Global Scenario On Sustainable and Resilient Coconut Industry by Dr. Jelfina...
High efficiency coalescer separator
1. Fluids Services
high efficiency
COALESCER UNIT
Fact Sheet
High Efficiency Coalescer Separator
The high efficiency coalescer separator is an ideal produced-water treating technology
for application on platforms where power is not available. The Coalescer merges small
liquid drops into larger drops by filtering the liquid through several layers of media, each
with progressively larger pores. As drops compete for the open pores, they coalesce and
form larger drops which are more easily separated.
The skid design consists of two pre-filter vessels, two standard coalescer vessels,
two high-efficiency coalescer vessels, and all on-skid piping and controls to operate
automatically and safely with only periodic personnel attention.
SPECIFICATIONS COALESCER
L x W x H (ft) 24’ x 8’ 6” x 8’ 6”
Weight (dry) 22,000 lbs
Weight (flooded) 23,000 lbs
Capacity (Bpd) 5,000
Pressure Rating (PSI) 150 PSIG @ 120˚ F
Instrumentation PSV, LG, LC, LSH, LSL, SDV, LCV, PI, PCV
Features Pre-Filter
Power Requirements None
Asme Code Sec VIII Div. 1 and Asme “U” Stamp
tervita.com
2. Fluids Services
COALESCER UNIT
Canada Operations
500, 140–10 Ave. S.E.
Advantages
Calgary, AB T2G 0R1
No Power Requirements
T: (403) 233-7565
F: (403) 261-5612 Wide Range of Nominal Flow Capabilities
US Operations Achieve Less Than 5 PPM Oil and Grease
363 N. sam Houston
Parkway, Suite 330
PRODUCT PRE-FILTER VESSELS PRE-FILTER ELEMENTS
Houston, TX 77060
T: (832) 399-4500 Quantity Total Of Two (2) On Skid – Eighteen (18) Per Vessel – Total Of Thirty-Six (36)
F: (832) 627-7764 (1 In Service And 1 As Back-Up) On Skid
Description Mawp: 150 Psig @ 120 F Pall Nexis T Cartridge – 40” Length
3” - 150# In/Out Melt-Blown Polypropylene Depth Media
Swing Bolt Closure 1-Micron Filtration At 90% Efficiency
Carbon Steel W/ 3 Coat Paint 10 -Micron Filtration At 99.9% Efficiency
Holds (18) 2.5” X 40” 222 Cartridges Soe Cartridge With External 222
Buna O-Rings
Asme “U” Stamp Prefilter Element Part #: Nxt1 – 40U-M3n
PRODUCT PALL PHASESEP COALESCER HOUSING STANDARD COALESCER ELEMENTS
Quantity Total Of Two (2) On Skid – (1 In Service And 1 As Four (4) Per Vessel – Total Of Eight (8)
Back-Up) On Skid
Description 16” Od X 110” Length (App.) Coalescer Element – 40” Length
Carbon Steel Housing With 30422 Internals Pall Phasesep Coalescer - With Fluoropolymer
Media
Top-Mounted Oil-Collection Sump, Standard Coalescer Element Part #: LCS4h1ah
12’ Od X 50”L (App.)
3” - 150# In/Out
Design Conditions 150 Psig @ 150F
Swing Bolt Closure
Asme Section Viii, Div. 1 And “U” Stamped
Holds Four (4) 40” Length Phasesep Standard
Coalescer Elements