Skin Effect Cables are widely used to Industrial Heat Tracing System.

1. TXLP/1 Electric Floor Heating Cable System
TXLP/1 Electric Floor Heating Cable System
SKEF
Skin effect cables are specially designed to be used for long pipe systems.
Skin effect heating cable can be used for temperature maintenance,
anti-freezing, heating and other areas.
The skin effect heating cable needs to be loaded in a carbon steel pipe.
The current reaches the end of the steel pipe through the conductor in
the process of using, and under the action both of field effect and skin
effect，the current concentrated toward the inner surface of the heating
pipe.The electromagnetic effect makes the return current all concentrated
in the heating tube inner surface, there are almost no voltage and current
could be detected on the outer surface.
The current runs through the resistance impedance while
returning to the surface of the heating pipe and generates
heat.The skin effect cable can withstand continuous exposure
temperatures up to 230℃, and is suitable for use in hazardous
locations and in areas exposed to corrosives. Skin effect cable
can be used for continuous circuit lengths to 20000 meter
(2*10000m), powered from a single source.For additional
information, contact your Jiahong representative or call Jiahong
at 800-868-5676.
Actual designs require consideration of many important variables and must be confirmed by Jiahong. Also, many voltages and
electrical configurations are possible.
•Durable construction.
•Output power up to 120W/m.
•The heating body is a steel tube, and the structure is firm, no need
to maintenance and repair.
•Highly heat conduction efficiency .
•Easy to monitor and control.
•Safely: Fully grounded system
with zero electrical potential on
pipe surfaces.
•The maintenance temperature
could up to 200℃ and could
withstand continuous exposure
temperatures up to 230℃ with
power off.
Longline Capability: Circuit lengths up to 20 kilometers from a single
power source.
Area classification
Output
Antifreeze protection area
High power output
High exposure temperature
Hazardous area,
15-120W/m
www.ahjiahong.comWuhu jiahong New Material Co.,Ltd
Tel:0086 553 3887096 Fax:0086 553 3887097
Nominal sectional area 5-30mm2
Supply Voltage Maximum 5000Vac
Max. maintenance temperature 200℃
Max. continuous exposure temperature(Power off) 230℃
Maximum length of use 10km
Min. installation temperature -40℃
Min. bending radius 20D