1. REVIEWS - Heezy HTS15 Single Circuit 15 Amp
Manual Transfer Switch Powers Gas Furnace,
Boiler or Pumps up to 1875 Watts
ViewUserReviews
Average Customer Rating
5.0 out of 5
Product Feature
The HTS15 can be used on any 15 Amp 120-voltq
circuit, such as a forced-air furnace, gas fired
boiler, refrigerator/ freezer/ lighting circuits. If the
circuit you want to power is served by a 15 Amp
breaker then the HTS15 will be able to power it.
Pre-wired 18" of Aluminum Flex Conduit, 36+" ofq
wire, and all hardware is included, No extras
needed for most installs.
With the smallest footprint of any transfer switch itq
can be mounted anywhere, from the Circuit
Breaker to the Appliance or anywhere in between.
Includes step by step easy to follow instructions
for install.
Power only what you need and use a smallerq
generator that sips gas!
Lifetime No "BS" Warranty & 90 day No Questionsq
asked return policy
Read moreq
Product Description
The Heezy HTS15 transfer switch is designed for the control of a single circuit, such as a forced-air furnace,
connecting it to a generator in the event of a power failure. The attached 18" flexible aluminum conduit is
pre-wired and allows the Transfer Switch to be easily connected at the circuit breaker panel or the furnace or at
any point in between. Power can be supplied from a portable generator, inverter, RV generator, fuel cell or any
standby source capable of producing sufficient current to operate the desired load. The Heezy HTS15 Single
Circuit Transfer Switch can power any single phase circuit up to 15 Amps (1875 Watts). Simply plug a standard
grounded extension cord into the power outlet on your generator and into the built-in plug on the transfer
switch. Since it's grounded to the main whole house ground, you don't have to ground the generator separately.
Includes step by step easy to follow instructions for install. Read more