12. Here’s an example of a Measure the perimeter of the gazebo
overhang, here it’s all four sides, on a
fog system design: patio, measure the three open sides for
best cooling results.
1) Measure the Area
For outdoor cooling systems, measure all open sides of
the area to be cooled. For Mistscaping, place nozzles in
groups of 3 - 5 for a more dramatic effect. Designate
the quantity of nozzles needed. For warehouse cooling
or humidification applications, please contact our
Technical Support Staff at info@fogco.com
2) Divide by 10
Take the total area measured in step 1 and divide by 10.
The result will be the number of 10 foot Kits that are
needed to complete the system. Decide which tubing is
preferred. Fogco offers Flexible Nylon, Rigid Copper, or
Rigid Stainless Steel. Add any required Mistscaping Kits.
3) Choose a Pump
For the mistscaping around the water
The Fogco pump range includes the Promotional Series
- 160 to 250 PSI; the Professional Direct Drive Series -
feature add 3-5 nozzle clusters with
1000 PSI; and the Premium Pulley Drive Series - 1000
1000 PSI for the best fog effect.
PSI. Review the capabilities of each pump range to
determine which Series is best suited for the application.
See the chart below for PSI and Flow Capacity specifi-
cations.
Product Order Example:
4) Include a Filter Starter Kit 40 ft. patio perimeter = 4 Stainless Steel Tubing Kits (92003)
The Fogco Filter Starter Kit is an all inclusive kit contain-
4 fog groupings = 4 Mistscaping Kits (92004)
ing all the necessary accessories to connect the pump to
the water supply on the low pressure side and to the 1gpm (gallons per minute) = 1 Premium Pump (92506)
fog line on the high pressure side. It is a requirement
for all installations. Do not use the Filter Starter Kit for Filtration & connection = 1 Filter Starter Kit (92000)
systems above 3 GPM.
Pump Series PSI Flow Rate Nozzle Capacity Kit Capacity
Call Customer Service
Promotional - Booster 160 .17 GPM 4 - 16 1-4
for assistance. For larger
systems, or if specific design
Promotional - Medium 250 .5 GPM 12 - 32 3-8
assistance is needed,
Professional - Direct Drive 1000 .5 to 4 GPM 8 - 132 2 - 33 please contact our
Technical Support Staff at
Premium - Pulley Drive 1000 1 to 5 GPM 16 - 164 4 - 41 info@fogco.com
Systems above 2 GPM may require ½" feed line.
13. Mistscaping ®
For a unique method of adding fog effects to water
features and garden areas, Mistscaping is the solution. Created
and developed by Fogco Systems, Inc., Mistscaping allows for
the subtle introduction of fog effects into any outdoor applica-
tion. Utilizing the Fogco 1000psi pump module and specially designed
Mistscaping risers, any standard landscaping project can be transformed into a
cool and soothing tropical showcase.
• Transforms any landscape These risers are attached to the feed line and placed throughout the land-
project into a dramatic
tropical scene scaping for an entrancing effect like no other. The special memory tubing
• Provides residual cooling used for the risers allows the fog to be direct-
throughout the project
area
ed and controlled for maximum effect. In
• Nozzle direction can be
addition, as the landscaping matures, the fog
precisely adjusted with can be re-directed as necessary.
memory feature of the
Mistscaping riser tubing The Mistscaping kit is designed to provide for
®
• U L rated unit for safe quick and easy installation with Fogco's special slip-lok fitting
and reliable outdoor
operation
design. The system provides for years of quality fog effect and outdoor cool-
®
• Provides 1000psi operat
ing by combining proven technology and a UL listed
ing pressure for maximum pulley pump design. The systems can be used for any residential, commercial,
fog and cooling effects
or industrial application.
Transform your surroundings with Mistscaping by Fogco Systems, Inc.
14. Cooling
Outdoor fog systems have been effectively used in out-
door cooling applications for decades. These systems, when
properly designed and installed, can provide cooling of out-
door temperatures by up to 40 degrees Fahrenheit with virtu-
ally no noticeable increase in the relative humidity. Applications will include
restaurants, theme parks, hotels and resorts, spectator arenas, tennis courts,
golf facilities, boats and RVs, fountains, waterfalls, and patios, etc
• Increases comfort level for all
By using 1000 PSI, atomizing the water droplets to a size as small as 5
outdoor environments
• Drops outdoor temperature microns (5 millionths of a meter) in diameter is possible. At this level, 'flash
up to 40 degrees Fahrenheit evaporation' occurs reducing the ambient temperature. This process, known as
• Dramatically improves condi
'Thermal Dynamics', is effective because water
tions for cattle, poultry, and
hog industries requires energy (600 calories of heat to evapo-
• Repels flying insects, pollen, rate 1 gram of water) to evaporate. This energy
dust, and airborne particulates
exchange results in reduced temperatures.
• Drastically reduces energy con-
sumption for industrial A/C and The overall effectiveness of the system will depend
evaporative cooling units
on existing temperature and humidity levels. As the temperature rises
• Improves overall efficiencies
and working conditions in metal (85 degrees Fahrenheit to 115 degrees Fahrenheit is ideal), and humidity levels
forging, refineries, and con
drop (above 90% performance is marginal, 40% to 90% performance is good,
struction sites
below 40% performance is excellent), the systems results can be dramatic.
As with any evaporative cooling process, the more moisture evaporated,
the greater the cooling results.
15. Cooling Fans
Outdoor environments can be enhanced with the use
of a FOGCO Desert Fog 1000 Cooling Fan. These high per-
formance units include a 1,000 psi FOGCO System high pres-
sure pump module; 11,000 CFM high quality fan with an
adjustable tilting head and a 90 degree oscillating capacity; a stainless steel
fog ring with up to 12 nozzles, and a 5 micron filter cartridge with housing.
The unit can operate as fan only,
• A refreshing alternative to
fan with fog, or fog only and can provide cooling up to 35 degrees Fahrenheit.
heat associated with outdoor
activities This will provide a refreshing alternative to the heat associated with outdoor
• Provides improved cooling activities including sporting events, restaurants, pools, stadiums,
capacity theme parks and golf courses.
• Portable or Wall mount units Due to its versatility, the Desert Fog 1000
available
Cooling Fan can also provide on-site recovery and
• Commercial, Industrial
and Agricultural uses hydration from heat exposure associated with firefight-
• Stationary or oscillating ing, foundry operations, welding shops, auto racing pit
operation areas and warehouses. In addition, the increased airflow
• Effective in higher humidity from the unit can improve the cooling capacity for any
climates
outdoor mist or fog application.
For industrial or agricultural needs, the Desert
Fog 1000 can stimulate improved productivity and well being for horses, cat-
tle, poultry and hogs. The units are also used extensively in greenhouses to
boost plant growth and development for commercial growers
and nurseries.
16. Humidification
There are many commercial and industrial applications
where artificially controlling humidity levels can provide a signifi-
cant improvement to the overall operation. By specifically setting
and maintaining humidity, temperature, and air exchange standards
for the operation, overall profitability is enhanced. For these spe-
cific situations, fog systems are the ideal solution.
• Ensures proper EMC levels In wine storage applications, increasing the relative humidity can dramatical-
ly reduce the evaporation of wine through the oak barrels.
• Reduce static electricity
One of the keys to improving the operation and the quality of the products
produced in the woodworking industry is to properly maintain the Equilibrium
• Maintain ideal moisture content
Moisture Content (EMC). This is the moisture content within the wood fibers
• Maximize product stability where moisture is neither gained nor lost. Maintaining a stable EMC will minimize
& handling moisture content changes during servicing. This will effectively eliminate many of
the quality issues associated with woodworking.
• Reduce incidence of dust fires Paper production and storage facilities also
benefit from a controlled environment. Because
• Reduce evaporation
paper products can readily gain and lose moisture, a
constantly controlled humidity level is critical to con-
sistent and improved quality in the end product.
As with other industries, a typical textile operation can
also derive significant benefit from environmental control by use of a
FOGCO System. Properly maintained humidity levels, usually between 50% and
65%, will result in improved quality and minimal downtime or rejections. It does
this because ideal humidity levels will actually increase the tensile strength of all nat-
ural fibers. The enhanced production capacity and reduced waste creates a more
profitable textile operation.
In addition, static electricity can be removed making the yarn more work-
able and controllable and resulting in less yarn separation. It also controls 'cotton
fly' and residual airborne lint.
17. Odor & Dust
Fog systems are ideal for eliminating odors associated with solid
waste treatment facilities, microbial decomposition of animal waste, and
noxious volatile compounds. Some of the more common problems
include carbon dioxide, ammonia, hydrogen sulfide, and methane.
Although carbon dioxide and methane are odorless, they can be lethal.
ODOR CONTROL The quality components and proper system design of the
FOGCO System allow for an efficient and economical delivery system for all odor removal
• One of the most effective chemicals. Utilizing a simplistic pressurized water supply, the FOGCO System is far less
methods for treatment expensive to operate and maintain than traditional air injection systems. The fog systems
of the odors associated with can even be used to economically remove workplace related odors and are designed for
organic waste
both interior and exterior applications.
• Less expensive to operate and From landfills to waste treatment facilities; from stockyards to hog farms, virtually
maintain than traditional air any odor problem can be effectively countered with the FOGCO line of high quality fog
injection systems products. The FOGCO System is YOUR high quality odor control solution.
Fog system applications for odor suppression include :
• Helps eliminate hazardous Chemical plants, Solid Waste and Waste Transfer Stations,
working conditions
Construction Sites and equipment, Landfills and Garbage
Dumps, Industrial Odors, Aeration Ponds, Composting
Facilities, Poultry and Livestock Facilities, Food Processing
DUST CONTROL
Plants, Refineries, and Paper mills.
• Effectively removes breathable In addition to the ability to provide odor neutral-
and fugitive dust izing, fog systems have shown to be an effective method for
dust suppression, dust abatement, and air filtration. They can also con-
• Meets or exceeds the EPA PM trols flies, and suppress odor causing pathogens.
10 standards When properly designed and installed, the FOGCO System produces a high con-
centration of 10 micron fog droplets. This size water droplets (10 millionths of a meter in
• Components and are UL and
CE rated diameter) provide optimum performance for attraction and suppression of PM 10 and
smaller dust particles. The systems can effectively remove breathable and fugitive dust sup-
• Programmable controllers with pression from .1 to 1000 microns. Dust surrounded by dense fog has little chance to
remotely located sensors escape. Because of the high standard of quality and industry experience, FOGCO Systems
meet or exceed the EPA PM 10 standards for dust suppression.
Applications include; Asbestos Abatement, Coal Dust Suppression,
Quarries and Rock Crushing Equipment, Grain Silos, Slag Works, Conveyor Belt
Drop Points, and Construction and Land Development Sites
22. PROMOTIONAL SERIES PUMPS
The Fogco Promotional Series pump range includes a 160 PSI Booster Pump
and a 250 PSI Medium Pressure Pump.
The Medium Pressure Pump utilizes a brass rotary pump design and sealed bear-
ings eliminating the need for oil lubrication and requires no maintenance. The
Medium Pressure Pump produces up to 250 PSI while providing 1.0 gallons per
minute. It is designed for light duty residential applications where price is the pri-
mary consideration and the Booster Pump does not provide sufficient flow.
MEDIUM PRESSURE PUMP
MEDIUM PRESSURE 110V MODEL SPECIFICATIONS
Model GPM Nozzle Pressure HP Voltage Amp Dimension Weight
• 1/2hp motor 50/60hz Number Capacity Rating Rating 50/60 Hz Rating L x W x H inches Lbs
• 250 PSI / 17 Bar 92501 .38 4-24 250psi .5 110V 7.2 14x10x8 inches 32
• 3/8” FNPT Connections 92502 .75 24-48 250psi .5 110V 7.2 14x10x8 inches 32
• Outdoor rated vented enclosure 92503 1.1 48-72 250psi .5 110V 7.2 14x10x8 inches 32
• Brass rotary pump
• Preset by-pass regulator valve MEDIUM PRESSURE 220V MODEL SPECIFICATIONS
• Electro-galvinized enclosure Model LPM Nozzle Pressure HP Voltage Amp Dimension Weight
• Quiet operation Number Capacity Rating Rating 50/60 Hz Rating L x W x H inches Lbs
• Durable powder coat finish 92924 1.4 4-24 250psi .5 220V 3.6 14x10x8 inches 32
• Solenoid valve 92925 2.8 24-48 250psi .5 220V 3.6 14x10x8 inches 32
• 6 ft/1.8m power cord 92926 4.1 48-72 250psi .5 220V 3.6 14x10x8 inches 32
• On/off switch
• One year warranty
The Booster Pump is both CE certified and listed in Underwriters Laboratory (UL)
'Motor Operated Water Pump' classification. The Booster Pump utilizes a
diaphram style pump with sealed bearings and can produce up to 160 PSI while
providing up to 10 gallons per hour. It is designed for smaller residential misting
applications when price is the primary consideration.
Booster Pump
• UL listed & CE certified BOOSTER 50/60HZ MODEL SPECIFICATIONS
• Outdoor rated
Model GPM Nozzle Pressure Voltage Dimension Weight
• Wall mount enclosure Number Capacity Rating L x W x H inches lbs
• Quiet diaphragm pump 92512 0.18 15 160psi 110V 13x7x4 14
• 12V, 110V and 220V versions 92504 0.18 15 160psi 12VDC 7.5x3.5x4 5.2
• 160 PSI / 11 Bar 92532 0.18 15 160psi 220V 13x7x4 14
• 3/8" Slip-Lok connections
• Built in safety bypass
• 6 ft/1.8m power supply cord
• Patented
• Uses only 40 watts
• 145 degree thermal overload
• On/off switch UL
®
• One year warranty
LISTED
CERTIFIED
110V 12V DC
BOOSTER PUMP BOOSTER PUMP
w w w. f o g c o . c o m
23. 1
PRE-PACKED KITS
The Fogco Pre-Packed Kits are designed to provide for ultimate convenience in
ordering, stocking, and selling of a Fogco system and simplify the system planning
and installation process. The kits include a Filter Starter pack; a 10 foot Nylon,
Copper, or Stainless Steel tubing packs; and a 5 nozzle Mistscaping pack.
FILTER STARTER KIT #92000 GO TO FILTERS
Qty Part No. Description
Size
1 10103 Nozzle Cleaner 8oz.
1 92544 Hose adapter Hose x ½" NPT fitting
1 92608 Filter cartridge
1 92609 Filter housing
1 92700 nylon tubing 50' roll
1 92630 Slip-lok T nozzle fitting
1 92706 Slip-lok end plug
1 92707 Slip-lok male adapter 3/8” x 3/8”NPT
1 92854 Slip-lok male adapter ½" x 3/8”NPT
3 92855 Slip-lok male adapter ½" x 1/2”NPT
5 92714 Insulated tubing clamp
1 92822 Compression union tee
2 92823 Compression union elbow
1 92834 Compression union cap
10’ 92853 ½" low pressure tubing
2 93503 Automatic drain valve
5 NOZZLE MISTSCAPING KIT #92004 GO TO MISTSCAPING
Qty Part No. Description
1 92706 Slip-lok end plug
5 93225 Mistscaping riser assembly
5 93512 .012 nozzle
10' NYLON KIT #92001 GO TO FLEXIBLE TUBING, SLIP LOK
Qty Part No. Description
4 92630 Slip-lok T nozzle fitting
8 92714 Insulated tubing clamps
4 92713 30" section of nylon tubing
4 93512 .012 nozzle
10' COPPER KIT #92002 GO TO COPPER TUBING & FITTINGS
Qty Part No. Description
8 92714 Insulated tubing clamps
1 92820 Compression union fitting
1 92963 10' prefabricated copper line with 30" nozzle spacing
4 93512 .012 nozzle
10' STAINLESS STEEL KIT #92003 GO TO SS TUBING, FITTINGS
Qty Part No. Description
8 92714 Insulated tubing clamps
1 92820 Double-ferruled compression union fitting
1 93081 10' prefabricated stainless line with 30" nozzle spacing
4 93512 .012 nozzle
