1. Unit 905, 9/F, Nanyang Plaza, 57 Hung To Road, Kwun Tong, KLN. HK.
TEL: (852) 3595 0288 / FAX: (852) 3544 2741 website:www.passiontech.net
For Support: support@passiontech.net
FT_Prog 安卓 GPIO 設置教程
1. 把模塊插上電腦
2. 下蛓驅動(http://www.passiontech.net/uploads/soft/20130910/1378789193.rar), 并安裝好
3. 下蛓 FT_Prog (http://www.passiontech.net/uploads/soft/20130918/1379493529.zip)
4. 打開 FT_Prog
5. 點 Devices, Scan and Parse

2. Unit 905, 9/F, Nanyang Plaza, 57 Hung To Road, Kwun Tong, KLN. HK.
TEL: (852) 3595 0288 / FAX: (852) 3544 2741 website:www.passiontech.net
For Support: support@passiontech.net
6. 然後點 Hardware Specific, 看到 CBUS Signals 點擊, 可將有需要的 CBUS PIN 變為 GPIO
下圖將 C0 , C1 變為了 GPIO

3. Unit 905, 9/F, Nanyang Plaza, 57 Hung To Road, Kwun Tong, KLN. HK.
TEL: (852) 3595 0288 / FAX: (852) 3544 2741 website:www.passiontech.net
For Support: support@passiontech.net
7. 按 , 然後按 Programme, 完成 C0, C1 已變成 GPIO