This is the project of IGroup

1. IGroup
Materials
selection

2. Product analysis

3.  - What is the function of your product?
It's a multifunction shoes rack that can Extend more than
one look.
- How do the components interact
By use a hinge to contact each main part together, so it
can be rotate 180 degree and use a nail to fix shelves and
branch.
- How is it made?
First when we get a material we calibrate and cut a veneer
for suit size, second we bore a veneer to buid a branch and a
shelf with a jigsaw, then we use hinge and nail to fix each part
together, and finally embellish it.
- What should it cost?
It's coat should be about 200-400
- What should it look like ?
It's a modern shoes rack, when we finished it,it should look
like a stump on the wall.

4. Material selection

5. What materials can you use ?
First, If you’ve ask me for make a some
luxury furniture such as a classic chair , a nice
shelf with a limited budget. I’ll said wood.
Because it can answer anything you want.

6. Mechanical , Thermal and
electrical Properties

7. Young’s Modulus – Density For wood

8. Strength – Density For Wood

9. Strength – Max. Service Temp For Wood

10. Resistivity – Cost For Wood

11. Recycle Fraction – Cost For Wood

12. How much do they cost ?
Veneer for 50 per 1 piece
Nail for 20 per 1 box
Hinge for 50 per 1 piece

13. Can they be recycled
?
Yes, they’re woods they can be recycle exactly.

14. Manufacturing
process selection

15. - What processes are suitable to your
chosen materials?
The process used to manufacture the
material is crawlers, drilling and planing the
wood surface.
- What is the process technical
performance?
Techniques applied to the material so
that the material is resistant to water.
- What is the manufacturing cost?
Production cost is 200-300 .