1. Mobile Stroke Unit
Acting FAST
when tools, time and safety
matter most
Commitment
Committed to providing the best
solution for each job, Frazer, Ltd.
designed one of the first Mobile
Stroke Units in the country. Leaping
ahead of the competition, Frazer has
engineered safety to the extreme.
With multiple patents pending, Frazer
tested the unit for stability in a
collision. The CT scanner mounting
and retention system was subjected
to 150% of the SAE J3043 testing
requirement and still resulted in NO
DAMAGE. Engineered for life, the
Mobile Stroke Unit offers critical time,
work space and safety.
2. www.FrazerBilt.com
email: sales@frazerbilt.com
Toll Free: (888) 372-9371
Time
It is estimated that a stroke occurs every 40 seconds. With the
Mobile Stroke Unit, paramedics have the equipment and space
to perform CT Scans on site. The unit is long enough the tech
can stay in the unit while performing the scan adding
convenience for the tech and comfort for the patient. Information
in hand, the hospital knows the facts; whether it is a stroke and
what type of stroke.
Work Space
With more than 30 years of experience building emergency
vehicles, Frazer knows the importance of space and storage.
The Mobile Stroke Unit hosts two workstations; a flat surface by
the rear door and a fold down table by the side door. Along with
configurable cabinets, additional storage can be found in the
CPR seat and in the squad bench.
Safety
Many safety measures have been engineered and implemented
to promote successful operations on scene, in transit and during
the unexpected collision. With patents pending, Frazer has
developed a one of a kind ratchet system to stabilize the cot
while the patient is maneuvered to the CT Scan. More patents
pending, the CT scanner is secured during transit with multiple
levels of security designed for the unexpected collision. The first
being the bolting system keeping the scanner in place, next the
steel enclosure in the unexpected event the unit comes loose,
and then the cargo netting to catch any falling debris.
HOSPITAL GRADE FLOORING
RATCHET SYSTEM
SAFETY CHOCKS
INTEGRATED CT SCANNER
REFRIGERATOR
STORAGE
STORAGE
CONFIGURABLE CABINETS
TELEMEDICINE CAPABILTIES
REAR I/O COMPARTMENT
DIFIBRILATOR MOUNT
OXYGEN OUTLETS
CT Scanner
● CereTom by Samsung Neurologica
● Dedicated electrical circuit
● Patent Pending on ‘scanner anchoring
system”
● Custom designed antifriction nylon
inserts with quick release pins
● Laser leveled floor
● Crash Tested Steel Enclosure with
cargo netting
● Up to 2 hours of internal battery power
● Automatically charges while the truck
or generator are in use
For a full list of features, contact the Sales Department.
Exterior
● Remountable
● 14 ft module: 168” x 96”
● 57.0kW Onan commercial gasoline
generator for full, independent power to
the patient module with 2011 EPA
certification for small engine emissions
● 120VAC to 12VDC regulated,
continuous duty, power supply in
concert with Onan generator, provides
module 12VDC power without drawing
from the chassis alternator/battery
system
●100% LED Lighting
Interior
● 14 ft. module: 71.5” headroom
● 100% LED lighting
● Optional 6 point, SAE J3026
harnesses
● Quad 120VAC electrical outlet at
action wall
● 120VAC air conditioner/heater with
digital thermostat, and dual air outlets,
meets 2010 EPA requirements
● 2 way intercom w/camera to
communicate between the patient
compartment and the cab
● designed to support other imaging
systems with modifications to adapt to
specific equipment footprint.
5. Chassis Features
● Designed to fit a variety of 14’ models and manufacturers
● Liquid spring suspension system
● Powder coated, six position aluminum center console
with integrated switch panel and adjustable radio
mounting panels
● 200 watt siren with two 100 watt speakers
● Heat shielding to protect module from diesel exhaust
regeneration
● Four 4”x3” intersection & grille LEDs; choice of colors
● Optional 4-wheel drive
Standard Exterior
● Remountable
● Ultra strong base frame with 3” x .188” channel and
tubing. welded. dual structural aluminum tubes on all
sides and top for maximum strength
● 2160 matic electric step at side entry door
● 21” deep exterior storage compartment
● External compartments for electrical, air conditioner, and
generator
● Four pre-run RG58U coax cables
● Tinted, double-pane, insulated, sliding windows
● Driver’ side rear storage large enough for SCBAs and
bunker gear
● 30+ Whelen “M” Series, 6” x 4” LEDS with chrome
bezels
Interior Features
● 14 ft. module: 71.5” headroom
● Vacuum formed cushions attached with heavy duty
magnets
● Optional 6 point, SAE J3026 harnesses
● 100% finyl Lonseal flooring; medical grade
● Quad 120VAC electrical outlet at action wall
● 54’ x 20” action area countertop with hinged access
panel to back of oxygen outlets and switches
● 120VAC air conditioner/heater with digital thermostat,
and dual air outlets, meets 2010 EPA requirements
● Ten LED interior lights
Technology
● Telemedicine capabilities
● 2-way intercom with camera to communicate between
the patient compartment and the cab
● Imaging Equipment, configurable space and security
features
● Optional back-up camera
CT Scanner
● CereTom by Samsung Neurologica
● Dedicated electrical circuit; self-powered up to 2 hours
● Patent Pending on ‘scanner anchoring system”
● Laser leveled floor
● Steel frame encloser with cargo netting
Generator & Electrical Features
● 57.0kW Onan commercial gasoline generator for full,
independent power to the patient module with 2011 EPA
certification for small engine emissions
● 120VAC to 12VDC regulated, continuous duty, power
supply in concert with Onan generator, provides module
12VDC power without drawing from the chassis
alternator/battery system
www.FrazerBilt.com
email: sales@frazerbilt.com
Toll Free: (888) 372-9371 For a full list of features,
contact the Sales Department.
HOSPITAL GRADE FLOORING
RATCHET SYSTEM
SAFETY CHOCKS
INTEGRATED CT SCANNER
REFRIGERATOR
STORAGE
STORAGE
CONFIGURABLE CABINETS
TELEMEDICINE CAPABILTIES
REAR I/O COMPARTMENT
DIFIBRILATOR MOUNT
OXYGEN OUTLETS
Crash Test Certified
In 2016, the CT scanner mounting and retention system
successfully passed the SAE J3043 (Ambulance Equipment
Mount Device or Systems) certification test. The test simulated
both a frontal and side impact and resulted in no damage to the
module or mounting and retention system. To further prove its
strength, the CT scanner mounting and retention system was
subjected to 150% of the SAE J3043 testing requirement and
still resulted in no damage. All testing was conducted by an
ANAB accredited environmental testing facility.
8. www.FrazerBilt.com
email: sales@frazerbilt.com
Toll Free: (888) 372-9371
Chassis Features
● A variety of 14’ models and manufacturers
● Liquid spring suspension system
● Optional 4-wheel drive
Standard Exterior
● Remountable
● Ultra strong base frame with 3” x .188” channel
and tubing. welded. dual structural aluminum tubes
● Four pre-run RG58U coax cables
● Tinted, double-pane, insulated, sliding windows
Interior Features
● 14 ft. module: 71.5” headroom
● Optional 6 point, SAE J3026 harnesses
● Quad 120VAC electrical outlet at action wall
● 120VAC air conditioner/heater with digital thermostat, and dual air
outlets, meets 2010 EPA requirements
Technology
● Telemedicine capabilities
● 2-way intercom with camera to communicate between the patient
compartment and the cab
● Optional back-up camera
CT Scanner
● Dedicated electrical circuit; self-powered up to 2 hours
● Patent Pending on ‘scanner anchoring system”
● Laser leveled floor
Generator & Electrical Features
● 57.0kW Onan commercial gasoline generator for full, independent power
to the patient module with 2011 EPA certification for small engine
emissions
● 120VAC to 12VDC regulated, continuous duty, power supply in concert
with Onan generator, provides module 12VDC power without drawing
from the chassis alternator/battery system
For a full list of features, contact the Sales Department.
In 2016, the CT scanner mounting and retention system successfully
passed the SAE J3043 (Ambulance Equipment Mount Device or
Systems) certification test. The test simulated both a frontal and side
impact and resulted in no damage to the module or mounting and retention system. To
further prove its strength, the CT scanner mounting and retention system was subjected to
150% of the SAE J3043 testing requirement and still resulted in no damage. All testing was
conducted by an ANAB accredited environmental testing facility.
Crash Test Certified
