Today, most households run manifold of devices which are linked to the internet including laptops, computers, TV, gaming devices, smartphones, tablets etc. Wireless networking has made our life easy and with this you can use internet on your computers, laptops or other devices from anywhere in the house without cluttering too many cables.
Beginners Guide to TikTok for Search - Rachel Pearson - We are Tilt __ Bright...
How to keep your wireless home network safe and secure
1.
2. Here are Some Ways to Secure Your Wireless Home Network
Open up the Router Settings Page: It is of utmost importance to know how to access the wireless
settings of your router. In do this, type in “192.168.1.1” into your web browser and enter your username
and password. Usually it is different for all routers; hence check the user manual of the router.
3. Create an Exclusive Password for Your Safety: To secure your network is to change the default
password and create a unique one.You can create a new password from the Administration settings on the
settings page of the router. The default values are usually set as admin/password.
4. Make Sure to Change the SSID name of the Network: The Wireless Network name or the SSID of
your Wireless router is pre-defined as default. By changing the SSID name of your network is actually a
good idea to make your network much secure.
Enable Encryption: To enable encryption, go to wireless security settings on the configuration page of
the router. It would allow you to choose which security method you are willing to select. If you have
devices which are old, choose WEP or else choose WPA2. In order to access the network, enter a
passphrase. Set it differently which is hard to guess by others. Make sure you use a combination of
numbers, letters and special characters.
5.
6. Enable Firewalls On All Computers & Router: Most of the network feature in-built firewall capability,
but it also has an option to disable them. Make sure that the firewall of the router is turned on. For much
added protection, install and run personal firewall software on every computer that is connected to the
router.
7. Filtering Mac Addresses: In order to add an extra layer of security, add the Mac address to your devices
to the wireless settings of the router to make sure only the definite devices are able to connect to your Wi-
Fi network.
8. Upgrade the Firmware of the Router: Make a habit to check the manufacturer’s site to ensure that the
router you are using is running the up-to-date firmware. To check the present firmware version of the
router, you can do it from the router’s dashboard at 192.168.*.