2. » Specific grades for all activities: wire drawing,
bar drawing, cold heading, manufacturing
of cutlery and a wide range of parts:
screws, welding rods, spring, profiles...
» For manufacturing various parts: fasteners
(screws and bolts), wire for springs,
profiles, welding rods, knives, etc.
» Continuous development and improvement
of existing grades to meet market
requirements (automotive industry, ultra-
clean grades for medical uses, etc.)
Service adapted to your needs
» Short and reliable delivery time.
» Technical assistance to help you choose
the best grade for your needs.
» Our Resarch and Development Center to help
you with the design of new products.
» An eServices portal to track your orders in real
time and download at anytime all the documents
related to your orders: order acknolegments,
delivery notes, certificates, invoices…
Consistent quality guaranteed by our Approvals
ISO 9001, ISO 14001, ISO TS 16949, Llyods, Tüv, Qualifas, Cofrac
A wide range of martensitic, ferritic, austenitic, duplex
and heat resisting grades…
We have the solution to all your needs
3. Dimension range
From 5 to 32 mm – each 0.5 mm up to
13 mm, then every mm up to 32 mm
12.4 mm, 13.2 mm and from 14 mm
each mm up to 28 mm.
Please ask us for other dimensions
Standard tolerances
5 to 7.5 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.10/+0.20 mm
8 to 13 mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.20/+0.20 mm
14 to 32 mm. . . . . . . . . . . . . . . . . . . . . . . . . . -0.25/+0.25 mm
12.4 to 20 mm. . . . . . . . . . . . . . . . . . . . . . -0.20/+0.30 mm
21 to 28 mm. . . . . . . . . . . . . . . . . . . . . . . . . . -0.30/+0.30 mm
Ovalisation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.5 mm
(3 points measure)
Minimum order quantity
Standard grades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 ton
Special grades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 tons (full cast)
Packaging
1,000 kg coils
Special packaging on request
Other finishes available on request
Coated wire rod, shaved wire rod, etc.
Coil dimensions
Internal diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800/900 mm
External diameter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 200 mm
Height. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 800/1 200 mm
Pay-off direction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . anti-clockwise
Loading
From lateral side or from the back
Label
With bar code for better traceability
annealed
maximum
annealed
heat
treated
quenched over-aged
Ferritic grades • •
Special ferritic grades
(High Cr, Duplex)
•
Ferritic resulphurized -
martensitic + martensitic
resulphurized grades
• • •
Special martensitic grades
AISI 630 EN 4542
• • •
Austenitic + austenitic
resulphurized + heat
resisting grades
•
Metallurgical conditions
Annealed = Solution Annealing for Austenitic grades
Dimensional Range
Maximum depth of any
surface defect
5 to 12 mm 0.1 mm
12 mm 0.8 % of diameter
≤20 mm 0.2 mm
20 mm
1 % of the A/F
measurement
Surface Finish
Technical features
