Your SlideShare is downloading. ×
1. What is it?
This is a learning module for a specific Learning Outcome as stipulated in the
Curriculum Specifications th...
Learning Module: Computer Networks
www.ppk.kpm.my < 1 >
TOPIC: 3.4 SETTING NETWORK FACILITIES
DURATION: 12 periods
REFEREN...
Learning Module: Computer Networks
www.ppk.kpm.my < 2 >
THINGS YOU NEED TO KNOW
Table 1: 568B Wiring Schematic
Table 2: 56...
Learning Module: Computer Networks
www.ppk.kpm.my < 3 >
THINGS YOU NEED TO HAVE
HARDWARE
Requirements Sample
1 Network Int...
Learning Module: Computer Networks
www.ppk.kpm.my < 4 >
6 LAN cable tester
7 Crimp tool
8 Cable stripper
9 Cutter
10 Screw...
Learning Module: Computer Networks
www.ppk.kpm.my < 5 >
INSTALLATION OF NETWORK INTERFACE CARDS (NIC)
LEARNING OUTCOME: 3....
Learning Module: Computer Networks
www.ppk.kpm.my < 6 >
ACTIVITIES:
A ) INSERT NETWORK INTERFACE CARDS (NIC)
1. Turn off t...
Learning Module: Computer Networks
www.ppk.kpm.my < 7 >
5. Insert the NIC into the empty PCI bus expansion slot.
Make sure...
Learning Module: Computer Networks
www.ppk.kpm.my < 8 >
2. Click Network and Internet Connections (Figure 2).
Figure 2
3. ...
Learning Module: Computer Networks
www.ppk.kpm.my < 9 >
4. Highlight Local Area Connection icon. Go to File menu. Click Pr...
Learning Module: Computer Networks
www.ppk.kpm.my < 10 >
6. If the driver is already installed, skip Part 2 and you are re...
Learning Module: Computer Networks
www.ppk.kpm.my < 11 >
2. Click Printers and Other Hardware (Figure 2).
Figure 2
3. Clic...
Learning Module: Computer Networks
www.ppk.kpm.my < 12 >
4. Click Next to start the installation of the NIC driver (Figure...
Learning Module: Computer Networks
www.ppk.kpm.my < 13 >
6. Check Yes, I have already connected the hardware and click Nex...
Learning Module: Computer Networks
www.ppk.kpm.my < 14 >
8. Check Install the hardware that I manually select from a list ...
Learning Module: Computer Networks
www.ppk.kpm.my < 15 >
10. Insert the floppy disk or CD-ROM which contains the driver an...
Learning Module: Computer Networks
www.ppk.kpm.my < 16 >
12. A Locate File window appears (Figure 12).
Figure 12
13. In Lo...
Learning Module: Computer Networks
www.ppk.kpm.my < 17 >
14. Highlight corresponding file and click Open. Figure 14 shows ...
Learning Module: Computer Networks
www.ppk.kpm.my < 18 >
16. Click Finish (Figure 16).
Figure 16
17. Click Yes to restart ...
Learning Module: Computer Networks
www.ppk.kpm.my < 19 >
ASSESSMENT:
1. Why do we need to turn off the PC and unplug the p...
Learning Module: Computer Networks
www.ppk.kpm.my < 20 >
CABLE CRIMPING AND TESTING – STRAIGHT CABLE
LEARNING OUTCOME: 3.4...
Learning Module: Computer Networks
www.ppk.kpm.my < 21 >
ACTIVITIES:
1. Skin off the cable jacket approximately 3cm by usi...
Learning Module: Computer Networks
www.ppk.kpm.my < 22 >
10.Push moderately to assure that all wires have
reached the end ...
Learning Module: Computer Networks
www.ppk.kpm.my < 23 >
Assessment:
1. Table below is 568B wiring schematic for a Local A...
Learning Module: Computer Networks
www.ppk.kpm.my < 24 >
CABLE CRIMPING AND TESTING – CROSSED CABLE
LEARNING OUTCOME: 3.4....
Learning Module: Computer Networks
www.ppk.kpm.my < 25 >
ACTIVITIES:
1. Skin off the cable jacket approximately 3cm by usi...
Learning Module: Computer Networks
www.ppk.kpm.my < 26 >
10.Push moderately to assure that all wires have reached
the end ...
Learning Module: Computer Networks
www.ppk.kpm.my < 27 >
ASSESSMENT:
1. Choose the correct pair of cabling that is used fo...
Learning Module: Computer Networks
www.ppk.kpm.my < 28 >
3.4.3 CONFIGURATION AND TESTING OF NETWORK
LEARNING OUTCOME: 3.4....
Learning Module: Computer Networks
www.ppk.kpm.my < 29 >
ACTIVITIES:
1. Click Start, then go to Settings. Click Control Pa...
Learning Module: Computer Networks
www.ppk.kpm.my < 30 >
3. Click Network Connections (Figure 3).
Figure 3
4. Highlight Lo...
Learning Module: Computer Networks
www.ppk.kpm.my < 31 >
5. Highlight Internet Protocol(TCP/IP) and click Properties (Figu...
Learning Module: Computer Networks
www.ppk.kpm.my < 32 >
7. Check ‘Use the following IP address’. Fill in the network info...
Learning Module: Computer Networks
www.ppk.kpm.my < 33 >
ASSESSMENT:
1. IP is an acronym for
_____________________________...
Learning Module: Computer Networks
www.ppk.kpm.my < 34 >
3.4.4 Communicating and Data Sharing
LEARNING OUTCOME: 3.4.4.1 Cr...
Learning Module: Computer Networks
www.ppk.kpm.my < 35 >
ACTIVITIES:
A ) SETTING PROPERTIES FOR DATA SHARING
1. Click Star...
Learning Module: Computer Networks
www.ppk.kpm.my < 36 >
3. Click Network Connections (Figure 3).
Figure 3
4. Highlight Lo...
Learning Module: Computer Networks
www.ppk.kpm.my < 37 >
5. Check Client for Microsoft Networks and File and Printer Shari...
Learning Module: Computer Networks
www.ppk.kpm.my < 38 >
7. My Documents window appears. Highlight My Pictures folder. Go ...
Learning Module: Computer Networks
www.ppk.kpm.my < 39 >
9. Click Next (Figure 9).
Figure 9
10. Click Next (Figure 10).
Fi...
Learning Module: Computer Networks
www.ppk.kpm.my < 40 >
11. If the PC is not connected to a network, windows shown in Fig...
Learning Module: Computer Networks
www.ppk.kpm.my < 41 >
13. Check ‘Determine the appropriate connections for me (Recommen...
Learning Module: Computer Networks
www.ppk.kpm.my < 42 >
15. Click Next (Figure 15).
Figure 15
16.Click Next (Figure 16).
...
Learning Module: Computer Networks
www.ppk.kpm.my < 43 >
17. A window configures your computer for networking will appear ...
Learning Module: Computer Networks
www.ppk.kpm.my < 44 >
19. Click Finish (Figure 19).
Figure 19
20. Click Yes to restart ...
Learning Module: Computer Networks
www.ppk.kpm.my < 45 >
B ) CREATING SHARED DRIVE
1. Click Start, then go to All Programs...
Learning Module: Computer Networks
www.ppk.kpm.my < 46 >
3. Click My Computer (Figure 3).
Figure 3
4. Highlight Local Disk...
Learning Module: Computer Networks
www.ppk.kpm.my < 47 >
5. Click If you understand the risk but still want to share the r...
Learning Module: Computer Networks
www.ppk.kpm.my < 48 >
7. Figure 7 shows an example of a shared drive.
Figure 7
C ) ACCE...
Learning Module: Computer Networks
www.ppk.kpm.my < 49 >
2. Click My Network Places then Entire Network. Next, click Micro...
Learning Module: Computer Networks
www.ppk.kpm.my < 50 >
ASSESSMENT:
1. Read the statement below, tick (•) if TRUE and cro...
Learning area 3_-_computer_networks_and_communications (1)
Upcoming SlideShare
Loading in...5
×

Learning area 3_-_computer_networks_and_communications (1)

102

Published on

Published in: Technology, Business
0 Comments
0 Likes
Statistics
Notes
  • Be the first to comment

  • Be the first to like this

No Downloads
Views
Total Views
102
On Slideshare
0
From Embeds
0
Number of Embeds
0
Actions
Shares
0
Downloads
8
Comments
0
Likes
0
Embeds 0
No embeds

No notes for slide

Transcript of "Learning area 3_-_computer_networks_and_communications (1)"

  1. 1. 1. What is it? This is a learning module for a specific Learning Outcome as stipulated in the Curriculum Specifications that is : € 3.4 Setting Network Facilities 2. Who is it for? This module is for students who are taking the ICT subject as their elective and for those who are interested in ICT. 3. What can be achieved? Upon completion of this module, you will be able to : € install Network Interface Card (NIC). € crimp and test straight cable and crossed cable. € configure and test network. € communicate and share data through network. 4. Is previous knowledge necessary? Yes. Before using this module, you should have learnt about basic concept of a computer network, hardware requirements and software requirements.
  2. 2. Learning Module: Computer Networks www.ppk.kpm.my < 1 > TOPIC: 3.4 SETTING NETWORK FACILITIES DURATION: 12 periods REFERENCES A. Books: Gary B. Shelly, Thomas J. Cashman, Misty E. Vermaat (2006), “Discovering Computers 2006: A Gateway To Information”, Thomson Course Technology Tamara Dean (2006), “Network + Guide to Networks”, Thomson Course Technology B. Website addresses: http://myschoolnet.ppk.kpm.my http://www.lanshack.com http://www.homenethelp.com http://www.crossover.asp http://www.microsoft.com/technet/prodtechnol/winxppro/maintain/filesharing.mspx
  3. 3. Learning Module: Computer Networks www.ppk.kpm.my < 2 > THINGS YOU NEED TO KNOW Table 1: 568B Wiring Schematic Table 2: 568A Wiring Schematic Pair Wire Pin Diagrams White/Blue 5 White/Blue Blue 4 White/Orange 1 White/Orange Orange 2 White/Green 3 White/Green Green 6 White/Brown 7 White/Brown Brown 8 Pair Wire Pin Diagrams White/Blue 5 White/Blue Blue 4 White/ Green 1 White/Green Green 2 White/Orange 3 White/Orange Orange 6 White/Brown 7 White/Brown Brown 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 Notes: 1. For patch cables, 568B wiring is the most common schematic. 2. There is no difference in connectivity between 568B and 568A cables. Both wiring should work fine on any system. 3. For straight through cable, both ends use the same wiring schematics (568B wiring schematic is recommended). 4. For a crossover cable, both ends use different wiring schematics.
  4. 4. Learning Module: Computer Networks www.ppk.kpm.my < 3 > THINGS YOU NEED TO HAVE HARDWARE Requirements Sample 1 Network Interface Card (NIC) 2 NIC driver 3 Switch / Hub 4 CAT5E cable (UTP cable) 5 RJ45 connectors
  5. 5. Learning Module: Computer Networks www.ppk.kpm.my < 4 > 6 LAN cable tester 7 Crimp tool 8 Cable stripper 9 Cutter 10 Screwdrivers
  6. 6. Learning Module: Computer Networks www.ppk.kpm.my < 5 > INSTALLATION OF NETWORK INTERFACE CARDS (NIC) LEARNING OUTCOME: 3.4.1.1 Insert Network Interface Cards (NIC) 3.4.1.2 Install drivers for the NIC DURATION: 2 periods REQUIREMENTS: Network Interface Card (NIC) NIC driver Screwdriver In this module you will learn how to install Peripheral Component Interconnect (PCI) Network Interface Card into a personal computer (PC) and install the driver for the card.
  7. 7. Learning Module: Computer Networks www.ppk.kpm.my < 6 > ACTIVITIES: A ) INSERT NETWORK INTERFACE CARDS (NIC) 1. Turn off the PC and unplug the power cable. It is to neutralize any static electric in PC. 2. Remove the casing of the PC. 3. Locate an empty PCI bus expansion slot in the motherboard. 4. Remove a back panel plate that corresponds to the expansion slot. Back panel plate PCI bus expansion slot
  8. 8. Learning Module: Computer Networks www.ppk.kpm.my < 7 > 5. Insert the NIC into the empty PCI bus expansion slot. Make sure the NIC is inserted properly and levelled. 6. Screw the NIC to back panel. 7. Reaffix the casing of the PC. B) INSTALL DRIVERS FOR THE NIC PART 1 : Check for installed NIC 1. Click Start, then go to Settings. Click Control Panel (Figure 1). Figure 1 Windows XP will automatically detect and install most network interface card drivers, so your drivers are already installed. You can check whether the driver has been installed or not, using the method below.
  9. 9. Learning Module: Computer Networks www.ppk.kpm.my < 8 > 2. Click Network and Internet Connections (Figure 2). Figure 2 3. Click Network Connections (Figure 3). Figure 3
  10. 10. Learning Module: Computer Networks www.ppk.kpm.my < 9 > 4. Highlight Local Area Connection icon. Go to File menu. Click Properties. (Figure 4). Figure 4 5. Your NIC should be listed under Connect Using. Figure 5 showing a NIC is already installed. Figure 5
  11. 11. Learning Module: Computer Networks www.ppk.kpm.my < 10 > 6. If the driver is already installed, skip Part 2 and you are ready for the assessment. 7. If there is no network card listed, click Cancel and start Part 2 to install the driver manually. PART 2 : Install Drivers For Windows XP 1. Click Start, then go to Settings. Click Control Panel (Figure 1). Figure 1
  12. 12. Learning Module: Computer Networks www.ppk.kpm.my < 11 > 2. Click Printers and Other Hardware (Figure 2). Figure 2 3. Click Add Hardware (Figure 3). Figure 3
  13. 13. Learning Module: Computer Networks www.ppk.kpm.my < 12 > 4. Click Next to start the installation of the NIC driver (Figure 4). Figure 4 5. A window searching for new hardware will appear (Figure 5). Figure 5
  14. 14. Learning Module: Computer Networks www.ppk.kpm.my < 13 > 6. Check Yes, I have already connected the hardware and click Next (Figure 6). Figure 6 7. Scroll down and highlight Add a new hardware device. Click Next (Figure 7). Figure 7
  15. 15. Learning Module: Computer Networks www.ppk.kpm.my < 14 > 8. Check Install the hardware that I manually select from a list (Advanced) and click Next (Figure 8). Figure 8 9. Scroll down and highlight Network adapters. Click Next. (Figure 9). Figure 9
  16. 16. Learning Module: Computer Networks www.ppk.kpm.my < 15 > 10. Insert the floppy disk or CD-ROM which contains the driver and click Have Disk (Figure 10). Figure 10 11. Click Browse (Figure 11). Figure 11
  17. 17. Learning Module: Computer Networks www.ppk.kpm.my < 16 > 12. A Locate File window appears (Figure 12). Figure 12 13. In Look in pull down menu, choose a device contains the driver and click it. Figure 13 showing CD Drive(E:) as an example. Figure 13
  18. 18. Learning Module: Computer Networks www.ppk.kpm.my < 17 > 14. Highlight corresponding file and click Open. Figure 14 shows winxp as an example. Figure 14 15. Click Next (Figure 15). Figure 15
  19. 19. Learning Module: Computer Networks www.ppk.kpm.my < 18 > 16. Click Finish (Figure 16). Figure 16 17. Click Yes to restart your computer and to complete your driver installation (Figure 17). Figure 17
  20. 20. Learning Module: Computer Networks www.ppk.kpm.my < 19 > ASSESSMENT: 1. Why do we need to turn off the PC and unplug the power cable before we start installing the network card? ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ 2. Mark T for True statements and F for False statements. _________ - a. NIC driver is only available in CD. _________ - b. A back panel plate that corresponds to the expansion slot has to be removed before inserting the NIC in your PC. _________ - c. The common protocol used in Network that supports Internet is TCP/IP. _________ - d. The NIC driver should be preinstalled before inserting NIC in your PC. 2. Explain briefly the steps to install the NIC driver in your PC. ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________
  21. 21. Learning Module: Computer Networks www.ppk.kpm.my < 20 > CABLE CRIMPING AND TESTING – STRAIGHT CABLE LEARNING OUTCOME: 3.4.2.1 Crimp and test Untwisted Pair (UTP) cable using straight cable technique 3.4.2.2 Exercise care and caution when crimping a cable DURATION: 2 periods REQUIREMENTS: CAT5E cable (3 meters) RJ45 connectors (2 units) Crimp tool Cable stripper Wire cutter LAN cable tester NOTE : A cable is needed to connect a computer to a wired local area network (LAN). There are two types of cables. The first is the “straight cable” which is used to connect computers through a hub. The second type is the “crossed cable” for a direct connection between two computers without using a hub. Connecting these cables is called cable crimping. This module shows how to crimp a straight cable using Untwisted Pair cable and RJ45 connectors.
  22. 22. Learning Module: Computer Networks www.ppk.kpm.my < 21 > ACTIVITIES: 1. Skin off the cable jacket approximately 3cm by using a cable stripper. 2. Untwist each pair, and straighten each wire between fingers. 3. Place the wires in the order of 568B schematic (refer to Table 1 on page 3). Connect all the wires together. 4. At this point, recheck the wiring sequence with the diagram. 5. Optional: Mark a distance of 1.5cm from the end of the cable jacket on the wires. 6. Hold the set and sorted wires together tightly, between the thumb, and the pointer finger. 7. Cut all the wires at 90o angle from the cable at 1.5cm from the end of the cable jacket by using a wire cutter. This is a very critical step. If the wires are not cut straight, they may not make contact with the connector pins. 8. Conductors should be at a 90o angle, and be 1.5cm long, prior to insertion into the connector. 9. Insert the wires into the RJ45 connector with the pins facing up.
  23. 23. Learning Module: Computer Networks www.ppk.kpm.my < 22 > 10.Push moderately to assure that all wires have reached the end of the connector. Be sure that the cable jacket goes into the back of the connector at 0.3cm. 11.Place the connector into a crimp tool, and squeeze hard so that the handle reaches its full swing. 12.Repeat step 1 to 11 for the other end of the cable. 13.Use a cable tester to test for proper continuity.
  24. 24. Learning Module: Computer Networks www.ppk.kpm.my < 23 > Assessment: 1. Table below is 568B wiring schematic for a Local Area Network. Identify the pin numbers of W, X, Y and Z. W X Y Z A 1 5 2 7 B 5 1 2 7 C 2 7 1 5 D 5 1 7 2 Pair Wire Pin White/Blue W White/Blue Blue 4 White/Orange X White/Orange Orange Y White/Green 3 White/Green Green 6 White/Brown Z White/Brown Brown 8
  25. 25. Learning Module: Computer Networks www.ppk.kpm.my < 24 > CABLE CRIMPING AND TESTING – CROSSED CABLE LEARNING OUTCOME: 3.4.2.1 Crimp and test Untwisted Pair (UTP) cable using crossed cable technique 3.4.2.2 Exercise care and caution when crimping a cable DURATION: 2 periods REQUIREMENTS: CAT5E cable (3 meters) RJ45 connectors (2 units) Crimp tool Cable stripper Wire cutter LAN cable tester NOTE :
  26. 26. Learning Module: Computer Networks www.ppk.kpm.my < 25 > ACTIVITIES: 1. Skin off the cable jacket approximately 3cm by using a cable stripper. 2. Untwist each pair, and straighten each wire between fingers. 3. Place the wires in the order of 568A schematic (refer to Table 2 on page3). Connect all the wires together. 4. At this point, recheck the wiring sequence with the diagram. 5. Optional: Mark a distance of 1.5cm from the end of the cable jacket on the wires. 6. Hold the set and sorted wires together tightly, between the thumb, and the pointer finger. 7. Cut all the wires at 90o angle from the cable at 1.5cm from the end of the cable jacket by using a wire cutter. This is a very critical step. If the wires are not cut straight, they may not make contact with the connector pins. 8. Conductors should be at a 90o angle, and be 1.5cm long, prior to insertion into the connector. 9. Insert the wires into the RJ45 connector with the pins facing up.
  27. 27. Learning Module: Computer Networks www.ppk.kpm.my < 26 > 10.Push moderately to assure that all wires have reached the end of the connector. Be sure that the cable jacket goes into the back of the connector at 0.3cm. 11.Place the connector into a crimp tool, and squeeze hard so that the handle reaches its full swing. 12.Repeat step 1 to 11 for the other end of the cable by placing wires in the order of 568B schematic. 13.Use a cable tester to test for proper continuity.
  28. 28. Learning Module: Computer Networks www.ppk.kpm.my < 27 > ASSESSMENT: 1. Choose the correct pair of cabling that is used for direct connection from PC to PC. A B C 2. What type of cable is used to connect two computers? _________________________________________________________________ _________________________________________________________________ 3. What is the requirement needed to crimp a crossed cable? _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ _________________________________________________________________ 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
  29. 29. Learning Module: Computer Networks www.ppk.kpm.my < 28 > 3.4.3 CONFIGURATION AND TESTING OF NETWORK LEARNING OUTCOME: 3.4.3.1 Configure the workstation to join a Local Area Network € Internet Protocol (IP) Address € Subnet Mask € Server name 3.4.3.2 Test the network connection. DURATION: 4 periods REQUIREMENTS: -
  30. 30. Learning Module: Computer Networks www.ppk.kpm.my < 29 > ACTIVITIES: 1. Click Start, then go to Settings. Click Control Panel (Figure 1). Figure 1 2. Click Network and Internet Connections (Figure 2). Figure 2
  31. 31. Learning Module: Computer Networks www.ppk.kpm.my < 30 > 3. Click Network Connections (Figure 3). Figure 3 4. Highlight Local Area Connection icon. Go to File menu. Click Properties. (Figure 4). Figure 4
  32. 32. Learning Module: Computer Networks www.ppk.kpm.my < 31 > 5. Highlight Internet Protocol(TCP/IP) and click Properties (Figure 5). Figure 5 6. Internet Protocol (TCP/IP) Properties window appears (Figure 6). Figure 6
  33. 33. Learning Module: Computer Networks www.ppk.kpm.my < 32 > 7. Check ‘Use the following IP address’. Fill in the network information for: i. IP address ii. Subnet Mask iii. Default Gateway (only if available) iv. Preferred DNS server (only if available) Use the network information given by your teacher. Figure 7 is an example of IP address. Click OK. Figure 7 8. Close all windows. You must restart your computer before the settings take effect. Given by teacher
  34. 34. Learning Module: Computer Networks www.ppk.kpm.my < 33 > ASSESSMENT: 1. IP is an acronym for ______________________________________________________________ ______________________________________________________________ 2. If your IP is 192.168.1.28, then the default setting for the subnet mask is ______. 255. ______. ______. 3. If your network is not working, list out the possible problems. ______________________________________________________________ ______________________________________________________________ ______________________________________________________________ ______________________________________________________________
  35. 35. Learning Module: Computer Networks www.ppk.kpm.my < 34 > 3.4.4 Communicating and Data Sharing LEARNING OUTCOME: 3.4.4.1 Create a shared folder DURATION: 2 periods REQUIREMENTS: -
  36. 36. Learning Module: Computer Networks www.ppk.kpm.my < 35 > ACTIVITIES: A ) SETTING PROPERTIES FOR DATA SHARING 1. Click Start, then go to Settings. Click Control Panel (Figure 1). Figure 1 2. Click Network and Internet Connections (Figure 2). Figure 2
  37. 37. Learning Module: Computer Networks www.ppk.kpm.my < 36 > 3. Click Network Connections (Figure 3). Figure 3 4. Highlight Local Area Connection icon. Go to File menu. Click Properties. (Figure 4). Figure 4
  38. 38. Learning Module: Computer Networks www.ppk.kpm.my < 37 > 5. Check Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks. These items are checked by default (Figure 5). Click Close. Figure 5 6. Click Start, then go to All Programs. Next, click Accessories. Click Windows Explorer (Figure 6). Figure 6
  39. 39. Learning Module: Computer Networks www.ppk.kpm.my < 38 > 7. My Documents window appears. Highlight My Pictures folder. Go to File menu. Click Sharing and Security (Figure 7). Figure 7 8. Click Network Setup Wizard (Figure 8). Figure 8
  40. 40. Learning Module: Computer Networks www.ppk.kpm.my < 39 > 9. Click Next (Figure 9). Figure 9 10. Click Next (Figure 10). Figure 10
  41. 41. Learning Module: Computer Networks www.ppk.kpm.my < 40 > 11. If the PC is not connected to a network, windows shown in Figure 11 will pop- up. Check Ignore disconnected network hardware and click Next. Figure 11 12. Check ‘This computer connects to the Internet through another computer on my network or through a residential gateway’ and click Next (Figure 12). Figure 12
  42. 42. Learning Module: Computer Networks www.ppk.kpm.my < 41 > 13. Check ‘Determine the appropriate connections for me (Recommended)’ and click Next (Figure 13). Figure 13 14. Fill in: i. Computer description ii. Computer Name Use the information given by your teacher. Figure 14 is an example windows and click Next Figure 14 Given by teacher
  43. 43. Learning Module: Computer Networks www.ppk.kpm.my < 42 > 15. Click Next (Figure 15). Figure 15 16.Click Next (Figure 16). Figure 16
  44. 44. Learning Module: Computer Networks www.ppk.kpm.my < 43 > 17. A window configures your computer for networking will appear (Figure 17). Figure 17 18. Check Just finish the wizard; I don’t need to run the wizard on other computers and click Next (Figure 18). Figure 18
  45. 45. Learning Module: Computer Networks www.ppk.kpm.my < 44 > 19. Click Finish (Figure 19). Figure 19 20. Click Yes to restart your computer (Figure 20). Figure 20
  46. 46. Learning Module: Computer Networks www.ppk.kpm.my < 45 > B ) CREATING SHARED DRIVE 1. Click Start, then go to All Programs. Next, click Accessories. Click Windows Explorer (Figure 1). Figure 1 2. My Documents window appears (Figure 2). Figure 2
  47. 47. Learning Module: Computer Networks www.ppk.kpm.my < 46 > 3. Click My Computer (Figure 3). Figure 3 4. Highlight Local Disk (C:) icon. Go to File menu. Click Sharing and Security (Figure 4). Figure 4
  48. 48. Learning Module: Computer Networks www.ppk.kpm.my < 47 > 5. Click If you understand the risk but still want to share the root of the drive, click here (Figure 5). Figure 5 6. Check Share this folder on the network and click Apply (Figure 6). Figure 6
  49. 49. Learning Module: Computer Networks www.ppk.kpm.my < 48 > 7. Figure 7 shows an example of a shared drive. Figure 7 C ) ACCESSING SHARED DRIVE 1. Click Start, then go to All Programs. Next, click Accessories. Click Windows Explorer (Figure 1). Figure 1
  50. 50. Learning Module: Computer Networks www.ppk.kpm.my < 49 > 2. Click My Network Places then Entire Network. Next, click Microsoft Windows Network and finally Mshome (Figure 2). All the computers connected to the network are shown on the right side of the window. Figure 2 3. Click any computers listed. Figure 3 shows School Computer Lab (Pc01) selected. Now you can access drive C: of Pc01. Figure 3 Computers connected to the network
  51. 51. Learning Module: Computer Networks www.ppk.kpm.my < 50 > ASSESSMENT: 1. Read the statement below, tick (•) if TRUE and cross (x) if FALSE. No Statement (€) or (x) 1. The user cannot set password protection on their shared files or folders. 2. We can enable file sharing and disable printer sharing at the same time. 3. We can allow or deny a user access to our shared files whenever we want. 4. To change access permissions you must be the owner, or have been granted permission to do so by the owner. CONGRATULATIONS !! YOU HAVE SUCCESSFULLY COMPLETED THIS MODULE. YOU ARE NOW ABLE TO SET NETWORK FACILITIES AND COMMUNICATE AND SHARE DATA THROUGH THE NETWORK.

×