5. INTRODUCTION
To prevent accidents, it is not in our hand always but, it is
possible to savevictims. Under suchcircumstance avehicle
collision detection system is helpful.
”SAVE ME” includes a hardware system to hold sensor,
an android basedapplication that detect nearbyactive
sensorandalso a dedicated server which receive
messagesfrom android application.
The android application sends an alert message to the
nearby control station about the accident.
Hence the accident spot can be located using GPS in
mobile phone of the victim.
6. PRODUCT SCOPE
In present scenario, we seemany case where people die on road due
to unnoticed road accidents.
This becomes a usual case at nights.
For android users who install ”SAVE ME” application it will be
helpful.
Any android user can use ”SAVE ME”. The hardware made use is
also reliable.
7. EXISTING SYSTEM
It is a common scenario that people die unnoticed
during accidents, especially during night time.
Communication is possible only through telephone
calls.
There is no such system to inform the rescue forces
when the driver is seriously injured.
8. PROPOSED SYSTEM
”SAVE ME” system include a Sensing module an
Android application and a Server side .
The Sensing module include a collision
sensor attached to the Raspberry pi that
detects any collision.
Android application include mechanism to detect
any nearby active sensors. It sends all updated
messages to the server.
9. Finally the Server side receives accident information from the
android application and sends an alert message to the nearby
control station of the accident location.
When alert message is received in the control station, they can
fetch accident location by using GPS in users mobile phone.
Then further rescue operations can be carried out.
On the other hand SAVE ME also send an information message to
an emergencynumberof the user,which he/she specifies during
application installation.
10. ADVANTAGES OF PROPOSED SYSTEM
Accident alerts are given to the nearest control
station on the very first moment of collision.
A message will be send to a selected contact to
inform about the accident.
The alert message will include the GPS location
,so that the rescue action become very fast.
A map may be displayed for the easy
identification of the accident location.
16. IMPLEMENTATION
Python: Python iswidely usedat high-level,generalpurposeandas
dynamic programmic language.
MySQL: Database informations are created and stored using this.
Jsp: Server Module is built using Jsp.
18. CONCLUSION
SAVE ME: An Automatic Accident Detection And Alert
System For Automobiles is used for providing help to the
accident victims.
The proposed system is developed to rescue accident
victims asfast aspossible.
SAVEME consist of Raspberrypi, arduino, android
application, alsoa webpage.
Application sends the accident message to the the
nearest control station aswell asto the emergency
number provided by the application user.
SAVE ME is very reliable and cost of installation is very
cheap.