Short horror movie contingency plan.

1. Shot Start Finish
Gather cast and crew. 8:20am 8:30am
Set up the equipment. 8:30am 8:45am
Rehearsals. 8:45am 9:00am
LS – Bill walking along on the
frame.
9:00am 9:10am
CS – Bill answers the phone. The
Camera zooms in.
9:10am 9:19am
LS – Bill starts walking on and
gets interrupted by a phone call
and the camera zooms in of his
face again.
9:19am 9:26am
LS – Bill starts running. 9:26am 9:33am
MS – The killer is chasing after
Bill. The camera is tilted down so
you can’t see the killer’s face
9:33am 9:39am
LS – Bill goes towards an old
building placement.
9:39am 9:48am
MS – The killer is focused on Bill. 9:48am 9:54am
MS – The killer tilts his head. 9:54am 10:00am
LS – Bill tries to get away from
the killer and falls down.
10:00am 10:15am
LS – The killer comes off scene. 10:15am 10:25am
MS – The killer falls down and
does actions. It goes closer.
10:25am 10:35am
LS – In the shot is trees shown in
the distance.
10:35am 10:45am
20/04/19
Location – Wednesfield
Production was pushed back due to rain and snow.

2. LS – Shows the old building
placement.
10:45am 10:55am
LS – Shows the bushes around
the area.
10:55am 11:10am
CS – This is a shot of branches. 11:10am 11:15am
CS – The shot is focused on the
killer’s eye and then the shot cuts
to black.
11:15am 11:25am
Wrap the production with the
cast.
11:25am 11:35am
Derig the equipment. 11:35am 11:55am
Wrap the production with the
crew.
11:55am 12:10am