This Brochure covers Calmade Industries product line for the window covering industry. We also manufacture custom equipment per customer specifications.

1. 1
"If you need it We can build it"
Widow Covering Industry
Product Line
1 Elevators
2 Cutting Tables
3 Hobble tables
4 Pinning Tables
5 Traveling Sawing Tables
6 Fabric Welders
7 Custom Design Equipment

2. 2
1 ELEVATORS
Calmade Elevators (Gantry) Systems comes in many models to fit an specific need and budget. These
equipments can lift from Model LD 100 lbs. to 750 lbs per unit i.e. Model SE-2020-5 DC.
Models Specifications:
Model LD (Light Duty) These models are a single column H frame made out of Steel Tube .090
wall. Finish gray powder coat. and comes in two sizes:
Model 120-96 This an "H" frame 120" high by 96" wide
Lifting Bar. Maximum Lifting power is up to
100 lbs. with standard size AC motor.
Model 120-120 This an "H" frame 120" high by 120" wide
Lifting Bar. Maximum Lifting power is up to
250 lbs. with standard size AC motor.
120-96 This picture shows the universal clamping system is
(4) are standard with every elevator
Model MD (Medium Duty) These models are a Double Columns made out of 3"x3" Aluminum
Profiles. Finish clear anodized column H frame and comes in two sizes:
120-96 frame 120" high by 96" wide Lifting Bar.
Maximum lifting power is up to 200 lbs. with
standard size DC motor.
120-120 frame 120" high by 120" wide Lifting Bar.
Maximum lifting power is up to 275 lbs. with
standard size DC motor.

3. 3
1 Elevators
(Cont.)
Model HD (Heavy Duty) These models are a Double Columns made out of 3"x3" Aluminum
Profiles. Finish clear anodized column H frame and comes in two sizes:
Model 120-120 frame 120" high by 120" wide Lifting
Bar. Maximum lifting power is up to
350 lbs. with standard size DC motor.
Model 240-240 frame 240" high by 240" wide Lifting
Bar. Maximum lifting power is up to
500 lbs. with standard size DC motor.
Model SD (Super Duty) These models are a Double Columns made out of 6"x3" Aluminum
Profiles. Finish clear anodized column H frame and comes in THREE main sizes:
Model 240-240 frame 240" high by 240" wide Lifting
Bar. Maximum lifting power is up to
750 lbs. with standard size
AC motor.
Model 240-360 frame 240" high by 360" wide Lifting
Bar. Maximum lifting power is up to
750 lbs. with standard size DC
motor.
Model 240-240 frame 240" high by 240"ea. wide
Lifting Bar. Maximum lifting power
is up to 750 lbs. each unit with
standard size AC motor(s). This model can be joint in tandem up to 5 units. This
unit was design for extra large Theater Curtains, these machines total length is of
over 100 ft. long. Maximum lifting power is 3,750 lb

4. 4
1 Custom Elevators
(Cont.)
Calmade Industries will manufacture any Elevator to fit the need of the customer; in this case the
customer needed a gantry that will serve dual purposes a) to inspect and b) to test different types of
high end curtains and shades.
Model CE: (Custom Elevators) This elevator was custom made for a customer.
Specifications:
1 Frame: Double Sided, DIM.: 18 ft H x 20 ft. long.
2 Dual Independent control for each side in another words
TWO elevators with ONE frame.
3 Dual Light Back ground System with engrave 1" square
4 Dual Independent Controllers.
5 Dual Pneumatic Clamping System
6 Independent Foot control to raise or lower.
7 Independent Limit switch system
2 CUTTING TABLES
Calmade Industries cutting table are all made from Aluminum profiles, with a clear anodized finish.
Manual cutting tables come standard with the following equipment:
STANDARD MODEL: CT-96-130
1 This table is 96" long x 130" wide
2 Fabric roll holder with shaft.
3 Manual Cutting system roller blade for X Axis.
4 Roller Tube in opposite end to roll fabric in
the tube.
5 Four weights to hold down the fabric.
6 Squaring adjustment system.
7 Bottom rack to store fabric rolls.
8 Standard cutting top
OPTIONS: Auto PAID-OUT Syst.- Auto Cutting system -
Auto TAKE-UP Syst.- Pneumatic Clamp Syst.

5. 5
3 Hubble Tables
Standard Model :HB 96-72 This table is used to
manufacture Roman Shades.
Custom Model: per customer specifications
4 Traveling Sawing Machine
Model No.: TSM-192
1 This machine was designed to sew the bottom
hems of large curtain.
2 This automated operation is very user friendly.
3 The machine controller let you synchronized the
speed of the traveling table with the speed of
the sewing machine.
4 Once the sewing operation the machine returns
to its original position.
5 Travel length from 144" to 240"
5 Fabric Welder
Model No.: TPT- 72
1 Manual control machine
2 Pressure Control
3 Timers settings
4 independent Temperature setting for Upper/ Lower
Bars.

6. 6
5 Fabric Welder
(Cont.)
Welder Model: WTPT-DC-130
1 Custom Frames to meet customers Specifications.
2 Welding bar lengths from 72" to 168"
3 Transformers from 4.5 KW to 18 KW
4 Custom controls.
5 Thru welding.
Welder Model: WTPT-DC-130 / 168
1. 1 Dual Independent temperature Control.
2. 2 Adjustable Bar Pressure control.
3. 3 Thru Welding
4. 4 Two Heavy Duty Transformers.
5. 5 10" Touch Screen.
6. 6 PLC with program.
7. 7 Pocket Folding System 36 I/O
8. 8 Front Take Up System.
9. 9 Heavy Duty Frame.
10. 10 Heavy Duty Pneumatic Cylinders
11. 11 Dual Pressure Safety Sensors.
12. 12 200 Program setting.
For more informationpleasevisitour web site at www.CalmadeInd.com orcall us Messagesat (818)-521-0443
ERG Cell (818) 522-7527
Fax (818)230-0434. E-mail:Info@CalmadeInd.com
Please Contact: