3
MB 228.31; VOLVO VDS-4;
Renault RLD-3; MAN M3575;
Cummins CES 20081;
MTU Type 2.1; Cat ECF-3
Index name
AZMOL Leader
Plus 10W-40
AZMOL Famula
X 10W-40
Kinematic viscosity at 100°С, mm²/s 13,0…16,3 14,0…16,3
Viscosity index 140 140
Total Base Number, mg КОН/g 10,0 9,0
Sulfated ash, % mass 1,5 1,1
Flash point, °С 210 210
Pour point, °С Minus 35 Minus 35
TYPICAL PROPERTIES
SEMY-SYNTHETIC ENGINE OILS
DESCRIPTION : ADVANTAGES:
• provide perfect work of gasoline,
gas and diesel engines of passenger
cars at all operating modes;
• excellent anti-corrosion protection
helps maintain engine reliability.
• fast oil delivery to all lubricated
parts makes the engine start
extremely light;
• Famula X 10W-40 helps to
prevent premature clogging of DPF
(soot filter) and shorten maintenance
intervals;
• provide a firm oil film at high
operating temperatures and at the
same time reduce friction.
APPLICATION
MEETS REQUIREMENTS
10
11. www.azmol.eu Tel.:0-800-504524
AZMOL Favorite Plus 10W-40 is a
multigrade engine oil designed for
modern gasoline and diesel engines
equipped with a turbocharger and
catalyst, passenger cars and
minibuses. Perfect for urban traffic in
the "start-stop" mode.
AZMOL Favorite Plus 10W-30 is
an economical engine oil that is great
for new petrol, diesel and LPG
engines in passenger cars, light
trucks and minivans. Especially
suitable for intense urban driving,
which requires frequent stops.
AZMOL Favorite Plus 10W-40
AZMOL Favorite Plus 10W-30
SAE 10W-40
API SL/CF
ACEA A3/В3
MB 229.1
VW 502 00/505 00
SAE 10W-30
API SL/CF
ACEA A3/B3
MB 229.1
VW 502 00/505 00
Index name
AZMOL Favоrite
Plus 10W-40
AZMOL Favоrite
Plus 10W-30
Kinematic viscosity at 100°С,
mm²/s
14,0…16,0 9,3…12,5
Viscosity index 145 145
Total Base Number, mg КОН/g 8,0 10,0
Sulfated ash, % mass 1,25 1,50
Flash point, °С 200 205
Pour point, °С Minus 35 Minus 35
TYPICAL PROPERTIES
SEMY-SYNTHETIC ENGINE OILS
DESCRIPTION : ADVANTAGES:
• fuel economy and minimum
amount of harmful substances in
exhaust gases;
• perfect work of engines of
modern cars, differing in high specific
power and small volumes of motor
oil;
• reliable lubrication and engine
protection in long-term loaded
modes;
• efficiency in dynamic regimes
(frequent accelerations and
decelerations when driving around
the city);
• stable high protective properties
during winding and in the main
period of operation of the engine.
MEETS REQUIREMENTS
APPLICATION
11
12. www.azmol.eu Tel.:0-800-504524
AZMOL Super Plus 10W-40 is a
universal all-season engine oil
designed for high-speed petrol and
diesel four-stroke engines, including
engines with catalytic converter and
turbocharging. Ideal for cars in mixed
fleets and caravans.
AZMOL Diesel Plus 10W-40 is a
universal high performance diesel
engine (HPD). It is used both in
diesel and gasoline engines of cars,
light trucks and minibuses, as well as
commercial trucks. Especially suitable
for serving a mixed fleet.
AZMOL Super Plus 10W-40
AZMOL Diesel Plus 10W-40
Super Plus 10W-40
SAE 10W-40
API SG/CF-4
ACEA A2/B2/Е2
MB 228.1
MIL-L-46152 EC, MIL-L-2104D
VW 500.00/505.00
Diesel Plus 10W-40
SAE 10W-40
API CG-4/SJ
ACEA A2/В3/E2
MB 228.1
MAN 271
VOLVO VDS/VDS-2
VW 501 01/505 00
MTU Type 1
Index name
AZMOL Super
Plus 10W-40
AZMOL Diesel
Plus 10W-40
Kinematic viscosity at 100°С, mm²/s 14,0…16,3 14,0…16,3
Viscosity index 140 140
Total Base Number, mg КОН/g 9,5 9,2
Sulfated ash, % mass 1,35 1,3
Flash point, °С 205 205
Pour point, °С Minus 35 Minus 35
TYPICAL PROPERTIES
SEMY-SYNTHETIC ENGINE OILS
DESCRIPTION : ADVANTAGES:
• perfectly protects against wear
and maintains cleanliness of the
engine;
• thanks to its unique additives, it
protects against corrosion and aging,
the formation of dirt and soot for
extended intervals between oil
changes;
• the safety of viscosity properties
throughout the service life;
• efficiently when using high sulfur
fuel (S <0.5).
APPLICATION
MEETS REQUIREMENTS
12
13. www.azmol.eu Tel.:0-800-504524
AZMOL Famula M 10W-40 is a
universal high performance diesel
engine SHPD. It is recommended for
use in mixed fleets, which have diesel
high and medium loaded equipment
of Euro-3, Euro-4 classes, as well as
equipment with gasoline engines.
AZMOL Famula R 10W-40 is used
all-season in high-speed four-stroke
diesel engines (including
turbocharging), line-haul trucks,
agricultural and construction
machinery, buses and light trucks.
AZMOL Famula M 10W-40
AZMOL Famula R 10W-40
Famula M 10W-40
SAE 10W-40
API CI-4/SL
ACEA E7/B4/A3
Cummins CES 20077/20076;
MB 228.3; MAN 3275-1;
Volvo VDS-3; Renault RLD-2;
Deutz DQC III; MTU Type 2;
CAT ECF-1a
Famula R 10W-40
SAE 10W-40
API CH-4/SL
ACEA E5/E2/B3/A3
MAN M271
Cummins CES 20076/20077
MB 228.1
Volvo VDS/ VDS-2
Index name
AZMOL Famula
M 10W-40
AZMOL Famula
R 10W-40
Kinematic viscosity at 100°С,
mm²/s
14,0…16,3 14,0…16,3
Viscosity index 145 145
Total Base Number, mg КОН/g 10,5 10,0
Sulfated ash, % mass 1,6 1,5
Flash point, °С 205 205
Pour point, °С Minus 35 Minus 35
TYPICAL PROPERTIES
SEMY-SYNTHETIC ENGINE OILS
DESCRIPTION : ADVANTAGES:
• improved cleansing properties;
• prevent the formation of deposits;
• constant cleanliness of engine
parts and maximum service life;
• reduction of friction losses in the
engine and optimum wear protection;
• fast lubrication at cold start,
during start-up and minimal friction
during daily driving;
• increased neutralizing ability and
excellent corrosion protection.
MEETS REQUIREMENTS
APPLICATION
13
15. www.azmol.eu Tel.:0-800-504524
AZMOL Premium Plus 15W-40 is
designed for high-performance petrol
and diesel four-stroke engines of cars
and minivans, including engines with
catalytic converter and
turbocharging. Engines powered by
fuel with a sulfur content of more
than 0.5% of it’s weigh, as well as by
gas fuels. The best option for mixed
fleets.
AZMOL Super Plus 15W-40 is a
multigrade engine oil designed for
high-speed gasoline and diesel four-
stroke engines, including engines
with catalytic converter and
turbocharging. Ideal for cars in mixed
fleets and caravans.
AZMOL Premium Plus 15W-40
AZMOL Super Plus 15W-40
Premium Plus 15W-40
SAE 15W-40
API SJ/CF
ACEA A3/B3
MB 229.1
VW 501.01/505.00
Super Plus 15W-40
SAE 15W-40
API SG/CF-4
ACEA A2/B2/Е2
MB 228.1
MIL-L-46152 EC, MIL-L-2104D
VW 500.00/505.00
Index name
AZMOL Premium
Plus 15W-40
AZMOL Super
Plus 15W-40
Kinematic viscosity at 100°С,
mm²/s
14,0…16,3 14,0…16,3
Viscosity index 120 125
Total Base Number, mg КОН/g 8,0 9,5
Sulfated ash, % mass 1,2 1,35
Flash point, °С 210 205
Pour point, °С Minus 30 Minus 30
TYPICAL PROPERTIES
MINERAL ENGINE OILS
DESCRIPTION : ADVANTAGES:
• additional protection of power
units of cars due to the engine
cleaning system and a balanced
package of washing and dispersing
additives;
• a small amount of burning and a
small inclination to pouring on the
pistons due to the unique cleaning
and stabilizing additives;
• maximized service interval and
engine life, excellent wear protection;
• protection against corrosion and
aging, formation of dirt and soot
during extended intervals between oil
changes.
APPLICATION
MEETS REQUIREMENTS
15
16. www.azmol.eu Tel.:0-800-504524
AZMOL Famula X 15W-40 is a
universal motor oil that is intended
for engines with increased load.
Designed with unique high-
performance SAPS additives
combined with special selected base
oils.
AZMOL Famula M 15W-40 is a
universal super-high performance
diesel engine (SHPD). It is
recommended for use in mixed
fleets, which have diesel high and
medium loaded equipment of Euro-3,
Euro-4 classes, as well as equipment
with gasoline engines.
AZMOL Famula X 15W-40
AZMOL Famula M 15W-40
AZMOL Famula X 15W-40
SAE 15W-40
API CJ-4/SN
ACEA E9/C3
MB 228.31; VOLVO VDS-4;
Renault RLD-3; MAN M3575;
Cummins CES 20081;
MTU Type 2.1; Cat ECF-3
AZMOL Famula M 15W-40
SAE 15W-40
API CI-4/SL
ACEA E7/B4/A3
Cummins CES 20077/20076;
MB 228.3; MAN 3275-1;
Volvo VDS-3; Renault RLD-2;
Deutz DQC III; MTU Type 2;
CAT ECF-1a
Index name
AZMOL Famula
X 15W-40
AZMOL Famula
M 15W-40
Kinematic viscosity at 100°С,
mm²/s
14,0…16,3 14,0…16,3
Viscosity index 135 130
Total Base Number, mg КОН/g 9,0 10,5
Sulfated ash, % mass 1,1 1,6
Flash point, °С 215 210
Pour point, °С Minus 30 Minus 30
TYPICAL PROPERTIES
MINERAL ENGINE OILS
DESCRIPTION: ADVANTAGES:
• Famula X 15W-40 prevents
premature clogging of the DPF (soot
filter) and helps to reduce
maintenance intervals;
• excellent lubricating
characteristics and stable oil film on
wear-resistant parts under various
engine operating conditions;
• improved dispersing properties of
oils reduce the tendency to thicken;
• excellent protection against wear
and corrosion (even in long periods),
high oxidation resistance, maximum
engine cleanliness;
• maximum engine power due to
high antifriction properties.
APPLICATION
MEETS REQUIREMENTS
16
17. www.azmol.eu Tel.:0-800-504524
AZMOL Famula R 15W-40 is used
in most petrol engines for cars,
commercial vehicles and trucks that
operate under all operating
conditions. The oil guarantees
reliable operation of the engine
under extreme loads.
AZMOL Diesel Plus 15W-40 HPD
(High Performance Diesel) is a
universal motor oil that is intended
for use in a wide variety of
automotive vehicles, both diesel and
gasoline engines for passenger cars,
light trucks and minibuses.
Especially suitable for serving in
mixed fleets.
AZMOL Famula R 15W-40
AZMOL Diesel Plus 15W-40
Famula R 15W-40
SAE 15W-40
API CH-4/SL
ACEA E5/E2/B3/A3
MAN M271
Cummins CES 20076/20077
MB 228.1
Volvo VDS/ VDS-2
Diesel Plus 15W-40
SAE 15W-40
API CG-4/SJ
ACEA A2/В3/E2
MB 228.1
MAN 271
VOLVO VDS/VDS-2
VW 505.00/50.01
MTU Type 1
MAC EO-L
Index name
AZMOL Famula
R 15W-40
AZMOL Diesel
Plus 15W-40
Kinematic viscosity at 100°С,
mm²/s
14,0…16,3 14,0…16,3
Viscosity index 130 145
Total Base Number, mg КОН/g 10,0 10,0
Sulfated ash, % mass 1,5 1,5
Flash point, °С 210 205
Pour point, °С Minus 30 Minus 35
TYPICAL PROPERTIES
MINERAL ENGINE OILS
DESCRIPTION: ADVANTAGES:
• easy engine start at negative
temperatures;
• the safety of viscosity properties
throughout the service life;
• effective in using fuel with high
sulfur content (S <0.5);
• prevent the formation of high-
temperature (laquers) and low-
temperature (sludges) deposits;
• reduction of friction losses in the
engine and optimum wear protection.
MEETS REQUIREMENTS
APPLICATION
17
18. www.azmol.eu Tel.:0-800-504524
AZMOL Favorite Plus 20W-50 is a
high-quality engine oil for 4-stroke
gasoline (multi-valves, with
turbocharging) and diesel engines
(with or without turbocharging) of
passenger cars and light trucks.
Recommended for areas with hot
climates.
AZMOL Diesel Plus 20W-50 HPD
(High Performance Diesel) is a
universal motor oil. It is used in the
most diverse vehicles, both diesel
and gasoline engines of passenger
cars, light trucks and minibuses.
Recommended for cars with large
mileage.
AZMOL Favorite Plus 20W-50
AZMOL Diesel Plus 20W-50
Favorite Plus 20W-50
SAE 20W-50
API SL/CF
ACEA A3/В3
MB 229.1
VW 501.01/505.00
Diesel Plus 20W-50
SAE 20W-50
API CG-4/SJ
ACEA A2/В4/E2
MB 228.1
MAN 271
VOLVO VDS
Index name
AZMOL Favorite
Plus 20W-50
AZMOL Diesel
Plus 20W-50
Kinematic viscosity at 100°С,
mm²/s
17,5…21,9 17,5…20,5
Viscosity index 125 125
Total Base Number, mg КОН/g 10,0 10,5
Sulfated ash, % mass 1,5 1,5
Flash point, °С 220 210
Pour point, °С Minus 28 Minus 25
TYPICAL PROPERTIES
MINERAL ENGINE OILS
DESCRIPTION : ADVANTAGES:
• increased washing-dispersing
properties to maintain the cleanliness
of engine parts and prevent
sedimentation and formation of
particles;
• high thermal stability and
resistance to oxidation prevent
premature decomposition at high
temperature;
• high anti-corrosion and anti-foam
properties;
• shear resistance, good lubricant
when used, both in hot weather and
in cold weather.
MEETS REQUIREMENTS
APPLICATION
18
20. www.azmol.eu Tel.:0-800-504524
Synthetic transmission oil (Total
DriveLine class), for mechanical
transmissions (synchronized or
unsynchronized), bridges in cars and
trucks, construction and agricultural
machinery, working in the most
difficult mode. Recommended in
cases where good work at high
temperatures and smooth gear
shifting at low temperatures is
required .
AZMOL Forward Synth 75W-90
SAE 75W-90
API GL-4/GL-5/MT-1
MAN 341 Z2
MAN 342 S1
SCANIA STO 1.0
ZF TE-ML 02B/05A/12L/12N/
16F/17B/19C/21A
Index name
AZMOL Forward
Synth 75W-90
Kinematic viscosity at 100°С, mm²/s 13,5…18,5
Viscosity index 150
Flash point, °С 175
Pour point, °С Minus 42
balls machine:
• scuff index, Н
• welding load, Н
490
3283
TYPICAL PROPERTIES
TRANSMISSION OILS
DESCRIPTION : ADVANTAGES:
• provides resistance to oxidative
processes and high-temperature
formations, dyeing, pitting, scuffing
and premature wear of transmission
parts;
• balanced friction characteristics,
due to which the life of the
synchronizers of the boxes is
significantly prolonged;
• an obstruction in the process of
lubrication and the use of oil in a wide
temperature range;
• excellent compatibility with
surfaces of elastomeric materials.
APPLICATION
MEETS REQUIREMENTS
20
21. www.azmol.eu Tel.:0-800-504524
It is a transmission oil on a mineral
basis with a package of additives of
the new generation with unique anti-
scuffing characteristics (Extreme
Pressure). Recommended as
multigrade oil for lubrication of
loaded mechanical transmissions,
transmission boxes of passenger
cars, distribution boxes of four-wheel
drive cars containing cylindrical,
conical and helical-conical gear units
for cars and trucks operating in
moderately tough conditions and
requiring API GL-5 oils.
AZMOL Forward Plus 80W-85
SAE 80W-85
API GL- 5
MB-Approval 235.1
MAN 341 TYPE E1, Z1, Z2
ZF TE-ML 02A, 02B, 17A
Index name
AZMOL Forward Plus
80W-85
Kinematic viscosity at 100°С, mm²/s 11,5
Viscosity index 95
Flash point, °С 200
Pour point, °С Minus 25
4 balls machine:
• scuff index, Н
• welding load, Н
• diameter of the wear spot, mm
400
3283
0,5
TYPICAL PROPERTIES
TRANSMISSION OILS
DESCRIPTION : ADVANTAGES:
• high anti-scuffing, anti-wear and
anti-pitting properties;
• stable oiling film;
• excellent resistance to oxidation
and aging, excellent viscosity and
temperature properties;
• good anti-foam properties;
• excellent cold start characteristics
and excellent anti-wear protection
during winter conditions.
MEETS REQUIREMENTS
APPLICATION
21
22. www.azmol.eu Tel.:0-800-504524
Forward Tec 85W-140 is a highly
efficient mineral oil for medium- and
heavy-loaded gears and leading axles
for road and off-road vehicles.
Recommended for use in hypoid
gears, gearboxes of wheel hubs,
gearboxes, PTOs and differentials.
Forward Plus 85W-90 is a mineral
based oil with a new generation of
additive package with unique anti-
scuffing characteristics (Extreme
Pressure). Recommended as
multigrade oil for synchronized and
unsynchronized gearboxes with
manual control, high loaded hypoid
gears, gearboxes, bridges, steering
gears.
AZMOL Forward Tec 85W-140
AZMOL Forward Plus 85W-90
TYPICAL PROPERTIES
TRANSMISSION OILS
DESCRIPTION : ADVANTAGES:
Forward Tec 85W-140 contains in
its composition special additives that
form a protective oil film for optimum
corrosion protection. The viscosity
class 85W-140 has excellent fluidity
at low temperatures to achieve
optimal performance at any time of
the year. Provides superior protection
against pitting, sсfffing and wear.
Forward Plus 85W-90 has
excellent anti-wear and anti-corrosive
properties. Reduces wear and noise
when the transmission is operating.
The stable viscosity-temperature
characteristics provide reliable
operation of the transmission at wide
temperature intervals. Compatible
with gaskets and seals.
APPLICATION
MEETS REQUIREMENTS
Index name
Forward Tec
85W-140
Forward Plus
85W-90
Kinematic viscosity at 100°С,
mm²/s
24,0…32,5 15,5…19,0
Viscosity index 92 95
Flash point, °С 210 200
Pour point, °С Minus 15 Minus 20
4 balls machine:
• scuff index, Н
• welding load, Н
519
3920
490
3479
SAE 85W-140
API GL-5
MIL-L 2105 D
ZF TE-ML 05A, 12Е, 16D, 21А
SAE 85W-90
API GL-5
MAN 342N
MB 235.0
ZF TE-ML 07A, 12A, 16C, 17B,
19B, 21А
22
24. www.azmol.eu Tel.:0-800-504524
AZMOL ATF DEX IID is a universal
transmission liquid (ATF) with
working level DEXRON II (D) for all
automatic transmissions in trucks and
cars in accordance with the
manufacturer's recommendation.
Provides stable operation even in
high load conditions. Used in power
steering systems and hydraulic
systems.
AZMOL ATF DEX III is a
transmission liquid for use in
automatic gearboxes, where Dexron
III, Mercon is recommended. Used as
a liquid for a power steering
mechanism. This product is also
suited for use in SUVs, hydraulic
systems and mechanical
transmissions.
AZMOL ATF DEX II D
AZMOL ATF DEX III
GM Dexron® IID
MB 236.6
MAN 339D
Allison C-4
CATERPILLAR TO-2
FORD M2C-138-CJ
FORD M2C 166-H
ZF TE-ML 04D/09A/14B/16L
GM 6137M
GM Dexron® III
Ford Mercon
Allison C-4
MAN 339 V1/Z1(F)
CAT TO-2
ZF TE ML 02F/04D/11B/14A/17C
MB 236.1, 236.5
Index name
AZMOL
ATF DEX IID
AZMOL
ATF DEX III
Kinematic viscosity at 100°С,
mm²/s
7,0 … 8,0 7,0 … 8,0
Viscosity index 150 170
Flash point, °С 185 175
Sulfated ash, % mass 0,1 0,1
Pour point, °С Minus 42 Minus 45
4 balls machine:
• diameter of the wear spot, mm 0,5 0,5
TYPICAL PROPERTIES
TRANSMISSION LIQUIDS
DESCRIPTION : ADVANTAGES:
• soft and smooth gear shift, as
well as loss enhancement in heavy
traffic modes;
• excellent low-temperature fluidity
facilitates starting and rapid
lubrication at low ambient
temperatures;
• good thermal oxidative stability;
• an obstacle to the formation of
lacquers, sludge deposits, the purity
of transmissions and effective work
throughout the service life;
• compatibility with all common seal
materials.
MEETS REQUIREMENTS
APPLICATION
24
25. www.azmol.eu Tel.:0-800-504524
GREASES
Decrease of coefficient of friction on a surface
Increase the slip of the working elements
Cooling mechanisms and heat removal
Protection of conjugated surfaces from scuffing and
corrosion
25
26. www.azmol.eu Tel.:0-800-504524
AZMOL LUVANA LX 2 is a highly
efficient universal lubricant with
extended service life on the basis of
lithium complex. Provides stable
operation in high temperature,
moisture, shock loads and extended
replacement intervals.
AZMOL LUVANA EP 2 is
recommended for lubrication of
mechanically high loaded rolling and
sliding bearings of all industry fields,
operating at medium rotation speeds,
as well as at medium and elevated
temperatures.
AZMOL LUVANA LX
AZMOL LUVANA EP
TYPICAL PROPERTIES
GREASES
DESCRIPTION : ADVANTAGES:
They have excellent resistance to
water washing, increased mechanical
stability, as well as high load bearing
capacity (an anti-scuffing additive
ensures the ability to withstand large
and shock loads without breaking the
oil film). Provide high level of
equipment protection, help to extend
its service life.
APPLICATION
MEETS REQUIREMENTS
Index name
AZMOL
LUVANA LX 2
AZMOL
LUVANA EP 2
Thickener k-Li Li
Colour Dark blue Brown
Application temperature, °С
-30 / +150
(170)
-30 / +130
Penetration at 25°С, 0,1 mm 265-295 265-295
Dropping point, °С, not less than 260 190
4 balls machine:
• welding load, Н
• diameter of the wear spot, mm
3250
0,5
2800
0,6
AZMOL LUVANA LX 2
NLGI 2
DIN 51502: KP2N-30
ISO 6743-9: L-XBDHB 2
AZMOL LUVANA EP 2
NLGI 2
DIN 51502: KР2К-30
ISO 6743-9: L-XCCEB 2
26
27. www.azmol.eu Tel.:0-800-504524
Lithium lubricant with molybdenum
disulphide for operation at ultrahigh
pressures. Recommended for protection
against wear, corrosion, water washing
and high temperature oxidation. It is
used to lubricate heavy-loaded rubbing
surfaces, hinges and pivots of
automobile chassis, mobile machinery,
agricultural and construction machinery
and other heavy-loaded equipment.
AZMOL MOLY CV
NLGI 2
DIN 51502: KРF2K-40
ISO 6743-9: L-XCDBB 2
TYPICAL PROPERTIES
GREASES
DESCRIPTION : ADVANTAGES:
The lubricant contains molybdenum
disulphide, which gives additional wear
resistance under conditions of slipping
and vibration, improved protection
against corrosion of the system's
components, even when flooding the
grease. Protects equipment and
extends its life, reduces maintenance
costs and improves the overall
efficiency of the equipment.
MEETS REQUIREMENTS
APPLICATION
Index name
AZMOL
MOLY CV 2
Thickener Li
Colour Black
Application temperature, °С -40 / +130
Penetration at 25°С, 0,1 mm 265-295
Dropping point, °С, not less than 190
4 balls machine:
• welding load, Н 4900
27
28. www.azmol.eu Tel.:0-800-504524
Universal lubricant based on a
mixture of mineral oils, thickened
with lithium-calcium soap. It is
intended for lubrication of roller
bearings, joints, chassis, sliding
supports and other mechanisms in
industrial equipment, agricultural
machinery and off-road machinery,
which is used in the presence of
moisture and dust (without direct
penetration), shock loads and
vibration. Contains a number of
functionally active ingredients and an
anti-scuffing EP additive.
AZMOL LUVANA LC 2
TYPICAL PROPERTIES
GREASES
DESCRIPTION : ADVANTAGES:
Suitable for use under complicated
operating conditions and at high
loads, including in dusty and humid
conditions. Long-lasting firmness and
durability guarantee a wide range of
economical applications.
APPLICATION
MEETS REQUIREMENTS
Index name AZMOL LUVANA LC 2
Thickener Li-Ca
Colour Red
Application temperature, °С -30 / +120
Penetration at 25°С, 0,1 mm 265-295
Dropping point, °С, not less than 185
4 balls machine:
• welding load, Н 2300
NLGI 2
DIN 51502: KР2К-30
ISO 6743-9: L-XBDEB 2
28
29. www.azmol.eu Tel.:0-800-504524
29
Cooling the engine and maintaining it optimum
temperature
Protection of the cooling system from freezing,
corrosion, scale and cavitation
It is a lubricant for the pump
ANTIFREEZES
30. www.azmol.eu Tel.:0-800-504524
AZMOL ANTIFREEZE G-11
AZMOL ANTIFREEZE G-12
Antifreeze G-11
ASTM D 3306, D 4985
SAE J 1034
VW/Audi/Seat/Skoda TL
774-C(G11)
BMW GS 9400
MAN 324 NF
MB 325.0
Antifreeze G-12
ASTM D3306/D4985/D6210
SAE J 1034
VW TL 774-D (G12)
MTU MTL 5048
MB 325.3
MAN 324
TYPICAL PROPERTIES
ANTIFREEZES
DESCRIPTION : ADVANTAGES:
Antifreeze G-11 protects against
corrosion and scale of aluminum and
copper cooling systems. It does not
foam, it is neutral to the rubber and
plastic parts of the cooling system.
Antifreeze G-12 is an antifreeze for
cooling systems of modern engines,
especially with aluminum parts. It
does not contain amines, nitrites,
phosphates and silicates. Provides
unrivaled protection against
corrosion, has excellent detergent
and lubricating properties.
MEETS REQUIREMENTS
APPLICATION
Index name
AZMOL ANTIFREEZE
G-11 G-12
Colour Blue Red
Density at 20°С, kg/m3 1,065 – 1,085
Crystallization temperature °С Minus 38 Minus 38
Hydrogen index рН units within 7,5 7,5
Antifreeze G-11 is a ready-made
solution that does not require dilution
and protects the car's cooling system
at temperatures down to -40 ° C. It
is intended for year-round use in
modern aluminum and copper cooling
systems.
Antifreeze G-12 is ready for use
antifreeze. Does not freeze to -38 °
C. It is used in all systems of cooling
of internal combustion engines of
cars, light and heavy trucks, buses,
construction and agricultural
machinery, it does not contain
silicates, phosphates, chromates,
nitrites or boron, it is inert to the
materials of gaskets and seals.
30
31. www.azmol.eu Tel.:0-800-504524
Antifreeze G-12 + is a ready-made
solution based on monoethylene
glycol with the use of a high-tech
additive package on a carboxylate
basis. Recommended for engines
requiring improved heat dissipation -
high-performance engines,
turbocharged engines.
Antifreeze G-12 ++ is a ready-to-
use antifreeze for engine cooling
system. Does not freeze to -38 ° C.
Designed for reliable and efficient
operation of the engine cooling
system. Has a maximum reserve of
corrosion protection.
AZMOL ANTIFREEZE G-12+
AZMOL ANTIFREEZE G-12++
TYPICAL PROPERTIES
ANTIFREEZES
DESCRIPTION : ADVANTAGES:
Antifreeze G-12+ successfully
prevents corrosion of ferrous and
non-ferrous metals, as well as high-
temperature corrosion of aluminum
alloys. Does not contain phosphates,
nitrites, amines. Neutral with respect
to the following metals and alloys:
brass, copper, alloy steel, cast iron,
aluminum. Has an extended service
life in cooling systems.
Antifreeze G-12++ is safe for
aluminum and alloys, synthetic
materials and rubber, does not have
an aggressive effect on plastic.
Provides optimum thermal conditions
for the engine in all operating modes.
APPLICATION
MEETS REQUIREMENTS
Antifreeze G 12+
ASTM D3306/D4985/D6210
SAE J 1034
VW TL 774-D (G 12)
VW TL 774-F (G 12+)
MAN 324 type SNF
MB 325.3
Ford WSS-M 97B44-D
Antifreeze G-12++
VW TL 774-G (G12++)
ASTM D3306/D4656/D4985
MAN 324 Typ Si-OAT
Ford WSS-M97B44-D
MB 325.5/325.6
Index name
AZMOL ANTIFREEZE
G-12+ G-12++
Colour Red Pink to red
Density at 20°С, kg/m3 1,065 – 1,085 1,065 – 1,085
Crystallization temperature °С Minus 38 Minus 38
Hydrogen index рН units within 7,5 7,5
31
32. www.azmol.eu Tel.:0-800-504524
AZMOL ANTIFREEZE
G-12, G-12+, G-12++
Antifreeze G12
Antifreeze G12+
ASTM D3306/D4985/D6210
SAE J 1034
VW TL 774-D (G12)
VW TL-774-D/F (G12 +)
MB 325.3
Ford: WSS-M97B44-D(G12+)
MAN 324 SNF
Antifreeze G12++
VW TL 774-G (G12++)
ASTM D3306/D4656/D4985
MAN 324 Typ Si-OAT
Ford WSS-M97B44-D
MB 325.5/325.6
TYPICAL PROPERTIES
ANTIFREEZES. CONCENTRATES
DESCRIPTION: ADVANTAGES:
Antifreeze G-12 significantly
extends the service life of aluminum
components (organic acid
technology) and the entire cooling
system as a whole.
Antifreeze G-12+ is an improved
modification of the G-12. The
temperature characteristic of boiling
and the service life remained the
same, but this kind of antifreeze is
used on modern cars.
Antifreeze G-12++. Lobrid
technology at its manufacturing gives
the chance to eliminate a principal
defect of antifreezes G-12 and G-12
+ - not only to eliminate corrosion
when it already appeared, but also to
perform preventive action (Lobrid or
SOAT coolants).
MEETS REQUIREMENTS
APPLICATION
Antifreeze G-12, G-12+ are
developed on carboxylate
technology, which helps to protect
the engine from overheating, misting,
scaling and corrosion. Do not contain
nitrites, amines and phosphates.
Used for radiators of all types, ideal
for aluminum parts.
Antifreeze G-12++ is an all-
season coolant due to high-quality
silicon additive package provides
excellent corrosion protection and
heat dissipation, which prevents
engine overheating in the summer
and freezing of liquid in the cooling
system. The product is compatible
with rubber seals and hoses, as well
as with engines that are made of
aluminum.
Index name
AZMOL ANTIFREEZE
G-12 G-12+ G-12++
Colour Red Pink to red
Density at 20°С, kg/m3 1,085 – 1,150
Crystallization temperature °С Minus 35*
Hydrogen index рН units within 7,0* 7,0* 7,0*
* when diluted with distilled water in a volume ratio of 1: 1
32