BMW INPA interface is an OBD2 scan tool which allows full diagnosis of BMW cars from 1998 to 2008. Build in 2 lines K and D-Can magistrial. Dealing with BMW complex ECU along the entire process chain requires reliable communication and data description. The BMW INPA OBD2 diagnostic Tool Set consists of a set of PC based applications which support engineers, technicians and developers in all aspects of communication with the vehicle and ECUs via a serial communication line. http://www.obd2cart.com/bmw-inpa-ediabas-kdcan-usb-interface-diagnostic-test-line-p-392.html

1. BMW INPA Interface - the BMW INPA OBD2 Diagnostic Tool
BMW INPA interface is an OBD2 scan tool which allows full diagnosis of BMW cars from 1998
to 2008. Build in 2 lines K and D-Can magistrial. Dealing with BMW complex ECU along the
entire process chain requires reliable communication and data description. The BMW INPA OBD2
diagnostic Tool Set consists of a set of PC based applications which support engineers, technicians
and developers in all aspects of communication with the vehicle and ECUs via a serial
communication line.
Support protocols
There are three support protocols of a BMW INPA interface: Fast magistral D-CAN and PT-CAN
(500 kbit/ s), Slow magistral K-CAN (100 kbit/ s) and Standard BMW ptotocol (BMW OBD
interface). The BMW OBD interface is meant for older cars from 1995 to 1998 which don’t need
K-line and from 1998 to 2008 for all models. The D-CAN is meant for: E83 od 09/2006 E60, E61
od 03/2007, E81, E87 od 03/2007, E90, E91, E92, E93 od 03/2007, E70 (new model X5), and R56
(new model MINI).
Functions of the BMW INPA interface diagnostic tool
The BMW INPA interface USB is compatible with all the OBD2-equiped vehicles, except for
older cars with both, the OBD2 and the 20pin connector installed. It is recommended that the
20pin connector be used for factory diagnostic only since the OBD2 connector will not be fully
wired. Functions of the BMW INPA interface include:
· Read and clear codes
· Driver programming
· Applu coding
· Adaptations and diagnosis
· Live data
· Component testing
· Maintenance procedure explaining
· Testing of pressure, current and resistance data through the connection with cars.
· Auto-coding and programming of gearbox, light control computer, engine, airbag and engine
anti-theft computer
The use of the Ediabas K USB interface just like any other computer-based tool requires that you
have some knowledge of computers and hardware/software setup. So it’s good if you contact your
technicians, preferably from the store where you plan to purchase the tool from, prior to the
purchase if you feel the computer skill necessity could be an issue.
Before you start using the BMW INPA Diagnostic Test Line, ensure that you check its
compatibility with your version of Windows before purchase. Due to the BMW specific protocols
used coupled with the difference between the models and years of BMW, contacting your dealers
is of necessity prior to purchasing with the year, model and fuel type of your car along with all
that you want to able to exactly do. Your sellers will likely advise on suitable solutions.

2. Before you start using the Ediabas K USB interface diagnostic tool, keep the battery notebook
fully charged so as to avoid “battery broken”. The battery should not be charged while the
diagnosis is underway. Prior to charging, ensure that the battery is fully discharged. During long
time diagnosis, you may knock down the battery and then connect the power line. This will protect
the battery life. Only start the diagnosis after all the icons on the bottom right of the screen have
been regularly displayed. Do not cut off the power supply or connector during test.
Benefits of using BMW INPA Diagnostic Test Line
· Reduced maintenance effort and cost reduction
· Fast and simple configuration of the GUI and communication data instead of programming
· Long-term application by supporting widespread ASAM standards
· Automatic generation of the specification Integration solutions for on-board/off-board
· One data set and one run time system for the entire lifecycle
· Support of all ECU use cases in Test, After Sales, Engineering and Production
· Open system architecture
· Learn only one system for different projects
· Proven track record
· Language in German and English
Product URL ： http://www.obd2cart.com/bmw-inpa-ediabas-kdcan-usb-interface-diagnostic-testline-p-392.html.