Objects and classes in Visual Basic

1. Objects and Classes

2. An object is a combination of code and data
that can be treated as a unit.
• An object can be a piece of an application, like a
control or a Form.
• The entire application can also be an object.
A class is usually described as the template
from which an instance, i.e. an object can be created.
• Each object in Visual Basic is defined by a class.
• For example, an individual Form is an instance of
the Forms class.

3. Encapsulation
• A key rule in encapsulation is that programs
should not access the instance variables in the
object directly.
• Interaction of programs with this data is possible
only through the object’s properties and methods.
• Visual Basic fully supports encapsulation.
Inheritance
Inheritance, the ability to make classes descend
from other classes is not supported by Visual Basic.

4. Polymorphism
• A class that inherited its data structures and
routines from another class is called
polymorphism.
• Polymorphism is helpful when creating new
objects from old ones.
• When a new object is defined that is related
to an existing object, it is not necessary to
rebuild any of the existing code in order to take
the new object into account.

5. Object Variables
Object type variables are used for working with
objects.
For example, when using the Me keyword to refer to the
current object, we are using an object variable.
The scope of an object variable is given with Dim, Private,
Public, Static, etc. Thus we can have local, form-level, or public
(global) object variables. Some examples are discussed here.
Dim frmvar As Form
Private optnew As Optionbutton
The Set command is mainly used to simplify lengthy
control references.
For example, we assign Set Fun= frmhelp.texthelp, it
can be written as Fun.forecolor instead of
frmhelp.texthelp.forecolor

6. The New keyword is used only when we want Visual
Basic to create a new instance of the original object.
Dim frmform As New Form1
Example:
Dim frmAform as New Form1
Dim frmBform as New Form1
frmAform.Show
frmBform.Show
frmAForm.Move Left – 199, Top + 100
frmBForm.Move Left – 399, Top + 200
The above example shows two copies of the original
Form, Form 1. The locations are determined by the
value of Left and Top properties of the original Form.

7. Working with Objects
Visual Basic supports properties, methods
and events.
• In Visual Basic, the setting or attributes of an
object are referred to as properties
• The various procedures that can operate on the
object are called its methods.
• Events are triggered when some aspect of the
object is changed.

8. Controlling Objects with their Properties
The individual properties of the objects can vary.
Some properties can be set at design time. We can use
the Properties window to set the value of these properties
without writing any code.
Some properties are not available at design time;
these properties are manipulated at run time using the
code.
• Properties that we can set and those that we manipulate
at run time are called read-write properties
e.g. text properties of a text box.
• Properties that we can only read at run time are called
read-only properties
e.g. name property of a control.

9. Setting properties values:
The value of a property should be set when it is required
to change the appearance or behaviour of the object value
of a property.
For Eg: The Text property of a text box can be
changed in order to change the contents of the text box.
The following syntax is used to set the value of a property.
object.property = expression
Getting properties values:
We get the value of a property when we want to find the
state of an object before our code performs additional
actions(such as assigning the value to another object)
For Eg: To get the value of a property, we use the
following syntax,
variable=object.property

10. Performing actions with methods:
Methods can affect the value of properties. In Visual Basic, list
boxes have a List property, which can be changed using the Clear and
AddItem methods.
Using methods in code:
When we use a method in code, the manner in which
we write the statement depends on the number of
arguments the method requires and whether the method
returns a value. When a method does not take arguments,
we write the code using the following syntax :
object.method
In this example, the Refresh method repaints the
picture box
Picture1.Refresh 'Forces a repaint of the control.
Some methods, such as Refresh method, do not have
arguments and do not return values.

11. If the method takes more than one argument, we
separate the argument with a comma.
For example, the Circle method uses arguments specifying
the location, radius and color of a circle on a form. To Draw a
blue circle with a 1200-twip radius. We use the following syntax
Form1.Circle(1600, 1800),1200,vbBlue
If we consider the return value of a method, we must
enclose the arguments in parenthesis.
For example, the GetData method returns a picture from
the Clipboard. We use the following syntax
Picture= Clipboard.GetDta(vbCFBitmap)
If there is no return value, the arguments appear without
parentheses.
For example, the AddItem method does not return a value.
List1.AddItem "yourname" 'Adds the text
'yourname' to a list

12. Specific and Generic Object types
A specific Form variable can refer to only one Form in the
application (though it can refer to one of the many
instances of that Form).
Similarly, a specific control variable can refer to only
one particular type of control in our application, such as
TextBox and ListBox.
A Generic object variable can refer to one of many
specific types of objects.
A generic Form variable, for example can refer to
any Form in an application; a generic control variable can
refer to any control on any form in an application.
Generic object variables are useful when we do
not know the specific type of object a variable will refer to
at run time. It is ideal to use a generic Form variable when
the code is to operate on any Form in the application.

13. Example for specific object type
Place a TextBox on a Form and Add the following code
Private Sub Form_Click()
Dim anyText As TextBox
Set anyText=Text1
anyText.Text=“Hello”
End Sub
Now the Text property of the text box will be changed to
Hello

14. Example for generic object type
Place Frame, Label and CommandButton controls on a
Form in any order and Add the following code.
private Sub Form_Click()
Dim anyControl As Control
Set anyControl=Form1.Controls(3).
anyControl.Caption=“Hai! Good Morning”
End Sub
Now the caption of the control we placed third in sequence on
the Form will change to “Hai! Good Morning”

15. Forms as Objects
• Forms are used to make up the interface of an
application.
• They are also objects that can be called by
other modules in the application.
• They are closely related to class modules.
• Major difference between the two is that Forms
can be visible objects, whereas class modules
have no visible interface.

16. Constructors and Destructors
When we use the New operator to create an object,
Visual Basic automatically allocates the space it needs for
our object’s data members.
We can write any other initialization code in the
constructor if we need to.
Assigning default properties and asking the user for
additional data are the operations of constructor
The role of destructors is to free the space allocated for
the constructor. VB automatically de-allocates the space
once the object is destroyed.
An object is destroyed when the last reference to
that object goes out of scope.

17. Collections
 When related objects are grouped in Visual Basic, a
collection is created.
 They are sometimes created automatically when Forms
or controls are added to an application.
Eg: When the Form is loaded, it is automatically added
to the Forms collection.
 A custom control can also have a collection of elements.
Eg: A TreeView control is a custom control having Node
objects, the node objects in a TreeView control form a
collection.
 If controls are added to an application either in design
time or runtime in a control array, they form a control
collection.

18. Collection Object
A collection object is an ordered set of items that can be
considered as a unit.
The items in the Collection can be of any data type,
hence by default the type of the item is Variant.
The properties and methods of Collection objects are
given in table:
METHOD DESCRIPTION
Add Add items to the collection
Remove Remove items from the collection
Count Returns the number of items present in
the collection
Item Returns an item referenced by index
property

19. For….Each Statement
The implementation of ‘For Each….Next’ statement is a
way of enumerating a collection. This object uses an
object called an enumerator. An enumerator keeps track of
the place where we are present in the collection and
returns the next item when it is needed.
Private Sub Form_Load
Dim NewControl As Variant
For Each NewControl In controls
If TypeOf NewControl Is CommandButton then
NewControl.Enabled=True
EndIf
Next
EndSub

20. Controls Collection
• Controls collection is an array that contains all the
controls on a form in Visual Basic.
• The Count property of the Controls collection
returns the number of controls on the Form.
• The salient feature of Controls collection is to
perform an action on a group of controls.

21. Classes and Class Modules
Classes are built by adding custom properties to a
Form and then used as templates for new objects.
Class module object contains the code for the custom
properties(via property procedure) and methods that
object define.
Creating a New Class Module:
A new class module is created at design time by
choosing Project Add Class Module.
Each class module can respond to only two events:
Initialize and Terminate. They are triggered when an
instance of class created or terminated.

22. Steps for Creating a Class Module
 A new standared.EXE project is opened.
 A class module is added to the new project by selecting
Add Class Module from the Project Menu.
 Four CommandButton controls are drawn on the Form.
 Table lists the property values we need to set for the
objects in this example,
Object Properties Settings
Class module Name Thing
Command1 Caption Show the Thing
Command2 Caption Reverse the Thing’s Name
Command3 Caption Create New Thing
Command4 Caption Temporary Thing

23. Coding included in the Code Window of the Class
Module
Option Explicit
Public Name As String
Private mdtmCreated As Date
 The mdtmCreated - used to store the value of read-only
Created property.
 The created property returns the date and time a Thing
object was created.
 To implement Created property, add Property Get to the
declarations section of the class module
Property Get Created() As Date
Created=mdtmCreated
End Property

24.  The Thing object has one method, ReverseName,
which simply reverses the order of the letters in the
Name property.
Public Sub ReverseName()
Dim intCt As Integer
Dim strNew As String
For intCt=1 To Len(strNew)
strNew=Mid$ (strNew, intCt, 1) & strNew
Next
Name=strNew
End Sub

25.  Class modules have two events; Initialize and Terminate.
 In the Object drop down of the class module, select Class.
 The procedure drop down will display the events
 Place the following code in event procedures,
Private Sub Class_Initialize()
mdtmCreated = Now ‘ Display object properties.
MsgBox “Name: “ & Name & “Created, ,”Thing
Initialize”
End Sub
Private Sub Class_Terminate() ‘ Display object
properties
MsgBox “Name: “ & Name & VbCrLf & “Created, ,
“Thing Terminate”
End Sub

26. • The Initialize event procedure contains code that needs to
be executed at the moment the object is created, such as
providing the time stamp for the Created property.
• The Terminate event contains any code that is needed to
execute in order to clean up after the object when it is
being destroyed.
Using the Thing Object:
 The following syntax is added to the declarations section
of the Form
Option Explicit
Private mth As Thing
The variable mth - hold a reference to a Thing object, which
will be created in the Form’s Load event.

27.  The code in the Form_Load event procedure, and in the
Click event procedures for the four buttons is given below.
Private Sub Form_Load()
Set mth = New Thing
mth.Name = InputBox(“Enter a name for the
Thing”)
End Sub
Private Sub Command1_Click()
MsgBox “Name:” & mth.Name & vbCrlf &
“Created:” & mth.Created, , “Form Thing”
End Sub
 vbCrlf – used to display the created date and time in next
line.

28. Private Sub Command2_Click()
mth.ReverseName
Command1.Value = True
End Sub
Private Sub Command3_Click()
Set mth = New Thing
mth.Name = InputBox(“ Enter a name for the new
Thing”)
End Sub
Private Sub Command4_Click()
Dim thTemp As New Thing
thTemp.Name = InputBox(Enter a name for the
Temporary Thing”)
End Sub

29. Running the Project:
Press the key F5 to run the project.
 In the code of the Form_Load event procedure, the
New operator is used to create a Thing object.
 A reference to this Thing is assigned to the variable mth.
 An InputBox will be displayed asking for a name for the
Thin.
 A name is typed and Enter Key is pressed.
 This name is accepted as the return value and is
assigned to the Name property of the Thing object.

30. Show the Form Thing:
We can verify if the Name property has been
assigned by pressing the first button, “Show the Thing,”
which displays a message box with all the properties of
the Thing object.
Reverse the Thing’s Name
Press the second button, Reverse the Thing’s Name .
This button calls the ReverseName method to turn the
Thing’s object’s name around and then clicks the first
button to display the updated property values.

31. Create New Thing :
• Click the Create New Thing button to destroy the
existing Thing object and create a new one.
• The new operator causes a new Thing to be created,
hence we would see the MsgBox displayed by the new
Thing’s Initialize event.
• When we click OK, a reference to the new Thing is
placed in the form-level variable mth.
• This wipes out the reference to the old Thing. As there
are no more references to it, it is destroyed and this is
seen in its Terminate event message box.
• When the Ok button is clicked, the InputBox statement
requests a name for the new Thing.
• To destroy the old Thing before creating new one, add
Set mth = Nothing at the beginning of the event
procedure.

32. Temporary Thing :
 When the variable thTemp was declared As New, a Thing
object will be created the moment one of its properties or
methods is invoked.
 This will happen when the return value of the InputBox is
assigned to the Name property. Type a name and click OK on
the InputBox.
 Now the Thing Initialize message box indicates that the Name
property is still blank.
 When we click OK to dismiss the message box, the value from
the InputBox statement is finally assigned to the Name
property.
 With this, the Click event procedure ends, and the variable
thTemp goes out of scope.
 The object reference for the temporary Thing is released, and
we would view Thing Terminate message box.

33. Closing the program:
 The program is closed by clicking the Close button.
 When the program closes , Form1 is destroyed.
 The variable mth goes out of scope, there are no
remaining references to the Thing, so it’s destroyed
and its Terminate event message box is displayed.
 Ending the program with End button, or with an End
statement in our code, halts the program immediately,
without executing the Terminate events of any objects.