Power quality

1. POWER QUALITY IMPROVEMENT IN HYBRID
POWER SYSTEM
USING D-STATCOM
PROJECT GUIDE:
Mr. G. Kiran
Asst. Prof.
SUBMITTED BY:
A. Harika 20285A0284
B. Venkatesh 20285A0262
K. Vinay 20285A0269
V. Raju 20285A0291
G. Prashanth 20285A0287

2. INTRODUCTION
• Hybrid renewable energy system can be defined as the power system in which two
or more power generation sources are required to supply the electrical load in the
system.
• Wind-PV hybrid generation system along with grid integration can be a potential
choice for power production since it utilizes the strengths of both solar and wind
energy system
• To meet the increase in load demand this combination will give the best solution
in both standalone as well as grid connected mode.
• The grid extracts the sustainable energy from the hybrid wind – PV system during
the sunny and cloudy days and deliver it to the load connected.
• Reduction in transmission line losses, supply in remote areas and over all a
reliable power system are the following major advantages related to this system

3. SIMULINK MODEL OF WIND TURBINE GENERATOR

4. D- STATCOM MODELLING

5. Reference
• Gayatri et al, "A review of reactive power compensation techniques in micro-grids", Renewable
and Sustainable Energy Reviews, 2018
• Xue Y, Deng J, Ma S., "Power flow control of a distributedgeneration unit in micro grid",IEEE 6th
international conference on power electronics and motion control. IPEMC’09. IEEE; 2009, pp.
2122-5.
• Liu W, Liu M.,"The distributed control of autonomous micro grid based on voltage." In
Proceedings of the 3rd international conference on power electronics systems and applications,
PESA 2009; IEEE, pp. 1-6

6. THANK YOU