1. INDUS OVERSEAS 1.2.2017
DIMENSIONAL & TENSILE TEST REPORT
TESTING STANDARDS
INDUS OVERSEAS
ITEM MINIMUM TENSILE TO BE APPLIED
DF 3030 06 TON
DF 4040 08 TON
DF 4050 10 TON
DF 5050 10 TON
3516 P 03 TON
LOAD APPLIED :- LINEAR IN VERTICAL POSITION AS PER FIXTURE & VIDEO GIVEN.
PROCESS PERFORMED
:- FORGED,HARDENED, TEMPERED, ZINC PLATING,PACKING.
PICKING OF SAMPLING :- RANDOM SAMPLES PICKED FROM PACKING ROOM.
QUANTITY OF SAMPLES :- 100 PIECES PER LOT PICKED FROM DIFFERENT TABLES .
APPLICATION OF SAMPLES :- ALL SAMPLES PICKED WERE SUBJECT TO TENSILE TEST
ALL PASS :- MEANS PIECE TOOK ITS APPLIED LOAD WITHOUT ANY BREAKAGE.
TEMPERATURE :- 20 DEGREE CELCIUS TO 25 DEGREE CELCIUS
TEST PERFORMED BY :- SUPERVISOR HARI OM
UNDER GUIDANCE OF :- MR. AMAN GUPTA

2. 2 of 5
DIMENSIONAL & TENSILE TEST REPORT
ITEM : 3030DF
PARTY’S NAME :
BUYER P.O. :
DATE : 1.2.2017
MATERIAL : EN 8 D
FOR USE WITH WEBBING OF : 30 MM
SPECIFIED DIMENSIONS OBSERVATIONS
S.# Specified
Dimensions
(mm)
1 2 3 4 5 6 7 8 9 10
A 101-104 102.6 102.6 102.5 102.6 102.6 102.6 102.5 102.7 102.5 102.6
B 55-56 55.1 55.1 55.0 55.0 55.2 55.1 55.2 55.1 55.0 55.2
C 33-34 33.4 33.5 33.5 33.4 33.6 33.4 33.5 33.6 33.4 33.4
D1 / D2 14-15 14.0 14.1 14.0 14.1 14.0 13.9 13.9 14.0 14.1 14.0
E(MIDDEL) 30.5 – 32 30.8 30.7 30.8 30.7 30.9 30.7 30.8 30.7 30.9 30.9
F(MIDDEL) 12-12.5 12.1 12.0 12.0 12.2 12.1 12. 212.1 12.1 12.0 12.2
G1 / G2 9-9.5 9.4 9.5 9.3 9.5 9.4 9.3 9.4 9.3 9.5 9.4
H1 7-7.5 7.5 7.5 7.4 7.4 7.4 7.5 7.5 7.4 7.4 7.5
H2 8-9 9.0 9.0 8.9 8.9 9.0 8.9 8.9 9.0 8.9 9.0
HARD MARKING OWB 3030 DF B/S 60 KN
MISMATCH : WITH IN TOLERANCES
SURFACE FINISH ZINC PLATED AS PER EU STANDARDS
MINIMUM LINEAR BL
SPECIFIED 3 TON
MINIMUM LINEAR
TESTING LOAD
APPLIED
6 TON
MAXIMUM LINEAR
TESTING LOAD
APPLIED
7.0 TON
ULTIMATE BREAKING
LOAD ACHIEVED
(LOWEST)
10.0 TON
RESULT OF 100 PCS 100% PASS
WEIGHT IN GRAMS 190 to 210 , 200 Gms Average
REMARKS OK

3. 3 of 5
DIMENSIONAL & TENSILE TEST REPORT
ITEM : 4040DF
PARTY’S NAME :
BUYER P.O. #
DATE : 1.2.2017
MATERIAL : EN 8 D
FOR USE WITH WEBBING OF : 40 MM
SPECIFIED DIMENSIONS OBSERVATIONS
S.# Specified
Dimensions
(mm)
1 2 3 4 5 6 7 8 9 10
A 103-105.5 104.3 104.3 104.4 104.4 104.3 104.5 104.5 104.4 104.3 104.3
B 64-65 64.3 64.3 64.2 64.2 64.3 64.5 64.4 64.4 64.4 64.3
C 42-43 42.1 42.0 42.0 42.1 42.1 42.1 42.0 42.1 42.0 42.1
D 14-15 14.6 14.7 14.5 14.6 14.7 14.6 14.7 14.6 14.5 14.6
E(MIDDEL) 28-30 28.8 28.7 28.8 28.9 28.8 28.9 28.7 28.9 28.7 28.8
F(MIDDEL) 12-13 12.5 12.4 12.5 12.6 12.5 12.4 12.6 12.5 12.4 12.5
G 9.5-10.5 9.9 10.0 9.8 9.9 9.9 9.9 10.0 9.8 9.9 9.9
H 10-11 10.3 10.4 10.4 10.3 10.2 10.2 10.3 10.4 10.3 10.4
HARD MARKING OWB 4040 DF B/S 80 KN
MISMATCH : WITH IN TOLERANCES
SURFACE FINISH ZINC PLATED AS PER EU STANDARDS
MINIMUM LINEAR BL
SPECIFIED
4 TON
MINIMUM LINEAR
TESTING LOAD
APPLIED
8 TON
MAXIMUM LINEAR
TESTING LOAD
APPLIED
9 TON
ULTIMATE BREAKING
LOAD ACHIEVED
(LOWEST)
NO BREAK ACHIEVED ON APPLYING 9.0 TONS
RESULT OF 100 PCS 100% PASS
WEIGHT IN GRAMS 270 to 290, 280 Gms Average
REMARKS OK

4. 4 of 5
DIMENSIONAL & TENSILE TEST REPORT
ITEM : 4050 DF
PARTY’S NAME :
BUYER P.O. #
DATE : 1.2.2017
MATERIAL : EN 8 D
FOR USE WITH WEBBING OF : 40 MM
SPECIFIED DIMENSIONS OBSERVATIONS
S.# Specified
Dimensions
(mm)
1 2 3 4 5 6 7 8 9 10
A 106-108 107.0 107.0 107.1 107.1 106.9 106.9 107.1 107.1 107.0 106.9
B 63 – 67 65.7 65.7 65.6 65.6 65.8 65.8 65.8 65.6 65.7 65.7
C 40-42 41.3 41.2 41.3 41.3 41.4 41.2 41.4 41.2 41.3 41.3
D 13 – 15 14.2 14.1 14.2 14.2 14.1 14.3 14.2 14.2 14.3 14.3
E(MIDDEL) 30 – 33 31.4 31.4 31.3 31.4 31.5 31.5 31.4 31.5 31.3 31.4
F(MIDDEL) 9 – 12 11.5 11.4 11.5 11.6 11.4 11.5 11.4 11.6 11.4 11.5
G 11 – 13 11.6 11.4 11.5 11.6 11.6 11.4 11.5 11.5 11.6 11.6
H 12 – 14 12.7 12.6 12.7 12.6 12.8 12.7 12.7 12.6 12.8 12.7
HARD MARKING OWB 4050 DF B/S 100 KN
MISMATCH : WITH IN TOLERANCES
SURFACE FINISH ZINC PLATED AS PER EU STANDARDS
MINIMUM LINEAR BL
SPECIFIED
5 TON
MINIMUM LINEAR
TESTING LOAD
APPLIED
10 TON
MAXIMUM LINEAR
TESTING LOAD
APPLIED
11 TON
ULTIMATE BREAKING
LOAD ACHIEVED
(LOWEST)
NO BREAK ACHIEVED ON APPLYING 11.00 TONS
RESULT OF 100 PCS 100% PASS
WEIGHT IN GRAMS 340 to 360, 350 Gms Average
REMARKS OK

5. 5 of 5
DIMENSIONAL & TENSILE TEST REPORT
Approved & Authenticated by:-
Gaurav Gupta
Indus Overseas
www.indusforge.com
For Clarifications or Enquiries please Email at :- Indusforge@gmail.com
Updation Date 1.2.17
5 of 5 …End of Document
ITEM : 5050DF
PARTY’S NAME :
BUYER P.O. #
DATE : 1.2.2017
MATERIAL : EN 8 D
FOR USE WITH WEBBING OF : 50 MM
SPECIFIED DIMENSIONS OBSERVATIONS
S.# Specified
Dimensions
(mm)
1 2 3 4 5 6 7 8 9 10
A 111-113 112.4 112.3 112.4 112.5 112.3 112.4 112.4 112.5 112.4 112.5
B 75-76 75.8 75.7 75.7 75.8 75.9 75.9 75.8 75.7 75.8 75.9
C 51-52 51.7 51.6 51.7 51.6 51.7 51.8 51.8 51.7 51.6 51.7
D 14-15 14.6 14.5 14.6 14.4 14.4 14.6 14.5 14.5 14.6 14.4
E(MIDDEL) 30-31 30.8 30.8 30.9 30.7 30.9 30.7 30.8 30.9 30.7 30.8
F(MIDDEL) 15-15.5 15.1 15.2 15.1 15.1 15.0 15.0 15.1 15.1 15.2 15.2
G 11-12 11.3 11.3 11.4 11.2 11.3 11.4 11.2 11.1 11.2 11.4
H 11-13 11.6 11.5 11.5 11.6 11.6 11.5 11.6 11.6 11.7 11.7
HARD MARKING OWB 5050 DF B/S 100 KN
MISMATCH : WITH IN TOLERANCES
SURFACE FINISH ZINC PLATED AS PER EU STANDARDS
MINIMUM LINEAR BL
SPECIFIED
5 TON
MINIMUM LINEAR
TESTING LOAD
APPLIED
10 TON
MAXIMUM LINEAR
TESTING LOAD
APPLIED
11 TON
ULTIMATE BREAKING
LOAD ACHIEVED
(LOWEST)
NO BREAK ACHIEVED ON APPLYING 11.00 TONS
RESULT OF 100 PCS 100% PASS
WEIGHT IN GRAMS 360 to 380, 370 Gms Average
REMARKS OK