Courses offered by Forklift Training Toronto

1. Courses Offered by
Forklift Training
Toronto
www.forklifttrainingintoronto.com

2. Counter Balance Forklift Training
 Related Legislation And
Guidelines
 Causes Of Accidents Including
Injury And Damage
 Load Integrity And Selection
 Operator Responsibility
 Dock Area Safety
 Pedestrian Awareness
 Truck/ Trailer Inspection
 Loading/ Off-Loading Procedures

3. Narrow Aisle/ Reach Lift
 The legislative requirements
(Government Regulations, CSA
Standards and Manufacturers’
Guidelines and Principles
 The duties and responsibilities of
workplace stakeholders
 Pre-shift inspections
 Safe operating and load handling
procedures
 Pedestrian safety and the proper use
of hand signals
 Propane and battery handling
techniques.

4. Order Picker Training
 Course Introduction
 Related safety regulations
 Machine maintenance
 Hazard Prevention
 Related Government Legislation
 Fuel Safety For Both Electric And
Propane Equipment
 Safe Operating Procedures
 Responsibilities Of The Workers,
Supervisors And Employers

5. Pallet Walkie
 Theoretical Training
 Practical Training
 Assessment
 Certification

6. Scissor Lift
 Scissor lifts forklift trucks are used to
carry out at-height operations.
 We consider equipment capabilities
and apply safe work practices, our
course gives an overview of the safety
standards for aerial, boom, and scissor
lift operations.

7. Dockstocker
 Theoretical and practical knowledge
 Pre-inspection, safety training and
hazard prevention
 Standard Operating Procedures: circle
check, forwards/reverse on plain
ground, startup and shut down, parking,
safe operation
 Essentials of Lift Trucks: elements of lift
trucks, related rules and regulations,
load centers,
 Load Handling: selection of loads, load
pickup and placement, load stability and
integrity, loading and unloading of
trailers

8. Aerial Boom Lift Truck
 Course Introduction and
Fundamentals
 Potential Hazards Awareness
 Multimedia Presentations
 Manual & Powered Boom Lifts
 Machine Stability
 Safety Operation Procedures
 Steering Controls
 Machines Inspection

9. Fall Protection
 Fall protection is required where
workers are intended to work at
heights.
 This course provides workers with the
required knowledge to safely work at
heights and prevent fall-related
accidents.
 Participants will be instructed on how
to correctly select, inspect, maintain a
wide variety of fall protection
components.

10. Overhead Crane & Rigging
 OSHA Regulations
 Introduction to Forklift Elements
 Equipment overview & operations
 Equipment limitations
 Hazard awareness & prevention
 Code of practice

11. WHMIS Training
 Recognize hazardous materials,
 How to deal with hazardous materials
at the workplace
 Preventive measures to cope with
accidents taking place due to these
materials.

12. Transportation of Dangerous Goods
 This course covers federally and
locally regulated guidelines that
dictate how these goods must be
transported and how to use an
Emergency Response Plan to manage
accidents or safety issues.
 The purpose of the training is to
demonstrate that if the worker can
handle, offers for transport, or
transports dangerous goods, that they
can do their duties in compliance with
the TDG Regulations.