Successfully reported this slideshow.
We use your LinkedIn profile and activity data to personalize ads and to show you more relevant ads. You can change your ad preferences anytime.

How to make good Xeon Phi

2,558 views

Published on

How to make good Xeon Phi
- Install and Native root login -

30 May, 2013
SAKURA Internet Research Center
Senior Researcher / Naoto MATSUMOTO

Published in: Technology
  • Be the first to comment

How to make good Xeon Phi

  1. 1. 30 May, 2013SAKURA Internet Research CenterSenior Researcher / Naoto MATSUMOTO
  2. 2. Installing ToDo1) Xeon Phi MPSS utilities install# uname -aLinux 2.6.32-358.6.2.el6.x86_64 #1 SMP Thu May 16 11:21:38 CDT 2013 x86_64 x86_64 x86_64 GNU/Linux# tar xvf ./mpss_gold_update_3-2.1.6720-13-rhel-6.4.tar ; cd mpss_gold_update_3# yum install --nogpgcheck --noplugins --disablerepo=* *.rpm# micctrl --initdefaults# micctrl -r -w# /opt/intel/mic/bin/micflash -Update /opt/intel/mic/flash/EXT_HP2_SMC_Bootloader_1_8_4326.css_ab -device all# sync; sync; sync; reboot# micctrl -r -w# /opt/intel/mic/bin/micflash -Update /opt/intel/mic/flash/ -device all# chkconfig mpss on# sync; sync; sync; reboot# /opt/intel/mic/bin/micinfo# /opt/intel/mic/bin/miccheck
  3. 3. Native root login Config2) Xeon Phi Native root login configuration# micctrl --passwd=root --pass=XXXXXXXXXXX mic0# service mpss restart# micctrl --config:MIC IP: A.A.A.A:# ssh root@A.A.A.A# uname -aLinux SL64-mic0 2.6.38.8-g5f2543d #2 SMP Tue Apr 30 14:05:06 PDT 2013 k1om k1om k1om GNU/Linux# grep processor /proc/cpuinfo:processor : 235processor : 236processor : 237processor : 238processor : 239
  4. 4. Xeon Phi status check3) Xeon Phi miccheck# /opt/intel/mic/bin/miccheckmiccheck 2.1.6720-13, created 14:49:30 Apr 30 2013Copyright 2011-2013 Intel Corporation All rights reservedTest 1 Ensure installation matches manifest : OKTest 2 Ensure host driver is loaded : OKTest 3 Ensure driver matches manifest : OKTest 4 Detect all listed devices : OKMIC 0 Test 1 Find the device : OKMIC 0 Test 2 Check the POST code via PCI : OKMIC 0 Test 3 Connect to the device : OKMIC 0 Test 4 Check for normal mode : OKMIC 0 Test 5 Check the POST code via SCIF : OKMIC 0 Test 6 Send data to the device : OKMIC 0 Test 7 Compare the PCI configuration : OKMIC 0 Test 8 Ensure Flash version matches manifest : OKStatus: OK.
  5. 5. Thanks for your interest.SAKURA Internet Research Center.

×