This document provides information about Matti Andersson and DEKRA Material Testing & Inspection. DEKRA is a European market leader in industrial testing and inspection services, reaching over 2 billion euros in sales in 2011. It has expanded internationally since the 1970s and currently employs nearly 28,000 people across multiple business units providing services such as material testing, product testing and certification, and industrial inspections.

1. Matti Andersson, Laajaniityntie 3, FI-01620 Vantaa, Finland | Tel. +358 400 454 888 | matti.andersson@dekra.com
DEKRA Material Testing & Inspection

2. DEKRA - tradition
Today: European
market leader,
2005:
TOP 4 worldwide
Entry into the
1996: industrial testing
Start of the business
Internation-
1970s: alisation
Established 1925 Start of periodical
in Berlin: car testing
Deutscher
Kraftfahrzeugs-
überwachungs
verein
Slide 2 © 2011 DEKRA

3. DEKRA reached the 2-bn.-threshold in 2011
2.007
1.859
1.710
(cons. in Mio. EU))
1.596
1.439
1.311
Sales
1.178
965 978 979
> 100 %
2002 2003 2004 2005 2006 2007 2008 2009 2010 2011

4. DEKRA proofs again to be an attractive employer
+ 3.000
27.900
24.900
21.900
20.100
18.400
Employees
17.000
15.500
11.200 12.000
133 %
2003 2004 2005 2006 2007 2008 2009 2010 2011

5. Aggressive competitive environment – Ranking 2011
Sales 2011 in € MM and Sales Growth in %
3,941
3,359
2,087 2,007
1,700² 1,400
1,260*
951 923* 815** 741* 705* 680*
14.6% 18% inorg.
0.8%(1) (1) + 9% org. 8.0% ~8.0% ~7.0% 4.8% 6.1% 8.5% 10.4% 8.0% 4.9% 6.3%
…
(1) including currency effects
(2) Projection in annual report 2010
*Figures of 2010
** Figures of 2009
Seite 5 Regional Management Committee © 2012 DEKRA

6. Group Structure with a Focus on Stakeholder Value
DEKRA e.V.
DEKRA SE
DEKRA AUTOMOTIVE
DEKRA INDUSTRIAL
DEKRA PERSONNEL
Seite 6 © 2011 DEKRA

7. DEKRA Industrial
DEKRA Industrial
+25% +10%
Machinery and Health Safety
Plant Safety and Environment
531
484
396
Material Testing & Producttesting and
Inspection -certification
2009 2010 2011*
Building and Systems
Facilities Certification
Sales [Mio. EUR] **

8. Examples for succesful integration
2008 2009 2010 2011 2012
Wind Energy Spain
Inspection Czech Republic
Sweden
Finland
Czech Republic
Russia Lithuania
Non-
Destructive- Turkey Germany
Testing Kazakhstan
Germany Germany Azerbaijan
Seite 8 © 2011 DEKRA

9. DEKRA Material Testing & Inspection
Non Destructive Destructive Welding and
Inspection Failure Analysis
Testing Testing Qualification
 Notified Body for Pressure  Radiographic Test, digital  Tensile Test  Light optical microscope  Welder Qualification &
Equipment, Lifts, Machinery
and conventional Certification
and Rail
 Impact Test  Scanning electron
 Approved Body for In  Ultrasonic Test, standard  Welding Procedure
Service Inspection of
and phased array microscope (SEM) Qualification
Pressure Equipment,  Bend Test
Lifts, Hoisting Equipment
and Machinery and Rail
 Surface Crack Test  Materialanalysis  Welding Cabins & Training
 Fire Protection, Explosion  Hardness Test Lab
Protection, Electrical
Inspection  Leak Test  Corrosionanalysis  Consulting
 Surface Roughness Test
 Expediting of manufacturing concerning welding
and prefabrication  Visual Test  Analysis of damage
 Metallography technique in general
 Supervision of welding, incl.
documentation mechanisms
 Mobile Hardness Testing  Material analysis
 Supervision of construction
 Testing of structural  Simulation of technical heat
steelwork  Corrosion testin
 Delivery control / PMI treatment
Seite 9 © 2011 DEKRA

10. DEKRA Material Testing & Inspection – International
DEKRA Industrial in Czech Republic
Phone: +420.466.310354
www.dekra-industrial.cz
DEKRA Industrial in Finland
Phone: +358.9.878020
www.dekra-industrial.fi
DEKRA Industrial in France
Phone: +33.472.900230
www.dekra-industrial.fr
DEKRA Industrial in Germany
Phone: +49.2065.99740
www.dekra-industrial.de
DEKRA Industrial in Lithuania
Phone: +370.386.31608
www.dekra-industrial.lt
DEKRA Industrial in Sweden
Phone: +46.10.455.1000
http://www.dekra-industrial.se
DEKRA Industrial in Turkey
Phone: +90.216 537 07 60
http://www.dekra-industrial.com.tr
10

11. Examples for Special Services
Seite 11 © 2011 DEKRA

12. DEKRA Material Testing & Inspection
Corrosion Monitoring
Digital radiographic and Isotope - based
methods enables us to detect any kind of
corrosion related indications
These methods enable a corrosion
monitoring without the time and cost consuming
disassembling of the insolatio
The Lixi Profiler utilises a Gadolinium 153
isotope, it can also be used for the identifi-
cation of welds or blockages in piping systems
Seite 12 © 2011 DEKRA

13. DEKRA Material Testing & Inspection
Tankfarm Services
 Condition monitoring of flat bottom storage
tanks
 Floor – Scanning corrosion monitoring by
different methods MFL/EC
 Wall thickness measurement for the tank
walls
 Inspection of the tank farms based on water-
and explosion - protection regulations of the
different countries
Seite 13 © 2011 DEKRA

14. DEKRA Material Testing & Inspection
Mobile Metallographic Methods
 Components exposed by high temperature and
high stresses will deteriorate in service due to
creep
 By Mobile Metallography (Replica Technique) the
actual condition can be monitored directly on –
site
 Other applications are microstructures of
weldings and heat treatment procedures
Seite 14 © 2011 DEKRA

15. DEKRA Material Testing & Inspection
Turbine Condition Evaluation
(single and multistage)
Turbines are exposed by high temperature and
high stresses which leads to complex damage
mechanisms
By using various testing procedures like ultrasonic,
dye penetrant, magnetic particle our Team supports
our customers to identify these deteriorations of the
main components like:
 Main steam valves
 Housings
 Fasteners, bearings, sealing surfaces
 Turbinerotors (dics, blades, vanes)
 Blade attachment areas (steeples, keyways)
Seite 15 © 2011 DEKRA

16. DEKRA Material Testing & Inspection
Wall thickness measurement of boiler pipes
FST-GAGE is a testing equipment that can be used
on all electrically conductive specimens, when rapid
and accurate analysis of the wall thickness is
required
 Rapid inspection of large areas
 High accuracy of measurement
 Non-contact measurement, a coupling medium is
not required
 Fast and accurate evaluation
 Clearer and more meaningful report for a
permanent tracking of periodic inspections
Seite 16 © 2011 DEKRA

17. DEKRA Material Testing & Inspection
Guided Wave UT (long range)
 Effective scanning method to analyze damage
or corrosion in long pipe systems or similar
structures
 Especially in the area of insulated pipes an
economic analysis of the critical areas without
completely removing of the insulation is
possible
 100% of the tube circumference is checked
 This test method is more and more requested in
an international environment
Seite 17 © 2011 DEKRA

18. DEKRA Material Testing & Inspection
R8N crawlers
The R8N crawler has a four-wheel-drive and was
developed for the inspection of steel, concrete
and plastic pipes
 The data is transmitted with a kevlar reinforced
fiber and stretches to 1,000 yards. The control is
carried out by a computer or an iPhone / iPad
 The R8N can with a plurality of various probes to
be fitted as follows:
- X-ray tubes
- Visual Systems
- Ultrasonic Systems
- 3D Laserscan
Seite 18 © 2011 DEKRA

19. DEKRA Material Testing & Inspection
Acoustic Eye
 Acoustic Eye is based on Acoustic Pulse
Reflectometry (APR)
 For the internal inspection of tubes id 8 – 104mm
and length up to 20 m of heat exchangers, boilers,
etc made of ferrous and non ferrous metals and
plastics
 Less than 10 seconds per tube
 Detected defects tube size. 8mm bis 63,5mm:
 Holes min diameter 1 mm
 Blockages min 1% of cross section
 Erosionen min 5 % of wall thickness
Seite 19 © 2011 DEKRA

20. DEKRA Industrial
Services For The Nuclear Industry
DEKRA Industrial: strong values
 DEKRA Industrial Oy is an independent organisation
specialising in non-destructive testing, destructive testing,
pressure equipment inspections and inspections for
electrical installations
 Notified Body No 0875 (PED, TPED)
 Accredited according EN 17020, EN 17025
 Founded by Finnish industrial enterprises in year 1974
20

21. DEKRA Material Testing & Inspection
Mechanized / Automated Testings
Ultrasonic, Eddy Current, Visual & Dye Penetrant Tests
Seite 21 © 2011 DEKRA

22. DEKRA Industrial
Services For The Nuclear Industry
Inspections Qualification Development
• BWR • Sweden • Design of manipulators
• PWR
• France • Vessel, Nozzle, BMI
• VVER
• Finland • Piping
• RBMK
• Switzerland • Control systems
• EPR
• USA • NDE development
• Sizing TOFD
• Phased array
• ET
• VT, AVT
• Probes for special applications
22

23. DEKRA Industrial
Services For The Nuclear Industry
Our knowledge areas of compliance with YVL requirements
 Equiment design  Receipt Inspection
 Materials requirement  Erection
 Fabrication at shop  Installation of components
 Weld qualification  On-site weld testing
 Weld testing at shop  On-site preservice inspection
 Other Test and Inspection at shop  Start-up comissioning
 Administrative guidance
(STUK monitoring, ANI, etc.)
 Pre-Service-Inspection at shop
23

24. DEKRA Industrial
Services For The Nuclear Industry
References for OL 3
 Main Supplier In Olkiluoto 3 Project
 NDT work for Areva Reactor Island
 NDT and DT for suppliers of Areva
- Babcock Noell GmbH
- Babcock Hohdruck-Rohrleitungbau GmbH
- Kraftanlagen Arge
 NDT work for Siemens Turbine Island
 Main contractor of NDT/DT for Siemens
subsuppliers
- Heitkamp
- BHR GmbH
- Kraftanlagen Arge
- VAM GmbH & CO KG
- Ferro-Montagetechnik GmbH
- Balcke Dürr
24

25. DEKRA Industrial
Services For The Nuclear Industry
References for NPPs
 Olkiluoto 1 & 2 BWR
 Loviisa 1 & 2 VVER
 Kola 1, 2, 3 & 4 VVER
 Leningrad 1, 2, 3 & 4 RBMK
 Ingalina 1&2 RBMK
 Forsmark 1, 2 & 3 BWR
 Oskarshamn 1, 2 & 3 BWR
 Ringhals 1, 2, 3, & 4 BWR, PWR
 Barsebäck 1 & 2 BWR
 Grafenrheinfeld PWR
 Leibstadt BWR
 Isar 1 BWR
 Garigliano BWR
 Busher 1&2 PWR
25

26. DEKRA Industrial
Services For The Nuclear Industry
Services during operation
 Inspection personnel have knowledge
in a wide range of reactor types
- BWR, PWR, VVER, RBMK,
(EPR)
 Planning and execution of inspections
- Procedures
- Expert services for qualification
bodies
 In-service mechanized and manual
Testings for the NPPs
- RPV tank, RPV Nozzles,
- Pipelines
- Turbines
26

27. DEKRA Industrial
Services For The Nuclear Industry
Services during operation
• Pressure Equipment inspections
- Pressure vessels
- Piping systems
- Redesign examinations
• Training services for Testing and
Inspection personnel
27

28. DEKRA Industrial
The DEKRA advantage
 We are one of the largest organizations for testing and inspections in Europe!
 Worldwide operations, able to understand differences in culture and language. Our
staff communicate in English.
 Independent supplier of all types of inspection
 QA and QC resources for new plants/upgrade
 Experienced engineers, projects in PWR, BWR, EPR, VVER and RBMK
 Strong organization and project management.
 Large pool of personnel in France, Germany, Sweden, Finland, Turkey, Czech
Republic and Lithuania
 Several labs for destructive testing
 Existing solutions for mechanized inspection in Nuclear power plants. State-of-the-
art manipulators developed for PWR and VVER
28

29. References in the field of Energy, Chemistry, Oil and Gas
Seite 29 © 2011 DEKRA

30. www.dekra.fi
30